X46x Series User's Guide February 2009 Machine type(s): 7014, 4569, 4570 Model(s): 431, 636, 63W, n01, n02, g01, g02, n11, n12, g11, g12, hn1, hn2, wh1, wh2 www.lexmark.
Contents Safety information...........................................................................15 Learning about the printer.............................................................17 Thank you for choosing this printer!............................................................................................................................17 Finding information about the printer.....................................................................................................................
Changing port settings after installing a new network Internal Solutions Port...........................................65 Setting up serial printing..................................................................................................................................................67 Minimizing your printer's environmental impact.....................70 Saving paper and toner.........................................................................................................................
Paper capacities............................................................................................................................................................................... 95 Printing...............................................................................................96 Printing a document..........................................................................................................................................................
Creating a custom job (job build) ...........................................................................................................................................110 Pausing the current print job to make copies........................................................................................................111 Placing information on copies.....................................................................................................................................
E-mail File Name............................................................................................................................................................................121 E-mail Message ..............................................................................................................................................................................121 Resolution.....................................................................................................................
Content.............................................................................................................................................................................................140 Sides (Duplex) ................................................................................................................................................................................141 Resolution...........................................................................................................
Advanced Imaging .......................................................................................................................................................................151 Scanning to a flash drive................................................................................................................................................152 Improving scan quality................................................................................................................................
Fax Settings menu........................................................................................................................................................................194 E-mail Settings menu ..................................................................................................................................................................203 FTP Settings menu.......................................................................................................................
240–249 paper jams ....................................................................................................................................................................245 250 paper jam ................................................................................................................................................................................246 251 paper jam .....................................................................................................................
Scan Document Too Long .........................................................................................................................................................257 Scanner ADF Cover Open ..........................................................................................................................................................257 Securely clearing disk space ..........................................................................................................................
84 PC Kit life warning...................................................................................................................................................................263 88 Cartridge low............................................................................................................................................................................263 88.yy Cartridge nearly low.........................................................................................................
Drawers.............................................................................................................................................................................................278 Flash memory card.......................................................................................................................................................................278 Hard disk with adapter......................................................................................................
Safety information CAUTION—POTENTIAL INJURY: See the enclosed Safety Sheet before making any cable or electrical connection. Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible. Do not place or use this product near water or wet locations. CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm.
This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts. CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls.
Learning about the printer Thank you for choosing this printer! We've worked hard to make sure it will meet your needs. To start using your new printer right away, use the setup materials that came with the printer, and then skim the User’s Guide to learn how to perform basic tasks. To get the most out of your printer, read the User’s Guide carefully, and make sure you check the latest updates on our Web site.
What are you looking for? Find it here The latest supplemental information, updates, and technical support: Lexmark Support Web site—support.lexmark.com • • • • • Documentation Driver downloads Note: Select your region, and then select your product to view the appropriate support site. Support telephone numbers and hours of operation for your region or country can be found on the Support Web site or on the printed warranty that came with your printer.
Basic model 3 2 1 8 7 6 5 1 Front door release button 2 Printer control panel 3 Automatic Document Feeder (ADF) 4 Standard exit bin with overhead light 5 Paper stop 6 Standard 250-sheet tray 7 Multipurpose feeder door 8 Front door Learning about the printer 19 4
1 System board locks 2 Locking device 3 Ethernet port 4 USB port Note: Use this USB port to connect the printer to the computer. 5 Fax wall connection port Note: The Fax ports are present only when a fax card is installed. 6 Fax telephone connection port Note: The Fax ports are present only when a fax card is installed.
• Keep the printer: – Away from the direct airflow of air conditioners, heaters, or ventilators – Free from direct sunlight, humidity extremes, or temperature fluctuations – Clean, dry, and free of dust • Allow the following recommended amount of space around the printer for proper ventilation: 1 2 5 3 4 1 Top 254 mm (10 in.) 2 Right Side 203 mm (8 in.) 3 Rear 305 mm (12 in.) 4 Front 203 mm (8 in.) 5 Left Side 76 mm (3 in.
Understanding the ADF and scanner glass Automatic Document Feeder (ADF) Scanner glass Use the ADF for multiple-page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). You can use the ADF or the scanner glass to scan documents. Using the ADF The ADF can scan multiple pages, including duplex pages. If duplex settings are selected, the ADF scans both sides of the page automatically.
Understanding the printer control panel 1 2 1 4 GHI 7 PQRS * 2 ABC 5 JKL 8 3 DEF 6 MNO 9 TUV WXYZ 0 # 3 4 5 8 Item 7 6 Description 1 Display View scanning, copying, faxing, and printing options as well as status and error messages. 2 Keypad Enter numbers or symbols on the display. 1 4 GHI 7 PQRS * 3 2 ABC 5 JKL 8 3 DEF 6 MNO 9 TUV WXYZ 0 # Dial Pause • Press to cause a two- or three-second dial pause in a fax number.
Item Description 6 Start 7 Indicator light • Press to initiate the current job indicated on the display. • From the home screen, press to start a copy job with the default settings. • If pressed while a job is scanning, the button has no effect. Indicates the printer status: • • • • 8 Stop Off—The power is off. Blinking green—The printer is warming up, processing data, or printing. Solid green—The printer is on, but idle. Blinking red—Operator intervention is needed.
Display item 5 Status message bar Description • Shows the current printer status such as Ready or Busy. • Shows printer conditions such as Toner Low. • Shows intervention messages to give instructions on what you should do so the printer can continue processing, such as Close door. 6 Status/Supplies Appears on the display whenever the printer status includes a message requiring intervention. Touch it to access the messages screen for more information on the message, including how to clear it.
Sample touch screen Button Function Home Returns to the home screen Down arrow Opens an options screen Left scroll decrease Scrolls to another value in decreasing order Right scroll increase Scrolls to another value in increasing order Left arrow Scrolls left Right arrow Scrolls right Back Navigates back to the previous screen Learning about the printer 26
Other touch-screen buttons Button Function Submit Saves a value as the new default setting Down arrow Moves down to the next screen Up arrow Moves up to the next screen Unselected radio button This is an unselected radio button. The radio button is gray to show it is unselected. Selected radio button This is a selected radio button. The radio button is blue to show it is selected. Cancel Jobs Opens the Cancel Jobs screen. The Cancel Jobs screen shows three headings: Print, Fax, and Network.
Button Cancel Select Function • Cancels an action or a selection • Cancels out of a screen and returns to the previous screen Opens the next related menu or menu item Features Feature Description Menu trail line: A Menu trail line is located at the top of each menu screen. This feature acts as a Menus Settings Copy Settings trail, showing the path taken to arrive at the current menu. It gives the exact location within the menus.
Additional printer setup Installing internal options CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Accessing the system board to install internal options Note: This task requires a flathead screwdriver. CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
2 Lift the front of the scanner unit to open the system board. 3 Use the following illustration to locate the appropriate connector. Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors.
Installing a memory card CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. Warning—Potential Damage: System board electronic components are easily damaged by static electricity.
4 Align the notches on the memory card with the ridges in the connector. 1 Notches 2 Ridges 5 Push the memory card straight into the connector until it clicks into place. Note: After the memory card is installed, make sure the memory card connector latches return to the latched vertical position and are secure against the card. 6 Release the system board access latch, and then close the system board door by lowering the scanner.
Installing a flash memory or firmware card The system board has two connections for an optional flash memory or firmware card. Only one of each may be installed, but the connectors are interchangeable. Note: This task requires a flathead screwdriver. CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing.
3 Holding the card by its sides, align the plastic pins on the card with the holes on the system board. 1 Plastic pins 2 Metal pins 4 Push the card firmly into place. Notes: • The entire length of the connector on the card must touch and be flush against the system board. • Be careful not to damage the connectors. 5 Release the latch, and then close the system board door by lowering the scanner.
6 Push in on the screws while rotating them clockwise a quarter turn to lock the system board into place. Warning—Potential Damage: Make sure the system board is locked to prevent possible damage to the printer if it is moved. Installing an Internal Solutions Port The system board supports one optional Lexmark Internal Solutions Port (ISP). Install an ISP for additional connectivity options. Note: This task requires a #2 Phillips screwdriver and a flathead screwdriver.
3 Locate the appropriate connector on the system board. Note: If an optional printer hard disk is currently installed, then the printer hard disk must first be removed. To remove the hard disk: a Unplug the printer hard disk interface cable from the system board, leaving the cable attached to the printer hard disk. To unplug the cable, squeeze the paddle at the plug of the interface cable to disengage the latch before pulling the cable out.
b Remove the screws holding the printer hard disk in place. c Remove the printer hard disk by pulling it upward to unseat the standoffs.
d Remove the thumbscrews that attach the printer hard disk mounting bracket to the printer hard disk, and then remove the bracket. Set the printer hard disk aside. 4 Remove the metal cover from the ISP opening.
5 Align the posts of the plastic tee to the holes in the system board, and then press downward until the tee snaps into place. Be sure each post of the tee has latched completely, and that the tee is seated firmly onto the system board. 6 Install the ISP onto the plastic tee. Angle the ISP over the plastic tee, and then approach the plastic tee so that any overhanging connectors will pass through the ISP opening in the system board cage.
8 Insert the long thumbscrew, into the hole closest to the white connector, and turn it clockwise enough to hold the ISP in place. Do not tighten the thumbscrew at this time. 9 Attach the two provided screws to secure the ISP mounting bracket to the system board cage. 10 Tighten the long thumbscrew. Note: Do not overtighten the thumbscrew. 11 Insert the plug of the ISP interface cable into the receptacle of the system board. Note: The plugs and receptacles are color coded.
12 If a printer hard disk was previously installed, then attach the printer hard disk to the ISP. For more information, see “Installing a printer hard disk” on page 43. 13 Release the latch, and then close the system board door by lowering the scanner. 14 Push in on the screws while rotating them clockwise a quarter turn to lock the system board into place. Warning—Potential Damage: Make sure the system board is locked to prevent possible damage to the printer if it is moved.
Installing a printer hard disk The optional printer hard disk can be installed with or without a Lexmark Internal Solutions Port (ISP). Note: This task requires a #2 Phillips screwdriver and a flathead screwdriver. CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing.
To install a printer hard disk onto the ISP: a Using a flathead screwdriver to loosen the screws, remove the thumbscrews that attach the printer hard disk mounting bracket to the printer hard disk, and then remove the bracket. b Align the standoffs of the printer hard disk with the holes in the ISP, and then press downward on the printer hard disk until the standoffs have seated into place. c Insert the plug of the printer hard disk interface cable into the receptacle of the ISP.
To install a printer hard disk directly onto the system board: a Align the standoffs of the printer hard disk with the holes in the system board, and then press downward on the printer hard disk until the standoffs have seated into place.
b Attach the two provided screws to secure the printer hard disk mounting bracket. c Insert the plug of the printer hard disk interface cable into the receptacle of the system board. Note: The plugs and receptacles are color coded. 4 Release the latch, and then close the system board door by lowering the scanner.
5 Push in on the screws while rotating them clockwise a quarter turn to lock the system board into place. Warning—Potential Damage: Make sure the system board is locked to prevent possible damage to the printer if it is moved. Installing a fax card Note: This task requires a #2 Phillips screwdriver and a flathead screwdriver.
3 Remove the metal cover from the fax card opening. 2 1 4 Insert the fax card, and then tighten the two screws to secure the fax card mounting bracket.
5 Insert the plug of the fax card interface cable into the receptacle of the system board. 6 Release the latch, and then close the system board door by lowering the scanner. 7 Push in on the screws while rotating them clockwise a quarter turn to lock the system board into place. Warning—Potential Damage: Make sure the system board is locked to prevent possible damage to the printer if it is moved.
Installing hardware options Installing a 250- or 550-sheet drawer The printer supports one optional drawer; you can install a 250- or 550-sheet drawer. CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing.
