User's Manual

Table Of Contents
Note: Make sure the photo print settings you select match your current printer settings. For information on changing printer
photo settings, see “Using the Photo Card menu” on page 20.
1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see
the instructions that came with the paper.) For more information, see “Loading paper” on page 31.
2 Insert a memory card. For more information, see “Inserting a memory card” on page 41.
3 Press
or repeatedly until Print Photos appears.
4 Press
.
5 Press
or repeatedly until Print DPOF appears.
6 Press Start Color or Start Black.
Using a PictBridge-enabled digital camera to control printing photos
You can connect a PictBridge-enabled digital camera to the printer, and use the buttons on the camera to select and print
photos.
1 Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the digital camera.
2 Insert the other end of the cable into the PictBridge port on the front of the printer.
Warning: Do not touch the USB cable, any network adapter, or the printer in the area shown while actively printing
from a PictBridge-enabled digital camera. A loss of data can occur. Also, do not remove the USB cable or network
adapter while actively printing from a PictBridge-enabled digital camera.
Lexmark Confidential until announced
Working with photos
49