User's Manual

Notes:
• Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For more information, see the
camera documentation.
• The printer recognizes one active media device at a time. If you insert more than one media device, a message
appears on the display prompting you to designate the device you want the printer to recognize.
• If you have a memory card inserted when you connect a PictBridge-enabled camera, an error message will be
displayed telling the you to remove one of the devices.
• If the PictBridge connection is successful, the following appears on the printer display: PictBridge camera
detected. Press to change settings. If any other message appears, see “Error messages” on
page 90.
• Values selected within the menu items are the settings used for Pictbridge printing if no explicit selection is made
from the camera.
3 Follow the instructions in the camera documentation to select and print photos.
Note: If the printer is turned off while the camera is connected, you must disconnect and then reconnect the camera.
Printing photos using the computer
Note: To print photos or images from a Web page, see “Printing photos or images from a Web page” on page 37.
Viewing / Printing photos from the Photo Library
1 From the desktop, double-click the Lexmark Imaging Studio icon.
2 Click View / Print Photo Library.
3 Click to select the photo(s) you want to print.
4 From the Imaging Studio taskbar located at the bottom of the screen, click Photo Prints.
5 From the Quality drop-down list, select a copy quality.
6 From the Paper Size in Printer drop-down list, select the paper size.
7 To select multiple prints of a photo, or to select photo sizes other than 4 x 6 in. (10 x 15 cm), select the options you
want in the table. Use the drop-down list in the last column to view and select other sizes.
8 Click Print Now in the bottom right corner of the screen.
Printing photos from a media device using the computer
1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see
the instructions that came with the paper.) For more information, see “Loading paper” on page 31.
2 Insert a CD or any media device into the computer.
a If you are using Windows XP or Windows Vista, a “What do you want Windows to do?” screen appears. Click
Transfer Photos to your computer using the Lexmark Imaging Studio.
b If you are using Windows 2000:
1 From the desktop, double-click the Lexmark Imaging Studio icon.
2 Click Transfer Photos.
3 Click Select photos to print.
4 To print all photos, click Print.
5 To print selected photos, click Deselect All.
6 Click to select the photo(s) you want to print.
Lexmark Confidential until announced
Working with photos
50