6 Align the printer with the drawer, and then lower the printer into place. Attaching cables Connect the printer to the computer using a USB cable, or to the network using an Ethernet cable.
1 USB port 2 Ethernet port Verifying printer setup Once all hardware and software options are installed and the printer is turned on, verify that the printer is set up correctly by printing the following: • Menu settings page—Use this page to verify that all printer options are installed correctly. A list of installed options appears toward the bottom of the page. If an option you installed is not listed, then it is not installed correctly. Remove the option and install it again.
Printing a network setup page If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration. 1 Make sure the printer is on and Ready appears. 2 On the home screen, touch . 3 Touch Reports. 4 Touch Network Setup Page. The network setup page prints and the printer returns to the home screen.
Updating available options in the printer driver Once the printer software and any options are installed, it may be necessary to manually add the options in the printer driver to make them available for print jobs. For Windows users 1 Do one of the following: In Windows Vista a b c d Click . Click Control Panel. Click Hardware and Sound. Click Printers. In Windows XP a Click Start. b Click Printers and Faxes. In Windows 2000 a Click Start. b Click Settings Printers. 2 Select the printer.
4 From the pop-up menu, choose Installable Options. 5 Add any installed hardware options, and then click Apply Changes. Setting up wireless printing Note: Wireless printing is not standard on all printer models. Follow these steps to set up your printer CAUTION—POTENTIAL INJURY: See the enclosed Safety Sheet before making any cable or electrical connection. Note: Do not connect cables until instructed to do so. 1 Set up the printer hardware. For more information, see the Setup Guide.
• Security Method—There are three basic options for Security Method: – WEP key If your network uses more than one WEP key, enter up to four in the provided spaces. Select the key currently in use on the network by selecting the Default WEP Transmit Key. or – WPA or WPA2 passphrase WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set for the same type on the router and on the printer, or the printer will not be able to communicate on the network.
Make sure the printer and computer are fully on and ready. Do not connect the USB cable until instructed to do so on the screen. 2 From the printer control panel, select your language and country or region, and then touch Continue. 3 Select your time zone, and then touch Continue. 4 Deselect any function you plan to set up later, such as Fax or E-mail, and then touch Continue. 5 Select any additional buttons you want to display on the home screen, and then touch Continue.
10 Insert the Software and Documentation CD. 11 Click Install Printer and Software. 12 Click Agree to agree to the License Agreement. 13 Select Suggested, and then click Next. 14 Click Wireless Network Attach. 15 Remove the label covering the USB port on the back of the printer. 16 Connect the cables in the following order: a Temporarily connect a USB cable between the computer on the wireless network and the printer.
b If you plan to set up fax now, then connect the fax cables. See the User's Guide on the Software and Documentation CD for help deciding how to connect the cables. 17 Follow the on-screen instructions to complete the software installation. Note: Basic is the recommended path to choose. Choose Advanced only if you want to customize your installation or if your network uses 802.1x security.
5 Deselect any function you plan to set up later, such as Fax or E-mail, and then touch Continue. 6 Select any additional buttons you want to display on the home screen, and then touch Continue. 7 If Fax is enabled, type in your Fax Station name, and then touch Enter. For more information on fax station name and number, see your system support person; or touch Back to go back and deselect Fax. 8 If Fax is enabled, enter the Fax station (phone) number for this printer, and then touch Continue.
2 From the Network pop-up menu, select print server xxxxxx, where the x’s are the last six digits of the MAC address located on the MAC address sheet. 3 Open the Safari browser. 4 From the Bookmarks drop-down menu, select Show. 5 Under Collections, select Bonjour or Rendezvous, and then double-click the printer name. Note: The application is referred to as Rendezvous in Mac OS X version 10.3, but is now called Bonjour by Apple Computer.
f Select a Destination, and then click Continue. g From the Easy Install screen, click Install. h Type the user password, and then click OK. All necessary software is installed on the computer. i Click Restart when installation is complete. 2 Add the printer: a For IP printing: In Mac OS X version 10.5 or later 1 From the Apple menu, choose System Preferences. 2 Click Print & Fax. 3 Click +. 4 Select the printer from the list. 5 Click Add. In Mac OS X version 10.
Installing the printer on a wired network Use the following instructions to install the printer on a wired network. These instructions apply to Ethernet and fiber optic network connections. Before you install the printer on a wired network, make sure that: • You have completed the initial setup of the printer. • The printer is connected to your network with the appropriate type of cable. For Windows users 1 Insert the Software and Documentation CD. Wait for the Welcome screen to appear.
4 Install the drivers and add the printer. a Install a PPD file on the computer: 1 Insert the Software and Documentation CD in the CD or DVD drive. 2 Double-click the installer package for the printer. 3 From the Welcome screen, click Continue. 4 Click Continue again after viewing the Readme file. 5 Click Continue after viewing the license agreement, and then click Agree to accept the terms of the 6 7 8 9 agreement. Select a Destination, and then click Continue. From the Easy Install screen, click Install.
4 5 6 7 8 9 10 From the Printer List, click Add. Choose the Default Browser tab. Click More Printers. From the first pop-up menu, choose AppleTalk. From the second pop-up menu, select Local AppleTalk zone. Select the printer from the list. Click Add. Note: If the printer does not show up in the list, then you may need to add it using the IP address. Contact your system support person for assistance.
In Windows 2000 a Click Start. b Click Settings Printers. 3 Locate the printer that has changed. Note: If there is more than one copy of the printer, then update all of them with the new IP address. 4 Right-click the printer. 5 Click Properties. 6 Click the Ports tab. 7 Locate the port in the list, and then select it. 8 Click Configure Port. 9 Type the new IP address in the “Printer Name or IP Address” field. You can find the new IP address on the network setup page you printed in step 1.
c d e f Click +. Click AppleTalk. Select the printer from the list. Click Add. In Mac OS X version 10.4 and earlier a b c d e f g h i j From the Go menu, choose Applications. Double-click Utilities. Double-click Print Center or Printer Setup Utility. From the Printer List, click Add. Choose the Default Browser tab. Click More Printers. From the first pop-up menu, choose AppleTalk. From the second pop-up menu, select Local AppleTalk zone. Select the printer from the list. Click Add.
g Select the printer model from the menu, and then click Add Printer. h Click the + beside the printer model under Select Components. i Make sure the correct port is available under Select Components. This is the port where the serial cable attaches to the computer. If the correct port is not available, select the port under the Select Port menu, and then click Add Port. j Make any configuration changes necessary in the Add a New Port window. Click Add Port to finish adding the port.
f Click OK, and then close all the windows. g Print a test page to verify printer installation. When a test page prints successfully, printer setup is complete.
Minimizing your printer's environmental impact Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see: • The Notices chapter • The Environmental Sustainability section of the Lexmark Web site at www.lexmark.com/environment • The Lexmark recycling program at www.lexmark.
Choose scanning You can avoid making a paper output of a document or photograph by scanning it and then saving it to a computer program, application, or flash drive.
4 Touch Eco-Mode. 5 Touch the arrows to select a setting. 6 Touch Submit. Submitting changes appears. Adjusting Power Saver To save energy, you can decrease the number of minutes before the printer enters Power Saver mode. Available settings range from 1–240 minutes. The factory default setting is 30 minutes. Using the Embedded Web Server 1 Type the printer IP address into the address field of your Web browser.
Adjusting the brightness of the display To save energy, or if you are having trouble reading your display, you can adjust the brightness of the display. Available settings range from 20–100 . The factory default setting is 100. Using the Embedded Web Server 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section.
5 From the Power Saver list, select the light setting the standard exit bin will use when in Power Saver mode. Note: For more information on Power Saver mode, see “Adjusting Power Saver” on page 72. 6 Click Submit. Using the printer control panel 1 Make sure the printer is on and Ready appears. 2 On the home screen, touch . 3 Touch Settings, and then touch General Settings. 4 Touch the down arrow until Output Lighting appears. 5 Touch Output Lighting.
Expanded polystyrene (EPS) foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area. For information on EPS foam recycling locations: 1 Visit EPS Recycling International's Web site at www.epsrecycling.org/pages/intcon.html. 2 Select your country or region from the list, and then click the links or use the contact information provided. When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in.
5 Touch the arrows to select a setting. 6 Touch Submit. Submitting changes appears.
Loading paper and specialty media This section explains how to load the trays and feeders. It also includes information about paper orientation, setting the Paper Size and Paper Type, and linking and unlinking trays. Setting the Paper Size and Paper Type The Paper Size setting for the standard 250 tray and the multipurpose feeder must be set manually from the Paper size menu. The factory default Paper Type setting is Plain Paper.
8 Touch Submit to save your selection. Submitting Selection appears, followed by the Paper menu. 9 Touch to return to the home screen. Avoiding jams The following hints can help you avoid jams: Paper tray recommendations • • • • • Make sure the paper lies flat in the paper tray. Do not remove the paper tray while the printer is printing. Do not load the paper tray while the printer is printing. Load it prior to printing, or wait for a prompt to load it. Do not load too much paper.
2 Squeeze and slide the guides to the correct position for the paper size you are loading. For long paper like A4 or legal, squeeze and slide the length guide backwards to accommodate the length of paper you are loading.
If you are loading A6-size paper: a Squeeze and slide the length guide toward the center of the tray to the A5 size position. b Raise the A6 backstop. Notes: • The standard tray accommodates only 150 sheets of A6-size paper. Notice the maximum fill line on the A6 backstop which indicates the maximum height for loading A6-size paper. Do not try to overload the tray. • A6-size paper cannot be loaded in the optional tray. Note: Use the size indicators on the bottom of the tray to help position the guide.
1 1 Maximum fill line Load letterhead with the top edge of the sheet toward the front of the tray and the design facedown. LETTERHEAD 5 Squeeze and slide the guides to lightly touch the side of the stack.
6 Insert the tray. 7 If the paper type you loaded differs from the type that was previously loaded in the tray, then change the Paper Size/Type setting on the Paper menu. Using the multipurpose feeder You may want to use the multipurpose feeder when you print on different sizes and types of papers or specialty media, such as card stock, transparencies, paper labels, and envelopes.
2 Grasp the raised handle, and pull the extension forward. 3 Grasp the handle, and pull the extension so it flips forward. 4 Guide the extension down gently so the multipurpose feeder is extended fully and open.
Loading the multipurpose feeder 1 Squeeze the tab located on the right width guide, and move the guides out fully. 2 Prepare the paper or specialty media for loading. • Flex sheets of paper or paper labels back and forth to loosen them, and then fan them. Do not fold or crease the paper or labels. Straighten the edges on a level surface. • Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface. Note: Avoid touching the print side of the transparencies.
• Flex a stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level surface. Note: Fanning prevents the edges of envelopes from sticking together. It also helps them feed properly to avoid jams. Do not fold or crease envelopes. 3 Load the paper or specialty media. Notes: • Do not force any paper into the multipurpose feeder. Overfilling may cause jams.
• Load letterhead with the logo faceup and the top edge entering the printer first. • Load envelopes with the flap side down and the stamp location in the position shown. The stamp and address are shown to illustrate the proper orientation for loading envelopes. Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-stick adhesives. These envelopes may severely damage the printer.
5 Slide the paper gently into the multipurpose feeder until it comes to a stop. Paper should lie flat in the multipurpose feeder. Make sure the paper fits loosely in the multipurpose feeder and is not bent or wrinkled. 6 From the printer control panel, set the Paper Size and Paper Type. Linking and unlinking trays Linking trays Tray linking is useful for large print jobs or multiple copies. When one linked tray is empty, paper feeds from the next linked tray.
To unlink a tray, change the following tray settings so that they do not match the settings of any other tray: • Paper Type (for example: Plain Paper, Letterhead, Custom Type ) Paper Type names describe the paper characteristics. If the name that best describes your paper is used by linked trays, assign a different Paper Type name to the tray, such as Custom Type , or define your own custom name.
8 Select a Paper Type setting from the list next to your custom name. 9 Click Submit.
Paper and specialty media guidelines Paper guidelines Selecting the correct paper or specialty media reduces printing problems. For the best print quality, try a sample of the paper or specialty media before buying large quantities. Paper characteristics The following paper characteristics affect print quality and reliability. Consider these characteristics when evaluating new paper stock.
For 60–176 g/m2 (16–47 lb bond) paper, grain long paper is recommended. For paper heavier than 176 g/m2, grain short is recommended. Fiber content Most high-quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton can negatively affect paper handling.
Lexmark consistently tests its printers with recycled paper (20–100% post-consumer waste) and a variety of test paper from around the world, using chamber tests for different temperature and humidity conditions. Lexmark has found no reason to discourage the use of today's recycled office papers, but generally the following property guidelines apply to recycled paper.
Supported paper sizes, types, and weights The following tables provide information on standard and optional paper sources and the types of paper they support. Note: For an unlisted paper size, configure a Universal Paper Size. For information on card stock and labels, see the Card Stock & Label Guide on the Lexmark Web site at www.lexmark.com/publications. Paper sizes supported by the printer Paper size Dimensions A4 210 x 297 mm (8.3 x 11.7 in.) A5 148 x 210 mm (5.8 x 8.3 in.) A61 105 x 148 mm (4.
Paper size Dimensions Standard 250-sheet tray Optional 250or 550-sheet tray 10 Envelope 105 x 241 mm (4.1 x 9.5 in.) X X X DL Envelope 110 x 220 mm (4.3 x 8.7 in.) X X X C5 Envelope 162 x 229 mm (6.4 x 9 in.) X X X B5 Envelope 176 x 250 mm (6.9 x 9.8 in.) X X X Other Envelope 229 x 356 mm (9 x 14 in.) X X X 1 Multipurpose feeder Duplex path A6 is supported only for grain long papers. 2 If a paper size you want to use is not listed, configure a Universal paper size.
Paper type Standard 250-sheet tray Optional 250- or Multipurpose 550-sheet tray feeder Manual feeder Paper labels1 Duplex path X Transparencies Envelopes (smooth)2 X X X 1 Single-sided paper labels designed for laser printers are supported for occasional use. It is recommended to print no more than 20 pages of paper labels a month. Vinyl, pharmacy, and dual-sided labels are not supported. 2 Use envelopes that lie flat when individually placed on a table facedown.
Printing Printing a document 1 Load paper into a tray or feeder. 2 From the printer control panel Paper menu, set the Paper Type and Paper Size to match the loaded paper. 3 Do one of the following: For Windows users a With a document open, click File Print. b Click Properties, Preferences, Options, or Setup, and then adjust the settings as needed. Note: To print on a specific size or type of paper, adjust the paper size or type settings to match the loaded paper, or select the appropriate tray or feeder.
6 Touch Submit. Submitting changes appears. 7 Touch to return to the home screen. Printing on specialty media Tips on using letterhead • • • • Use letterhead designed specifically for laser printers. Print samples on the letterhead being considered for use before buying large quantities. Before loading letterhead, fan the stack to prevent sheets from sticking together. Page orientation is important when printing on letterhead.
• To optimize performance and minimize jams, do not use envelopes that: – Have excessive curl or twist – Are stuck together or damaged in any way – Have windows, holes, perforations, cutouts, or embossing – Have metal clasps, string ties, or folding bars – Have an interlocking design – Have postage stamps attached – Have any exposed adhesive when the flap is in the sealed or closed position – Have bent corners – Have rough, cockle, or laid finishes • Adjust the width guides to fit the width of the envelopes
When printing on card stock: • Make sure the Paper Type is Card Stock. • Select the appropriate Paper Texture setting. • Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper handling problems. • Check with the manufacturer or vendor to ensure the card stock can withstand temperatures up to 210°C (410°F) without releasing hazardous emissions.
Printing confidential and other held jobs from Windows Note: Confidential and Verify print jobs are automatically deleted from memory after they print. Repeat and Reserve jobs continue to be held in the printer until you choose to delete them. 1 With a document open, click File Print. 2 Click Properties, Preferences, Options, or Setup. 3 Click Other Options, and then click Print and Hold. 4 Select your job type (Confidential, Reserve, Repeat, or Verify), and then assign a user name.
9 Touch the job you want to print. 10 Touch Print, or touch the arrows to increase or decrease the number of copies, and then touch Print. Printing from a flash drive A USB port is located on the printer control panel. Insert a flash drive to print supported file types. Supported file types include: .pdf, .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, and .dcx.
Notes: • If you insert the flash drive when the printer requires attention, such as when a jam has occurred, then the printer ignores the flash drive. • If you insert the flash drive while the printer is printing other jobs, then Printer Busy appears. When the current job is completed, touch the USB icon to print documents from the flash drive. 3 Touch the document you want to print. Note: Folders found on the flash drive appear as folders. File names are appended by the extension type (for example, .
Printing the print quality test pages Print the print quality test pages to isolate print quality problems. 1 Turn the printer off. 2 Hold down 2 ABC and 6 MNO while turning the printer on. 3 Release the buttons when the screen with the progress bar appears. The printer performs a power-on sequence, and then the Configuration menu appears. 4 Touch the down arrow until Print Quality Pages appears. 5 Touch Print Quality Pages. The print quality test pages print. 6 Touch Back.
3 Select the job to cancel. 4 From the keyboard, press Delete. From the Windows taskbar: When you send a job to print, a small printer icon appears in the right corner of the taskbar. 1 Double-click the printer icon. A list of print jobs appears in the printer window. 2 Select a job to cancel. 3 From the keyboard, press Delete. For Macintosh users In Mac OS X version 10.5 or later: 1 From the Apple menu, choose System Preferences. 2 Click Print & Fax, and then double-click the printer icon.
Copying ADF Scanner glass Use the ADF for multiple-page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). Making copies Making a quick copy 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF.
Copying using the scanner glass 1 Place an original document facedown on the scanner glass in the upper left corner. 2 On the home screen, touch Copy, or use the keypad to enter the number of copies. The copy screen appears. 3 Change the copy settings as needed. 4 Touch Copy It. 5 If you have more pages to scan, then place the next document on the scanner glass, and then touch Scan the Next Page. 6 Touch Finish the Job to return to the home screen.
Copying to letterhead 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 2 If you are loading a document into the ADF, then adjust the paper guides. 3 On the home screen, touch Copy. 4 Touch Copy from, and then identify the size of the original document.
4 Touch Copy from, and then identify the size of the original document. 5 Touch Copy to, and then touch the tray or feeder that contains the paper type you want. Note: If you choose Manual Feeder, then you will also need to select the paper size and type. 6 Touch Copy It. Copying on both sides of the paper (duplexing) 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
4 From the Content area, touch the arrows to best represent what you are copying: • Text—Used for original documents that are mostly text or line art • Text/Photo—Used when the original documents are a mixture of text and graphics or pictures • Photograph—Used when the original document is a high-quality photograph or inkjet print • Printed Image—Used when copying halftone photographs, graphics such as documents printed on a laser printer, or pages from a magazine or newspaper that are composed primarily of
6 Select one of the following: • Between Copies • Between Jobs • Between Pages 7 Touch Done. 8 Touch Copy It. Copying multiple pages onto a single sheet In order to save paper, you can copy either two or four consecutive pages of a multiple-page document onto a single sheet of paper. Notes: • The Paper Size must be set to Letter, Legal, A4, or B5 JIS. • The Copy Size must be set to 100%. 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 2 If you are loading a document into the ADF, then adjust the paper guides. 3 On the home screen, touch Copy. 4 Touch Options. 5 Touch Custom Job. 6 Touch On. 7 Touch Done. 8 Touch Copy It.
3 On the home screen, touch Copy. 4 Touch Options. 5 Touch Header/Footer. 6 Pick an area of the page to place the date and time. 7 Touch Date/Time, and then touch Continue. 8 Touch Done. 9 Touch Copy It. Placing an overlay message on each page An overlay message can be placed on each page. The message choices are Urgent, Confidential, Copy, or Draft. To place a message on the copies: 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
3 Touch Delete Selected Jobs. The remainder of the copy job is canceled. The home screen appears. Understanding the copy screens and options Copy from This option opens a screen where you can enter the size of the documents you are going to copy. Touch a paper size button to select it as the “Copy from” setting. The copy screen appears with your new setting displayed. Copy to This option opens a screen where you can enter the size and type of paper on which your copies will be printed.
Sides (Duplex) Use this option to select duplex settings. You can print copies on one or two sides, make two-sided copies (duplex) of two-sided original documents, make two-sided copies from one-sided original documents, or make one-sided copies (simplex) from two-sided original documents. Collate This option keeps the pages of a print job stacked in sequence when printing multiple copies of the document.
Edge Erase This option eliminates smudges or information around the edges of your document. You can choose to eliminate an equal area around all four sides of the paper, or pick a particular edge. Edge Erase erases whatever is within the selected area, leaving nothing printed on that portion of the paper. Header/Footer This option turns on the Date/Time, Page number, Bates number, or Custom text and prints them in the specified header or footer location.
E-mailing ADF Scanner glass Use the ADF for multiple-page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). Getting ready to e-mail Enabling the e-mail function The e-mail function must be enabled prior to use.
14 Type in the Primary SMTP Gateway address, and then touch Enter. 15 If prompted, set the date and time, and then touch Continue. When the home screen appears, the e-mail function is enabled. Setting up the e-mail function For e-mail to operate, it must be turned on in the printer configuration and have a valid IP address or gateway address. To set up the e-mail function: 1 Type the printer IP address into the address field of your Web browser.
5 Type a unique name for the recipient, and then enter the e-mail address. Note: If you are entering multiple addresses, then separate each address with a comma (,). 6 Select the scan settings (Format, Content, Color, and Resolution). 7 Enter a shortcut number, and then click Add. If you enter a number that is already in use, then you are prompted to select another number. Creating an e-mail shortcut using the touch screen 1 On the home screen, touch E-mail. 2 Type the recipient's e-mail address.
3 Press # , and then enter the shortcut number using the keypad. To enter additional recipients, press Next address, and then enter the address or shortcut number you want to add. 4 Touch E-mail It. Sending an e-mail using the address book 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF.
Changing the output file type 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 2 If you are loading a document into the ADF, then adjust the paper guides. 3 On the home screen, touch E-mail. 4 Type an e-mail address. 5 Touch Options.
Orientation This option tells the printer whether the original document is in portrait or landscape orientation and then changes the Sides and Binding settings to match the original document orientation. Binding Tells the printer whether the original document is bound on the long-edge or short-edge side. E-mail Subject This option lets you enter a subject line for your e-mail. You can enter up to 255 characters. E-mail File Name This option lets you customize the attachment file name.
• Photograph—Tells the scanner to pay extra attention to graphics and pictures. This setting increases the time it takes to scan, but emphasizes a reproduction of the full dynamic range of tones in the original document. This increases the amount of information saved. • Color—Sets the scan type and output for the e-mail. Color documents can be scanned and sent to an e-mail address.
Faxing Note: Fax capabilities may not be available on all printer models. ADF Scanner glass Use the ADF for multiple-page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). Getting the printer ready to fax Note: Fax capabilities may not be available on all printer models. The following connection methods may not be applicable in all countries or regions.
Notes: • The printer is an analog device that works best when directly connected to the wall outlet. Other devices (such as a telephone or answering machine) can be successfully attached to pass through the printer, as described in the setup steps. • If you want a digital connection such as ISDN, DSL, or ADSL, a third-party device (such as a DSL filter) is required. Contact your DSL provider for a DSL filter.
Connecting to a DSL service If you subscribe to a DSL service, then contact the DSL provider to obtain a DSL filter and telephone cord, and then follow these steps to connect the equipment: 1 Connect one end of the telephone cable that came with the printer to the printer LINE port . 2 Connect the other end of the telephone cable to the DSL filter. Note: Your DSL filter may look different than the one in the illustration. 3 Connect the DSL filter cable to an active telephone wall jack.
Connecting to a distinctive ring service A distinctive ring service may be available from your telephone service provider. This service allows you to have multiple telephone numbers on one telephone line with each telephone number having a different ring pattern. This may be useful for distinguishing between fax and voice calls.
3 Remove the plug from the printer EXT port . 4 Connect your telecommunications equipment directly to the printer EXT port Use one of the following methods: Answering machine Answering machine and telephone Faxing 127 .
Telephone or a telephone with an integrated answering machine Connecting to an adapter for your country or region The following countries or regions may require a special adapter to connect the telephone cable to the active telephone wall jack: Country/region • • • • • • • • Austria Cyprus Denmark Finland France Germany Ireland • • • • • • • New Zealand Netherlands Norway Portugal Sweden Switzerland United Kingdom Italy Countries or regions except Austria, Germany, and Switzerland For some countries
3 Connect the answering machine or telephone to the adapter.
Austria, Germany, and Switzerland There is a special RJ-11 plug installed in the printer EXT port operation of the fax function and connected telephones. . Do not remove this plug. It is necessary for the proper Connecting to a telephone wall jack in Germany Note: There is a special RJ-11 plug installed in the printer EXT port . Do not remove this plug. It is necessary for the proper operation of the fax function and connected telephones.
3 Connect the adapter into the N slot of an active analog telephone wall jack. 4 If you would like to use the same line for both fax and telephone communication, then connect a second telephone line (not provided) between the telephone and the F slot of an active analog telephone wall jack.
Connecting to a computer with a modem Connect the printer to a computer with a modem to send faxes from the software program. Note: Setup steps may vary depending on your country or region. 1 Connect one end of the telephone cable that came with the printer to the printer LINE port . 2 Connect the other end of the telephone cable to an active analog telephone wall jack. 3 Remove the protective plug from the printer EXT port . 4 Connect your telephone to the computer telephone jack.
5 Connect an additional telephone cord (not provided) from the computer modem to the printer EXT port . Enabling the fax function The fax function must be enabled prior to use. If you disabled the fax function when setting up the printer for the first time or if the printer has been off for an extended time, then follow these steps: Note: Before completing these instructions, make sure the fax cables are connected. For more information, see “Choosing a fax connection” on page 123. 1 Touch Menus.
Using the Embedded Web Server for fax setup 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the address in the TCP/IP section. 2 Click Settings. 3 Click Fax Settings. 4 Click Analog Fax Setup. 5 Click inside the Station Name box, and then enter the name to be printed on all outgoing faxes. 6 Click inside the Station Number box, and then enter the printer fax number. 7 Click Submit.
Sending a fax Sending a fax using the printer control panel 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 2 If you are loading a document into the ADF, then adjust the paper guides. 3 On the home screen, touch Fax.
Creating shortcuts Creating a fax destination shortcut using the Embedded Web Server Instead of entering the entire phone number of a fax recipient on the printer control panel each time you want to send a fax, you can create a permanent fax destination and assign a shortcut number. A shortcut can be created to a single fax number or a group of fax numbers. 1 Type the printer IP address into the address field of your Web browser.
Using shortcuts and the address book Using fax shortcuts Fax shortcuts are just like the speed dial numbers on a telephone or fax machine. You can assign shortcut numbers when creating permanent fax destinations. Permanent fax destinations or speed dial numbers are created in the Manage Shortcuts link located under Settings on the Embedded Web Server. A shortcut number (1–99999) can contain a single recipient or multiple recipients.
Customizing fax settings Changing the fax resolution Adjusting the resolution setting changes the quality of the fax. Settings range from Standard (fastest speed) to Ultra Fine (slowest speed, best quality). 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.
7 Touch Delayed Send. Note: If Fax Mode is set to Fax Server, the Delayed Send button will not appear. Faxes waiting for transmission are listed in the Fax Queue. 8 Touch the arrows to adjust the time the fax will be transmitted. The time is increased or decreased in increments of 30 minutes. If the current time is shown, the left arrow is unavailable. 9 Touch Done. 10 Touch Fax it. Note: The document is scanned and then faxed at the scheduled time.
5 Click the Block No Name Fax option. This option blocks all incoming faxes that have a private caller ID or no fax station name. 6 In the Banned Fax List field, enter the phone numbers or fax station names of specific fax callers you want to block. Canceling an outgoing fax Canceling a fax while the original documents are still scanning • When using the ADF, touch Cancel Job while Scanning… appears.
Sides (Duplex) This option informs the printer if the original document is simplex (printed on one side) or duplex (printed on both sides). This lets the scanner know what needs to be scanned for inclusion in the fax. Resolution This options increases how closely the scanner examines the document you want to fax. If you are faxing a photo, a drawing with fine lines, or a document with very small text, increase the Resolution setting.
Improving fax quality Question When should I use Text mode? Tip • Use Text mode when text preservation is the main goal of the fax, and preserving images copied from the original document is not a concern. • Text mode is recommended for faxing receipts, carbon copy forms, and documents that contain only text or fine line art. When should I use Text/Photo mode? • Use Text/Photo mode when faxing an original document that contains a mixture of text and graphics.
Forwarding a fax This option lets you print and forward received faxes to a fax number, e-mail address, FTP site, or LDSS. 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. 2 Click Settings. 3 Click Fax Settings. 4 Click Analog Fax Setup.
Scanning to an FTP address ADF Scanner glass Use the ADF for multiple-page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). The scanner lets you scan documents directly to a File Transfer Protocol (FTP) server. Only one FTP address may be sent to the server at a time.
3 Press #, and then enter the FTP shortcut number. 4 Touch Send It. Scanning to an FTP address using the address book 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 2 If you are loading a document into the ADF, then adjust the paper guides. 3 On the home screen, touch FTP.
3 Touch Save as Shortcut. 4 Enter a name for the shortcut. 5 Verify that the shortcut name and number are correct, and then touch OK. If the name or number is incorrect, then touch Cancel, and then reenter the information. If you enter a number that is already in use, then you are prompted to select another number. 6 Touch Send It to start the scan, or touch to return to the home screen.
• JPEG—Creates and attaches a separate file for each page of your original document, viewable by most Web browsers and graphics programs • XPS—Creates a single XPS file with multiple pages, viewable using an Internet Explorer-hosted viewer and the .NET Framework, or by downloading a third party standalone viewer Content This option tells the printer the original document type. Choose from Text, Text/Photo, or Photo. Color can be turned on or off with any of the Content choices.
Improving FTP quality Question When should I use Text mode? Tip • Use Text mode when text preservation is the main goal of sending a document to an FTP site, and preserving images copied from the original document is not a concern. • Text mode is recommended for receipts, carbon copy forms, and documents that only contain text or fine line art. When should I use Text/Photo mode? • Use Text/Photo mode when sending a document to an FTP site that contains a mixture of text and graphics.
Scanning to a computer or flash drive ADF Scanner glass Use the ADF for multiple-page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). Scanning to a computer 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. 2 Click Scan Profile.
# , and then enter the shortcut number using the keypad, or touch Held Jobs on the home screen, and then touch Profiles. c Press d After you enter the shortcut number, the scanner scans and sends the document to the directory or program you specified. If you touched Profiles on the home screen, then locate your shortcut on the list. 9 Return to the computer to view the file. The output file is saved in the location you specified or launched in the program you specified.
Photo—Tells the scanner to pay extra attention to graphics and pictures. This setting increases the time it takes to scan, but emphasizes a reproduction of the full dynamic range of tones in the original document. This increases the amount of information saved. Color This option tells the printer the color of the original documents. You can select Gray, BW (Black and White), or Color. Original Size This option sets the size of the documents you are going to scan.
• Scan edge to edge—Select this check box to scan edge to edge. • Mirror Image—Select this check box to create a mirror image scan. • Negative Image—Select this check box to create a negative image scan. Scanning to a flash drive 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.
Understanding printer menus Menus list A number of menus are available to make it easy for you to change printer settings. To access the menus, on the home screen.
Paper menu Default Source menu Menu item Description Default Source Tray MP Feeder Envelope Feeder Manual Paper Manual Env Sets a default paper source for all print jobs Notes: • Tray 1 (standard tray) is the factory default setting. • Only an installed paper source will appear as a menu setting. • A paper source selected by a print job will override the Default Source setting for the duration of the print job.
Menu item Description Tray Type Plain Paper Card Stock Transparency Specifies the type of paper loaded in each tray Glossy Heavy Glossy Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough Paper Recycled Custom Type Multipurpose Tray Size A4 A5 A6 Executive Oficio (México) Folio JIS B5 Legal Letter Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope Notes: • Plain Paper is the factory default setting for Tray 1.
Menu item Description Multipurpose Tray Type Plain Paper Card Stock Transparency Specifies the type of paper loaded in the multipurpose tray Glossy Heavy Glossy Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough Paper Recycled Custom Type Notes: • From the Paper menu, Configure Multipurpose Tray must be set to Cassette for Multipurpose Tray to appear as a menu setting. • Plain paper is the factory default setting.
Menu item Description Manual Envelope Size 7 3/4 Envelope 9 Envelope 10 Envelope C5 Envelope B5 Envelope DL Envelope Other Envelope Specifies the size of the envelope being manually loaded Manual Envelope Type Envelope Rough Envelope Custom Type Specifies the type of envelope being manually loaded Note: 10 Envelope is the US factory default setting. DL Envelope is the international factory default setting. Note: Envelope is the factory default setting.
Paper Texture menu In the Paper Texture menu, the Select Type and Select Texture features work together to enable you to select the texture for a specific type of paper.
Paper Weight menu In the Paper Weight menu, the Select Type and Select Weight features work together to enable you to select the weight for a specific type of paper.
Menu item Description Recycled Loading Duplex Off Determines whether 2-sided printing occurs for all jobs that specify Recycled as the paper type Labels Loading Duplex Off Determines whether 2-sided printing occurs for all jobs that specify Labels as the paper type Note: Off is the factory default setting. Notes: • Off is the factory default setting. • Single-sided paper labels designed for laser printers are supported for occasional use: no more than 20 pages a month.
Custom Types menu Menu item Description Custom Type Paper Card Stock Transparency Labels Envelope Rough/Cotton Associates a paper or specialty media type with a factory default Custom Type name or a user-defined Custom Name created from the Embedded Web Server or MarkVisionTM Professional. This user-defined name displays instead of Custom Type . Notes: • Paper is the factory default setting for the Custom Type.
Menu item Description Custom Scan Size Scan Size Name Width 1–14 inches (25–355.6 mm) Height 1–14 inches (25–355.6 mm) Orientation Landscape Portrait 2 scans per side Off On Specifies a custom scan size name and options. This name replaces a Custom Scan Size name in the printer menus. Notes: • 8.5 inches is the US factory default setting for Width. 216 millimeters is the international factory default setting for Width. • 14 inches is the US factory default setting for Height.
Menu item Description Feed Direction Short Edge Long Edge Specifies the feed direction if the paper can be loaded in either direction Notes: • Short Edge is the factory default setting. • Long Edge appears only if the longest edge is shorter than the maximum width supported in the tray. Reports menu Note: When you select a menu item from the Reports menu, the indicated report prints.
Menu item Description Print Fonts Prints a report of all the fonts available for the printer language currently set in the printer Print Directory Prints a list of all the resources stored on an optional flash memory card or printer hard disk Notes: • Job Buffer Size must be set to 100%. • The optional flash memory or printer hard disk must be installed correctly and working properly. Asset Report Prints a report containing asset information including the printer serial number and model name.
Menu item Description PS SmartSwitch On Off Sets the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language Notes: • On is the factory default setting. • When the Off setting is used, the printer does not examine incoming data. • When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.
Menu item Description Std Network Setup Reports or Network Reports Network Card TCP/IP IPv6 AppleTalk NetWare LexLink For descriptions and settings of the network setup menus, see the following: Net Setup Reports or Network Reports Network Card TCP/IP IPv6 Wireless AppleTalk NetWare LexLink • • • • • • • • “Network Reports menu” on page 167 “Network Card menu” on page 167 “TCP/IP menu” on page 168 “IPv6 menu” on page 169 “Wireless menu” on page 169 “AppleTalk menu” on page 170 “NetWare menu” on pa
Menu item Description Device-Initiated E-mail None Use Device SMTP Credentials Specifies server information Notes: User-Initiated E-mail None Use Device SMTP Credentials Use Session User ID and Password Use Session E-mail address and Password Prompt User • The message boxes have a limitation of 512 characters. • None is the factory default setting for Device-Initiated E-mail and User-Initiated E-mail.
Menu item Description Job Timeout 0-225 seconds Sets the amount of time in seconds that a network print job can take before it is canceled Notes: • 90 seconds is the factory default setting. • A setting value of 0 disables the timeout. • If a value of 1–9 is selected, then the setting is saved as 10. Banner Page Off On Allows the printer to print a banner page Note: Off is the factory default setting. TCP/IP menu Use the following menu items to view or set the TCP/IP information.
Menu item Description AutoIP Yes No Specifies the Zero Configuration Networking setting Enable FTP/TFTP Yes No Enables the built-in FTP server, which allows you to send files to the printer using the File Transfer Protocol. Enable HTTP Server Yes No Enables the built-in Web server (Embedded Web Server). When this is enabled, the printer can be monitored and managed remotely using a Web browser.
This menu is available from the Network/Ports menu: Network/Ports Network Net Setup Wireless Menu item Description Network Mode Infrastructure Ad hoc Specifies the network mode Notes: • Infrastructure mode lets the printer access a network using an access point. • Ad hoc is the factory default setting. Ad hoc mode configures the printer for wireless networking directly between it and a computer. Compatibility 802.11n 802.11b/g 802.
Menu item Description View Login Name Lets you view the assigned NetWare login name Note: This can be changed only from the Embedded Web Server. Print Mode Lets you view the assigned NetWare print mode Note: This can be changed only from the Embedded Web Server. Network Number Lets you view the assigned NetWare network number Note: This can be changed only from the Embedded Web Server. Select IPX Frame Types Ethernet 802.2 Ethernet 802.
Standard USB menu Menu item Description PCL SmartSwitch On Off Sets the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language Notes: • On is the factory default setting. • When the Off setting is used, the printer does not examine incoming data. • When the Off setting is used, the printer uses PostScript emulation if the PS SmartSwitch setting is On.
Menu item Description Job Buffering Off On Auto Temporarily stores jobs on the printer hard disk before printing Notes: • Off is the factory default setting. • The On setting buffers jobs on the printer hard disk. • The Auto setting buffers print jobs only if the printer is busy processing data from another input port. • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.
Menu item Description NPA Mode On Off Auto Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol Notes: • Auto is the factory default setting. • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.
Menu item Description Honor Init On Off Determines whether or not the printer honors printer hardware initialization requests from the computer Notes: • Off is the factory default setting. • The computer requests initialization by activating the Init signal from the parallel port. Many personal computers activate the Init signal each time the computer is turned on.
Menu item Description PS SmartSwitch On Off Sets the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language Notes: • On is the factory default setting. • When the Off setting is used, the printer does not examine incoming data. • When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch is set to On.
Menu item Description Serial Protocol DTR DTR/DSR XON/XOFF XON/XOFF/DTR XON/XOFF/DTRDSR Selects the hardware and software handshaking settings for the serial port Robust XON On Off Notes: • • • • DTR is the factory default setting. DTR/DSR is a hardware handshaking setting. XON/XOFF is a software handshaking setting. XON/XOFF/DTR and XON/XOFF/DTR/DSR are combined hardware and software handshaking settings.
Security menu Miscellaneous menu Menu item Description Panel Logins Login failures Failure time frame Lockout time Login timeout Limits the number and time frames of failed login attempts from the printer control panel before all users are locked out Notes: • “Login failures” specifies the number of failed login attempts before users are locked out. Settings range from 1–50. 3 attempts is the factory default setting.
Menu item Description Job Expiration Off 1 hour 4 hours 24 hours 1 week Limits the amount of time a confidential job stays in the printer before it is deleted Notes: • Off is the default setting. • If the Job Expiration setting is changed while confidential jobs reside on the printer RAM or printer hard disk, the expiration time for those print jobs does not change to the new default value. • If the printer is turned off, all confidential jobs held in printer RAM are deleted.
Menu item Description Automatic Method Single pass Multiple pass Disk Wiping erases only print job data that is not currently in use by the file system from the printer hard disk. All permanent data on the printer hard disk is preserved, such as downloaded fonts, macros, and held jobs. Notes: • This menu item appears only if a formatted, non-defective printer hard disk is installed. • Single pass is the default setting.
Menu item Description Delete Log Delete now Do not delete Specifies whether audit logs are deleted Configure Log Enable Audit Enable Remote Syslog Remote Syslog Facility Severity of events to log Specifies whether and how the audit logs are created Note: Delete Now is the factory default setting. Note: Factory default settings enable the security audit log.
Settings menu General Settings menu Menu item Description Display Language English Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Turkce Korean Sets the language of the text appearing on the display Eco-Mode Off Energy Energy/Paper Paper Minimizes the use of energy, paper, or specialty media Note: All languages may not be available for all printers. Notes: • Off is the factory default setting. Off resets the printer to its factory default settings.
Menu item Description Run Initial setup Yes No Instructs the printer to run the setup wizard Notes: • Yes is the factory default setting. • After completing the setup wizard by selecting Done at the Country select screen, the default becomes No.
Menu item Description Displayed Information Left side Right side Custom Text Cartridge levels on status screen On Off Black Toner When to Display Display Do not display Message to Display Default Alternate Default Message Alternate Message Specifies what is displayed on the upper left and right corners of the home screen For the Left side and Right side options, choose from the following options: Model Name None IP Address Hostname Contact Name Location Date/Tim
Menu item Description Home screen customization Change Language Copy Copy Shortcuts Fax Fax Shortcuts E-mail E-mail Shortcuts FTP FTP Shortcuts Search Held Jobs Held Jobs USB Drive Profiles Bookmarks Jobs by user Additional buttons can be added to the Home screen, and default buttons can be removed. Date Format MM-DD-YYYY DD-MM-YYYY YYYY-MM-DD Formats the printer date Time Format 12 hour A.M./P.M.
Menu item Description Allow Background Removal On Off Specifies whether image background removal is allowed during copy, fax, e-mail, FTP, or scan to USB Allow Custom Job Scans On Off Lets you scan multiple jobs to one file Note: On is the factory default setting. The background of the image will be removed. Notes: • A printer hard disk must be installed in the printer and operating properly for this menu item to be available. • On is the factory default setting.
Menu item Description Timeouts Power Saver Mode Disabled 2–240 Specifies the number of minutes of inactivity before some systems begin entering a minimum power state.
Menu item Description Print Recovery Jam Recovery On Off Auto Specifies whether the printer reprints jammed pages Notes: • Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks. • On sets the printer to always reprint jammed pages. • Off sets the printer to never reprint jammed pages.
Menu item Description Sides (Duplex) 1 sided to 1 sided 1 sided to 2 sided 2 sided to 1 sided 2 sided to 2 sided Specifies whether an original document is duplex (two-sided) or simplex (onesided), and then specifies whether the copy should be duplex or simplex Notes: • 1 sided to 1 sided—The original page has printing on one side. The copied page will have printing on one side. • 1 sided to 2 sided—The original page has printing on one side. The copied page will have printing on both sides.
Menu item Description Copy To Source Tray Manual Feeder Auto Size Match Specifies the paper source for copy jobs Transparency Separators On Off Places a sheet of paper between transparencies Separator Sheets None Between Copies Between Jobs Between Pages Places a sheet of paper between pages, copies, or jobs based on the value selected Separator Sheet Source Tray Manual Feeder Specifies a paper source Darkness 1–9 Specifies the level of darkness for the copy job Number of Copies Specifi
Menu item Description Header/Footer Top middle Top middle Off Date/Time Page number Bates number Custom text Print on All pages First page only All but first page Enter custom text Specifies header/footer information for the middle of the page Header/Footer Top right Top right Off Date/Time Page number Bates number Custom text Print on All pages First page only All but first page Enter custom text Specifies header/footer information for the top right of the page Header/Footer Bottom left Bottom left O
Menu item Description Header/Footer Bottom middle Bottom middle Off Date/Time Page number Bates number Custom text Print on All pages First page only All but first page Enter custom text Specifies header/footer information for the bottom middle of the page Header/Footer Bottom right Bottom right Off Date/Time Page number Bates number Custom text Print on All pages First page only All but first page Enter custom text Specifies header/footer information for the bottom right of the page Overlay Off Confi
Menu item Description Allow Save as Shortcut On Off Lets you save custom copy settings as shortcuts Background Removal -4 to +4 Adjusts the amount of background visible on a copy Auto Center On Off Lets you automatically center the copy on the page Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specifies which color to drop during copies, and how much to increase or decrease the dropout Contrast 0–5 Best for co
Menu item Description Sample Copy On Off Creates a sample copy of the original document Notes: • Off is the factory default setting. • A printer hard disk must be installed in the printer and operating properly for this menu item to be available. • This menu item appears only for collated copy sets. Fax Settings menu Fax Mode (Analog Fax Setup) menu Analog Fax Setup mode sends the fax job by way of a telephone line.
Menu item Description Caller ID FSK DTMF Specifies the type of caller ID being used Notes: • FSK is the factory default setting. • This option appears only when the selected country/region supports multiple caller ID patterns.
Fax Send Settings Menu item Description Resolution Standard Fine Super Fine Ultra Fine Specifies quality in dots per inch (dpi). A higher resolution gives greater print quality, but it increases the fax transmission time for outgoing faxes. Original Size Letter Legal Executive Folio Statement Oficio (Mexico) Universal Mixed Sizes A4 A5 A6 JIS B5 ID Card Custom Scan Size Book Original Business Card 4 x 6 in. 3 x 5 in.
Menu item Description Dialing Prefix Rules Prefix Rule Establishes a dialing prefix rule Automatic Redial 0–9 Specifies the number of times the printer tries to send the fax to a specified number Redial Frequency 1–200 Specifies the number of minutes between redials Behind a PABX Yes No Enables switchboard blind dialing without a dial tone Enable ECM Yes No Enables Error Correction Mode for fax jobs Enable Fax Scans On Off Lets you send faxes by scanning at the printer Driver to fax Yes No
Menu item Description Background Removal -4 to +4 Adjusts the amount of background visible on a copy Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specifies which color to drop during faxing, and how much to increase or decrease the dropout Contrast Best for content 0–5 Specifies the contrast of the output Mirror Image On Off Creates a mirror image of the original document Negative Image On Off Creates a nega
Fax Receive Settings Menu item Description Enable Fax Receive On Off Allows fax jobs to be received by the printer Fax Job Waiting None Toner Toner and Supplies Allows a fax to be held until toner or supplies are replaced Rings to Answer 1–25 Specifies the number of rings before answering an incoming fax job Auto Reduction On Off Scales an incoming fax job so it fits the size of the paper loaded in the designated fax source Paper Source Auto Tray Multi-Purpose Feeder Specifies the paper sourc
Menu item Description Forward to Fax E-mail FTP LDSS eSF Specifies the type of recipient to which faxes will be forwarded Forward to Shortcut Lets you enter the shortcut number which matches the recipient type (Fax, E-mail, FPT, LDSS, or eSF) Block No Name Fax On Off Enables blocking of incoming faxes sent from devices with no station ID specified Banned Fax List Enables the list of banned fax numbers stored in the printer Holding Faxes Held Fax Mode Off Always On Manual Scheduled Fax Holding Sche
Menu item Description Logs Display Remote Station Name Dialed Number Specifies whether printed logs display the dialed number or the station name returned Enable Job Log On Off Enables access to the Fax Job log Enable Call Log On Off Enables access to the Fax Call log Note: Remote Station Name is the factory default setting. Note: On is the factory default setting. Note: On is the factory default setting.
Fax Server Setup Menu item Description To Format Lets you enter the information using the virtual keyboard on the printer touch screen Reply Address Subject Message Primary SMTP Gateway Specifies SMTP server port information Note: 25 is the default SMTP gateway port. Secondary SMTP Gateway Specifies SMTP server port information Note: 25 is the default SMTP gateway port. Image Format PDF (.pdf) XPS (.xps) TIFF (.
Menu item Description Original Size Letter Legal Executive Folio Statement Specifies the paper size of the document that is being scanned Note: Letter is the US factory default setting. A4 is the international factory default setting. Oficio (Mexico) Universal Mixed Sizes A4 A5 A6 JIS B5 ID Card Custom Scan Size Book Original Business Card 4 x 6 in. 3 x 5 in. Use Multi-Page TIFF On Off Provides a choice between single-page TIFF files and multiple-page TIFF files.
Menu item Description E-mail Server Setup Max e-mail size 0–65535 KB Specifies the maximum e-mail size in kilobytes E-mail Server Setup Size Error Message Sends a message when an e-mail is greater than the configured size limit E-mail Server Setup Limit destinations Sends an e-mail only when the address contains the domain name, such as a company domain name Note: E-mail above the specified size is not sent. Note: E-mail can be sent only to the specified domain.
Menu item Description Darkness 1–9 Lightens or darkens the output Orientation Portrait Landscape Specifies the orientation of the scanned image Original Size Letter Legal Executive Folio Statement Oficio (Mexico) Universal Mixed Sizes A4 A5 A6 JIS B5 ID Card Custom Scan Size Book Original Business Card 3 x 5 in. 4 x 6 in.
Menu item Description Text/Photo Default 5–90 Sets the quality of a text/photo image in relation to file size and the quality of the image Note: 75 is the factory default setting. Photo Default 5–90 Sets the quality of a photo image in relation to file size and the quality of the image E-mail images sent as Attachment Web Link Specifies how the images will be sent Use Multi-Page TIFF On Off Provides a choice between single-page TIFF files and multiple-page TIFF files.
Menu item Description Allow Save as Shortcut On Off Lets you save e-mail addresses as shortcuts Notes: • On is the factory default setting. • When set to Off, the Save as Shortcut button does not appear on the E-mail Destination screen.
FTP Settings menu Menu item Description Format PDF (.pdf) Secure PDF TIFF (.tif) JPEG (.jpg) XPS (.xps) Specifies the format of the FTP file PDF Version 1.2–1.6 Sets the version level of the PDF file for FTP Content Text/Photo Photograph Text Specifies the type of content that will be scanned to FTP Note: PDF (.pdf) is the factory default setting. Note: 1.5 is the factory default setting. Notes: • Text/Photo is the factory default setting.
Menu item Description Original Size Letter Legal Executive Folio Statement Oficio (Mexico) Universal Mixed Sizes A4 A5 A6 JIS B5 ID Card Custom Scan Size Book Original Business Card 3 x 5 in. 4 x 6 in. Specifies the paper size of the document that is being scanned Sides (Duplex) Off Long edge Short edge Specifies how the text and graphics are oriented on the page Note: Letter is the US factory default setting. A4 is the international factory default setting.
Menu item Description Use Multi-Page TIFF On Off Provides a choice between single-page TIFF files and multiple-page TIFF files. For a multiple-page scan to FTP job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job. Notes: • On is the factory default setting. • This menu item applies to all scan functions.
Menu item Description Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specifies which color to drop during scanning, and how much to increase or decrease the dropout Contrast 0–5 Best for content Specifies the contrast of the output Mirror Image On Off Creates a mirror image of the original document Negative Image On Off Creates a negative image of the original document Shadow Detail 0–4 Adjusts the amount of s
Menu item Description Content Text/Photo Photograph Text Specifies the type of content that will be scanned to USB Notes: • Text/Photo is the factory default setting. Text/Photo is used when the documents are mostly text or line art. • Photograph is used when the document is a high-quality photograph or inkjet print. • Text is used when the document is mostly text.
Menu item Description Sides (Duplex) Off Long edge Short edge Specifies how the text and graphics are oriented on the page Notes: • Off is the factory default setting. • Long edge assumes binding along the long edge of the page (left edge for portrait orientation and top edge for landscape orientation). • Short edge assumes binding along the short edge of the page (top edge for portrait orientation and left edge for landscape orientation).
Menu item Description Scan Preview On Off Specifies whether a preview will appear on the display for scan jobs Notes: • A printer hard disk must be installed in the printer and operating properly for this menu item to be available • Off is the factory default setting.
Menu item Description Paper Source Tray MP Feeder Manual Paper Manual Envelope Specifies the paper source selected to supply paper for the printer to print from the flash drive Collate Off (1,1,1,2,2,2) On (1,2,1,2,1,2) Stacks the pages of a print job in sequence when printing multiple copies Sides (Duplex) 1 sided 2 sided Enables duplex printing (two-sided printing) Duplex Binding Long Edge Short Edge Defines the way duplexed pages are bound and how the printing on the back of the page is orie
Menu item Description Separator Sheets None Between Copies Between Jobs Between Pages Places a sheet of paper between pages, copies, or jobs based on the value selected Separator Sheet Source Tray Manual Feeder Specifies a paper source Blank Pages Do Not Print Print Specifies whether blank pages are inserted in a print job Note: None is the factory default setting. Note: Do Not Print is the factory default setting.
Menu item Description Print Area Normal Whole Page Sets the logical and physical printable area Notes: • This menu does not appear if Edge to Edge is enabled in the printer Setup menu. • Normal is the factory default setting. When attempting to print data in the non-printable area defined by the Normal setting, the printer clips the image at the boundary.
Menu item Description Resource Save On Off Specifies how the printer handles temporary downloads, such as fonts and macros stored in RAM, when the printer receives a job that requires more memory than is available Notes: • Off is the factory default setting. Off sets the printer to retain the downloads only until memory is needed. Downloads are deleted in order to process print jobs. • The On setting retains the downloads during language changes and printer resets.
Menu item Description Collate Off (1,1,1,2,2,2) On (1,2,1,2,1,2) Stacks the pages of a print job in sequence when printing multiple copies Notes: • On is the factory default setting. • The On setting stacks the print job sequentially. • Both settings print the entire job the number of times specified by the Copies menu setting. Separator Sheets None Between Copies Between Jobs Between Pages Specifies whether blank separator sheets are inserted Notes: • None is the factory default setting.
Menu item Description N-up Border None Solid Prints a border around each page image when using N-up (pages-sides) Note: None is the factory default setting. Quality menu Menu item Description Print Resolution 300 dpi 600 dpi 1200 dpi 1200 Image Q 2400 Image Q Specifies the printed output resolution Pixel Boost Off Fonts Horizontally Vertically Both Directions Enhances the printed quality of small fonts and graphics Toner Darkness 1–10 Note: 600 dpi is the factory default setting.
Menu item Description Contrast 0–5 Adjusts the degree of difference between levels of gray in printed output Notes: • 0 is the factory default setting. • Higher settings show more difference between levels of gray. Utilities menu Menu item Description Remove Held Jobs Confidential Held Not Restored All Removes confidential and held jobs from the printer hard disk Notes: • Selecting a setting affects only print jobs that are resident in the printer.
Menu item Description Coverage Estimator Off On Provides an estimate of the percentage coverage of black on a page. The estimate is printed on a separate page at the end of each print job. Note: Off is the factory default setting. PDF menu Menu item Description Scale to Fit Yes No Scales page content to fit the selected paper size Annotations Do Not Print Print Prints annotations in a PDF Note: No is the factory default setting. Note: Do Not Print is the factory default setting.
PCL Emul menu Menu item Description Font Source Resident Disk Download Flash All Specifies the set of fonts used by the Font Name menu item Notes: • Resident is the factory default setting. It shows the factory default set of fonts downloaded into printer RAM. • Flash and Disk settings appear only if applicable and show all fonts resident in that option. • Flash and Disk options must be properly formatted and cannot be Read/Write, Write, or password protected.
Menu item Description PCL Emulation Settings Lines per Page 1–255 Specifies the number of lines that print on each page Notes: • 60 is the US factory default setting. 64 is the international default setting. • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the desired Paper Size and Orientation before setting Lines per Page.
Menu item Description Tray Renumber View Factory Def MPF Default = 8 T1 Default = 1 T2 Default = 4 T3 Default = 5 T4 Default = 20 T5 Default = 21 Env Default = 6 MPaper Default = 2 MEnv Default = 3 Lets you view the factory default setting assigned to each tray, drawer, or feeder, even if it has not been installed Tray Renumber Restore Defaults Yes No Returns all tray, drawer, and feeder assignments to the factory default settings HTML menu Menu item Font Name Albertus MT Antique Olive Apple Chancery
Menu item Description Font Size 1–255 pt Sets the default font size for HTML documents Notes: • 12 pt is the factory default setting. • Font size can be increased in 1-point increments. Scale 1–400% Scales the default font for HTML documents Notes: • 100% is the factory default setting. • Scaling can be increased in 1% increments.
Menu item Description Orientation Portrait Landscape Rev Portrait Rev Landscape Sets the image orientation Note: Portrait is the factory default setting. XPS menu Menu item Description Print Error Pages Off On Prints a page containing information on errors, including XML markup errors Note: Off is the factory default setting. Help menu The Help menu consists of Help pages that are stored in the printer as PDFs. They contain reference information about using the printer and performing tasks.
Maintaining the printer Periodically, certain tasks are required to maintain optimum print quality. Cleaning the exterior of the printer 1 Make sure that the printer is turned off and unplugged from the wall outlet. CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer, unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding. 2 Remove all paper from the printer. 3 Dampen a clean, lint-free cloth with water.
3 Wipe the areas shown and let them dry. 4 Close the scanner cover. Cleaning the ADF separator rollers After you have copied over 50,000 copies using the ADF, clean the ADF separator rollers. 1 Open the ADF cover. 2 Unlock the separator roll. 3 Remove the separator roll. 4 Use a clean, lint-free cloth dampened with water to wipe the separator rollers.
5 Reinstall the separator roll. 6 Lock the separator roll. 7 Close the ADF cover. Adjusting scanner registration Scanner Registration is a process to align the scan area with the paper location. To manually adjust the scanner registration: 1 Turn the printer off. 2 Clean the scanner glass and backing material. 3 Hold down 2 ABC and 6 MNO while turning the printer on. 4 Release the buttons when the screen with the progress bar appears.
To align the scanner glass (flatbed): a Place the Quick Test page facedown on the scanner glass. b Touch Copy Quick Test. The scanner prints a copy of the Quick Test page. c d e f Touch Flatbed. Use the copy of the Quick Test page to adjust the Left Margin and Top Margin settings. Touch Submit. Touch Copy Quick Test and compare the new copy to the original. Repeat the flatbed alignment steps until the position on the page of the Quick Test copy closely matches the original.
• Salty air • Corrosive gases • Heavy dust Checking the status of supplies A message appears on the display when a replacement supply item is needed or when maintenance is required. Checking the status of supplies from the printer control panel 1 Make sure the printer is on and Ready appears. 2 On the home screen, touch Status/Supplies. Note: If Status/Supplies is not on the home screen, then print a menu settings page to review the status of the supplies. 3 Touch View supplies.
Ordering supplies To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place where you purchased the printer. Warning—Potential Damage: Damage caused by the use of a supply or replacement item not produced by the manufacturer of this printer is not covered under warranty.
Ordering ADF replacement parts Order ADF replacement parts if you experience problems with paper double-feeding or failing to feed through the Automatic Document Feeder. Part name Part number ADF input tray 40X5470 ADF separator pad 40X5472 ADF separator roll 40X5471 Moving the printer to another location Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer warranty.
Shipping the printer When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.
Administrative support Finding advanced networking and administrator information This chapter covers basic administrative support tasks. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD and the Embedded Web Server Administrator's Guide on the Lexmark Web site at www.lexmark.com.
To set up e-mail alerts: 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. 2 Click Settings. 3 Under Other Settings, click E-mail Alert Setup. 4 Select the items for notification, and type in the e-mail addresses. 5 Click Submit. Note: See your system support person to set up the e-mail server.
Clearing jams Clearing jams By carefully selecting paper and loading it properly, you can avoid most jams. If jams do occur, follow the steps outlined in this section. To clear a jam message and resume printing, clear the entire paper path, and then touch Continue. If Jam Recovery is set to On, then the printer prints a new copy of the page that jammed. If Jam Recovery is set to Auto, then the printer reprints the jammed page if enough printer memory is available.
Jam message numbers and how to access each jam Jam number To access the jam 200-201 Try one or more of the following: • Remove Tray 1. • Open the front door, and then remove the photoconductor kit. 202 Open the front door, and then open the rear door. 231 Open the front door, and then open the rear door. 233 Remove Tray 1, and then depress the lever. Note: For alternative access to the jam, open the front door, and then open the rear door.
2 Remove the jam if you see it here. 3 If you do not see the jam, open the front door, and then remove the photoconductor kit and toner cartridge. 4 Lift the flap at the front of the printer, and then remove any jammed sheets.
5 If you do not see any jammed sheets, open the rear door. 6 Remove the jam. 7 Close the rear door. 8 Insert the photoconductor kit and toner cartridge. 9 Close the front door. 10 Touch Continue. 202 paper jam Touch Status/Supplies to identify the location of the jam. If the paper is exiting the printer, then pull the paper out, and then touch Continue.
If the paper is not exiting the printer: 1 Pull down the rear door. 2 Remove the jammed paper. 3 Close the rear door. 4 Touch Continue. 231 paper jam CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 1 Open the front door. 1 2 2 Open the rear door.
3 Remove the jam. 4 Close the rear door. 5 Close the front door. 6 Touch Continue.
233 paper jam 1 Remove the tray from the printer. 2 Locate the lever shown, and then pull it down to release and remove the jammed sheets. 3 Insert the tray. 4 Touch Continue. If this does not clear the jam, complete the steps in “231 paper jam” on page 242. 234 paper jam A single jam or multiple jams are in the duplex area of the printer.
235 paper jam 1 Gently pull the jammed sheet out of the standard exit bin. 2 Touch Continue. 240–249 paper jams 1 Touch Status/Supplies to identify the location of the jam. 2 Pull the standard tray out. 3 Remove any jammed paper. 4 Insert the tray, and then touch Continue. 5 If the jam message persists, then pull out any optional trays.
6 Remove the jammed paper, and then insert the trays. 7 Touch Continue. 250 paper jam 1 Touch Status/Supplies to identify the location of the jam. 2 Remove the paper from the multipurpose feeder. 3 Flex the sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 4 Load the paper into the multipurpose feeder. 5 Slide the paper guide toward the inside of the tray until it lightly rests against the edge of the paper.
251 paper jam A sheet of paper failed to feed from the multipurpose feeder. If it is visible, gently pull the jammed sheet out. If the sheet is not visible, complete the following steps: 1 Open the front door, and then remove the photoconductor kit and toner cartridge. 2 Lift the flap at the front of the printer, and then remove any jams. 3 Reinsert the photoconductor kit and toner cartridge. 4 Close the front door. 5 Touch Continue.
290–294 paper jams Clearing jams under the ADF cover 1 Remove all original documents from the ADF. 2 Open the ADF cover. 3 Unlock the separator roll.
4 Remove the separator roll. 5 Remove the jammed paper. 6 Reinstall the separator roll.
7 Lock the separator roll. 8 Close the ADF cover. 9 Touch Continue. Clearing ADF jams by lifting the scanner cover 1 Open the scanner cover, and then remove any jammed pages. 2 Touch Continue.
Clearing ADF duplex jams If you are making a two-sided copy in the ADF, and your original document jams, it may be necessary to perform the following steps to clear the jam: 1 Remove the ADF input tray. 2 Pull out the jammed paper by pulling the sheet on the bottom. 3 Reinstall the ADF input tray. 4 Touch Continue.
Troubleshooting Solving basic printer problems If there are basic printer problems, or the printer is unresponsive, make sure: • • • • • • The power cord is plugged into the printer and a properly grounded electrical outlet. The electrical outlet is not turned off by any switch or breaker. The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords. Other electronic equipment plugged into the outlet is working. The printer is turned on.
Change to is a tray or feeder, and is a paper size or type. You can change the current paper source for the remainder of the print job. The formatted page will print on the paper loaded in the selected tray. This may cause clipping of text or images. Try one or more of the following: • Select the paper tray with the correct paper size or type. • Touch Use current [src] to ignore the message and print from the tray selected for the print job.
Connect bps The fax is connected. Wait for the message to clear. Note: is the baud rate per second. Disk corrupted The printer attempted a hard disk recovery on a corrupted hard disk, and the hard disk cannot be repaired. The hard disk must be reformatted. Touch Reformat disk to reformat the hard disk and clear the message. Note: Reformatting the disk deletes all the files currently stored on the disk.
Fax Station Number not set up The Fax Station Number has not been entered. Sending and receiving faxes is disabled until fax is configured properly. Try one or more of the following: • Touch Continue to clear the message. • Complete the Analog Fax Setup. If the message appears again, contact your system support person. Insert Tray Insert the specified tray into the printer. Install Tray Try one or more of the following: • Install the specified tray: 1 2 3 4 5 Turn the printer off.
Memory full, cannot print faxes There is not enough memory to print the fax job. Touch Continue to clear the message without printing. Held faxes will attempt to print after the printer has been restarted. Network/Network The printer is connected to the network. Network indicates that the printer is using the standard network port built into the printer system board.
Replace if restarting job. One or more messages which interrupted a scan job are now cleared. Replace the original documents in the scanner to restart the scan job. is a page of the scan job. Try one or more of the following: • Touch Cancel Job if a scan job is processing when the message appears. This cancels the job and clears the message. • Touch Scan from Automatic Document Feeder if the page jam recovery is active.
Some held jobs were not restored Touch Continue to delete the specified job. Note: Some held jobs are not restored. They stay on the hard disk and are inaccessible. System busy, preparing resources for job. Not all resources needed for the job are available. Wait for the message to clear. System busy, preparing resources for job. Deleting held job(s). Not all resources needed for the job are available. Some held jobs are deleted to free system memory. Wait for the message to clear.
• Check the Print Properties or Print dialog settings to make sure the print job is requesting the correct paper size and type. • Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper is large enough for the data being printed. • Cancel the current print job. 35 Insufficient memory to support Resource Save feature Try one or more of the following: • Touch Continue to disable Resource Save and continue printing.
50 PPDS font error Try one or more of the following: • Touch Continue to clear the message and continue printing. • The printer cannot find a requested font. From the PPDS menu, select Best Fit, and then select On. The printer will find a similar font and reformat the affected text. • Cancel the current print job. 51 Defective flash detected Try one or more of the following: • Touch Continue to clear the message and continue printing. • Cancel the current print job.
54 Standard network software error Try one or more of the following: • Touch Continue to continue printing. • Turn the printer off and then back on to reset the printer. • Upgrade (flash) the network firmware in the printer or print server. 55 Unsupported option in slot is a slot on the printer system board. Try one or more of the following: 1 Turn the printer power off. 2 Unplug the power cord from the wall outlet. 3 Remove the unsupported option card from the printer system board.
56 Standard USB port disabled Try one or more of the following: • Touch Continue to clear the message. The printer discards any data received through the USB port. • Make sure the USB Buffer menu item is not set to Disabled. 56 USB port disabled is the number of the USB port. Try one or more of the following: • Touch Continue to clear the message. The printer discards any data received through the USB port. • Make sure the USB Buffer menu item is not set to Disabled.
59 Incompatible tray Try one or more of the following: • Remove the specified tray. • Touch Continue to clear the message and continue printing without using the specified tray. 61 Remove defective disk Try one or more of the following: • Touch Continue to clear the message and continue printing. • Install a different printer hard disk before performing any operations that require a printer hard disk.
88.yy Cartridge nearly low The toner is low. Replace the toner cartridge, and then touch Continue to clear the message and continue printing. 88.yy Replace cartridge The toner cartridge is empty. 1 Replace the toner cartridge. 2 Touch Continue to clear the message. 200–282.yy paper jam 1 Clear the paper path. 2 Touch Continue to continue printing. 290-295.yy scanner jam Clear all original documents from the scanner. 293 Replace all originals if restarting job.
294 ADF Jam This jam location may also be identified as 294.04 Duplex Sensor Off Jam, 294.05 Scan Sensor Off Jam, or 294.06 ADF Backfeed Jam. To clear this jam: 1 Remove all pages from the ADF. Note: The message clears when the pages are removed from the ADF. 2 Flex and fan the pages. 3 Place the pages in the ADF. 4 Adjust the ADF guides. 5 From the printer control panel, press . 840.
Solving printing problems Multiple-language PDFs do not print The documents contain unavailable fonts. 1 Open the document you want to print in Adobe Acrobat. 2 Click the printer icon. The Print dialog appears. 3 Click Advanced. 4 Select Print as image. 5 Click OK twice. Error message about reading USB drive appears Make sure the USB drive is supported. For information regarding tested and approved USB flash memory devices, visit the Lexmark Web site at www.lexmark.com.
MAKE SURE YOU ARE USING A RECOMMENDED PRINTER CABLE For more information, visit the Lexmark Web site at www.lexmark.com. MAKE SURE PRINTER CABLES ARE SECURELY CONNECTED Check the cable connections to the printer and print server to make sure they are secure. For more information, see the setup documentation that came with the printer. Confidential and other held jobs do not print These are possible solutions.
CHANGE ENVIRONMENTAL SETTINGS When using Eco-Mode or Quiet Mode settings, you may notice a short delay before the first page is printed. If you want to change the settings and need more information, then see “Using Eco-Mode” on page 71 or “Reducing printer noise” on page 75.
REDUCE THE COMPLEXITY OF THE PRINT JOB Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job. MAKE SURE THE PRINTER HAS ENOUGH MEMORY Add printer memory or an optional hard disk. Unexpected page breaks occur INCREASE THE PRINT TIMEOUT VALUE 1 Make sure the printer is on and Ready appears. 2 On the home screen, touch . 3 Touch Settings. 4 Touch General Settings.
Poor copy quality These are some examples of poor copy quality: • • • • • • • • • • • Blank pages Checkerboard pattern Distorted graphics or pictures Missing characters Faded print Dark print Skewed lines Smudges Streaks Unexpected characters White lines in print These are possible solutions. Try one or more of the following: CHECK THE DISPLAY FOR ERROR MESSAGES Clear any error messages. THE TONER MAY BE LOW When 88 Cartridge low appears or when the print becomes faded, replace the toner cartridge.
PATTERNS (MOIRÉ) APPEAR IN THE OUTPUT • From the printer control panel, press the Content button until the light comes on next to Text/Photo. • Rotate the original document on the scanner glass. • From the printer control panel, press the Scale button and adjust the setting. TEXT IS LIGHT OR DISAPPEARING From the printer control panel, press the Content button until the light comes on next to Text or Text/Photo.
• • • • The power cord is plugged into the printer and a properly grounded electrical outlet. The electrical outlet is not turned off by any switch or breaker. The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords. Other electrical equipment plugged into the outlet is working. Once you have checked each of these possibilities, turn the printer off and then back on. This often fixes the problem with the scanner.
CHECK THE QUALITY OF THE ORIGINAL DOCUMENT Make sure the quality of the original document is satisfactory. CHECK THE DOCUMENT PLACEMENT Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner. Partial document or photo scans These are possible solutions. Try one or more of the following: CHECK THE DOCUMENT PLACEMENT Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
If your region supports multiple caller ID patterns, you may have to change the default setting. There are two settings available: FSK (pattern 1) and DTMF (pattern 2). The availability of these settings by way of the Fax menu depends on whether your country or region supports multiple caller ID patterns. Contact your telecommunications company to determine which pattern or switch setting to use. Cannot send or receive a fax These are possible solutions.
CHECK FOR A DIAL TONE • Place a test call to the telephone number to which you want to send a fax to make sure that it is working correctly. • If the telephone line is being used by another device, then wait until the other device is finished before sending a fax. • If you are using the On Hook Dial feature, then turn up the volume to verify a dial tone. TEMPORARILY DISCONNECT OTHER EQUIPMENT To ensure the printer is working correctly, connect it directly to the telephone line.
3 Click Fax Settings. 4 Click Analog Fax Setup. 5 In the Rings to Answer box, enter the number of times you want the phone to ring before answering. 6 Click Submit. THE TONER MAY BE LOW 88 Cartridge low appears when the toner is low. Can receive but not send faxes These are possible solutions. Try one or more of the following: THE PRINTER IS NOT IN FAX MODE On the home screen, touch Fax to put the printer in Fax mode.
MAKE SURE THE FAX TRANSMISSION SPEED IS NOT SET TOO HIGH Decrease the incoming fax transmission speed: 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. 2 Click Settings. 3 Click Fax Settings. 4 Click Analog Fax Setup. 5 In the Max Speed box, click on one of the following: 2400 4800 9600 14400 33600 6 Click Submit.
Drawers These are possible solutions. Try one or more of the following: MAKE SURE THE PAPER IS LOADED CORRECTLY 1 Pull the tray completely out. 2 Check for paper jams or misfeeds. 3 Make sure the guides are aligned against the edges of the paper. 4 Insert the tray. RESET THE PRINTER Turn the printer off, wait about 10 seconds, and then turn the printer on. Flash memory card Make sure the flash memory card is securely connected to the printer system board.
Solving paper feed problems Paper frequently jams These are possible solutions. Try one or more of the following: CHECK THE PAPER Use recommended paper and specialty media. For more information, see the chapter about paper and specialty media guidelines. MAKE SURE THERE IS NOT TOO MUCH PAPER IN THE PAPER TRAY Make sure the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the multipurpose feeder.
Paper jam message remains after jam is cleared CHECK THE PAPER PATH The paper path is not clear. Clear jammed paper from the entire paper path, and then touch Continue. Page that jammed does not reprint after you clear the jam TURN ON JAM RECOVERY In the Setup menu, Jam Recovery is set to Off. Set Jam Recovery to Auto or On: 1 Make sure the printer is on and Ready appears. 2 On the home screen, touch . 3 Touch Settings. 4 Touch General Settings. 5 Touch the down arrow until Print Recovery appears.
Blank pages These are possible solutions. Try one or more of the following: PACKING MATERIAL MAY BE ON THE TONER CARTRIDGE Remove the toner cartridge and make sure the packing material is properly removed. Reinstall the toner cartridge. THE TONER MAY BE LOW When 88 Cartridge low appears, order a new toner cartridge. If the problem continues, the printer may need to be serviced. For more information, contact Customer Support. Characters have jagged or uneven edges These are possible solutions.
Clipped images These are possible solutions. Try one or more of the following: CHECK THE GUIDES Move the width and length guides in the tray to the correct positions for the paper size loaded. CHECK THE PAPER SIZE SETTING Make sure the paper size setting matches the paper loaded in the tray: 1 From the printer control panel Paper menu, check the Paper Size setting. 2 Before sending the job to print, specify the correct size setting: • For Windows users, specify the size from Print Properties.
CHECK THE TONER DARKNESS SETTING Select a lighter Toner Darkness setting: • From the printer control panel, change the setting from the Quality menu. • For Windows users, change the setting from Print Properties. • For Macintosh users, change the setting from the Print dialog. Incorrect margins These are possible solutions. Try one or more of the following: CHECK THE PAPER GUIDES Move the guides in the tray to the correct positions for the paper size loaded.
Print irregularities These are possible solutions. Try one or more of the following: THE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY • Load paper from a fresh package. • Store paper in its original wrapper until you use it. CHECK THE PAPER TYPE SETTING Make sure the paper type setting matches the paper loaded in the tray: 1 From the printer control panel, check the Paper Type setting from the Paper menu.
Solid black or white streaks ABC DEF ABC DEF These are possible solutions. Try one or more of the following: MAKE SURE THE FILL PATTERN IS CORRECT If the fill pattern is incorrect, then choose a different fill pattern from your software program or application. CHECK THE PAPER TYPE • Try a different type of paper. • Use only transparencies recommended by the printer manufacturer. • Make sure the Paper Type and Paper Texture settings match the paper loaded in the tray or feeder.
THE PAPER HAS ABSORBED MOISTURE DUE TO HIGH HUMIDITY • Load paper from a fresh package. • Store paper in its original wrapper until you use it. CHECK THE PAPER Avoid textured paper with rough finishes. CHECK THE PAPER TYPE SETTING Make sure the paper type setting matches the paper loaded in the tray: 1 From the printer control panel, check the Paper Type setting from the Paper menu.
CHECK THE PAPER Avoid textured paper with rough finishes. CHECK THE PAPER TYPE SETTING Make sure the paper type setting matches the paper loaded in the tray: 1 From the printer control panel, check the Paper Type setting from the Paper menu. 2 Before sending the job to print, specify the correct type setting: • For Windows users, specify the type from Print Properties. • For Macintosh users, specify the type from the Print dialog. THE TONER CARTRIDGE MAY BE DEFECTIVE Replace the toner cartridge.
THERE IS TONER IN THE PAPER PATH Contact Customer Support. Toner fog or background shading appears on the page These are possible solutions. Try one or more of the following: THE TONER CARTRIDGE MAY BE DEFECTIVE Replace the toner cartridge. THE CHARGE ROLLS MAY BE DEFECTIVE Replace the charge rolls. THERE IS TONER IN THE PAPER PATH Contact Customer Support. Toner rubs off These are possible solutions.
Toner specks These are possible solutions. Try one or more of the following: THE TONER CARTRIDGE MAY BE DEFECTIVE Replace the toner cartridge. THERE IS TONER IN THE PAPER PATH Contact Customer Support. Transparency print quality is poor Try one or more of the following: CHECK THE TRANSPARENCIES Use only transparencies recommended by the printer manufacturer.
CHECK THE NETWORK SETTINGS Depending on the network settings, you may need to type https:// instead of http:// before the printer IP address to access the Embedded Web Server. For more information, see your system administrator. Contacting Customer Support When you call Customer Support, describe the problem you are experiencing, the message on the display, and the troubleshooting steps you have already taken to find a solution. You need to know your printer model type and serial number.
Notices Product information Product name: Lexmark X463de, Lexmark X464de, Lexmark X466dte, Lexmark X466dtwe Machine type: 7014, 4569, 4570 Model(s): 431, 636, 63W, n01, n02, g01, g02, n11, n12, g11, g12, hn1, hn2, wh1, wh2 Edition notice February 2009 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC.
UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense. Trademarks Lexmark, Lexmark with diamond design, MarkNet, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. MarkTrack and PrintCryption are trademarks of Lexmark International, Inc.
Stempel Garamond Linotype-Hell AG and/or its subsidiaries Taffy Agfa Corporation Times New Roman The Monotype Corporation plc Univers Linotype-Hell AG and/or its subsidiaries All other trademarks are the property of their respective owners. Federal Communications Commission (FCC) compliance information statement This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
1-meter average sound pressure, dBA Printing 53 dBA Scanning 49 dBA Copying 53 dBA Ready 22 dBA Values are subject to change. See www.lexmark.com for current values. Waste from Electrical and Electronic Equipment (WEEE) directive The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.
ENERGY STAR Laser notice The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1. Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers.
Mode Description Power consumption (Watts) Printing The product is generating hard-copy output from electronic inputs. 540 W Copying The product is generating hard-copy output from hard-copy original documents. 560 W Scanning The product is scanning hard-copy documents. 55 W Ready The product is waiting for a print job. 45 W Power Saver The product is in energy-saving mode. 25 W Off 0W The product is plugged into a wall outlet, but the power switch is turned off.
Industry Canada compliance statement This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003. Avis de conformité aux normes de l’industrie du Canada Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
Les compagnies de téléphone constatent que les surtensions électriques, en particulier celles dues à la foudre, entraînent d'importants dégâts sur les terminaux privés connectés à des sources d’alimentation CA. Il s’agit-là d’un problème majeur d’échelle nationale. En conséquence, il vous est recommandé de brancher un parasurtenseur dans la prise de courant à laquelle l’équipement est connecté.
Verwendung dieses Produkts in der Schweiz Für dieses Produkt muss ein schweizerischer Billing Tone Filter zur Zählzeichenübertragung (Lexmark Teilenummer 14B5109 oder 80D1877) für jede Leitung installiert werden, über die in der Schweiz Zeitsteuertakte übertragen werden. Die Verwendung des Lexmark Filters ist obligatorisch, da in allen analogen Telefonleitungen in der Schweiz Zeitsteuertakte vorhanden sind.
Industry Canada (Canada) This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.
Notice to users in the European Union Products bearing the CE mark are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment. Compliance is indicated by the CE marking.
Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen. Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE. Magyar Alulírott, Lexmark International, Inc.
Limited warranty Lexmark warrants that this product: —Is manufactured from new parts, or new and serviceable used parts, which perform like new parts —Is, during normal use, free from defects in material and workmanship If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).
—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer —Operation of a product beyond the limit of its duty cycle —Use of printing media outside of Lexmark specifications —Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts —Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE
DEVICE LICENSE AGREEMENT The patented printer is licensed for, and designed to work with only genuine Lexmark toner cartridges and developer components for the life of the patented printer. Under this patent license, you agree to: (1) use only genuine Lexmark toner cartridges and developer components with this printer except as otherwise provided below, and (2) pass this license/agreement to any subsequent user of this printer.
3 LIMITATION OF REMEDY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY AND ALL LIABILITY OF LEXMARK UNDER THIS SOFTWARE LICENSE AGREEMENT IS EXPRESSLY LIMITED TO THE GREATER OF THE PRICE PAID FOR THE SOFTWARE PROGRAM AND FIVE U.S. DOLLARS (OR THE EQUIVALENT IN LOCAL CURRENCY).
6 TRANSFER. You may transfer the Software Program to another end-user. Any transfer must include all software components, media, printed materials, and this Software License Agreement and you may not retain copies of the Software Program or components thereof. The transfer may not be an indirect transfer, such as a consignment. Prior to the transfer, the end-user receiving the transferred Software Program must agree to all these Software License Agreement terms.
17 AGREEMENT TO CONTRACT ELECTRONICALLY. You and Lexmark agree to form this Software License Agreement electronically. This means that when you click the “Agree” or “I accept” button on this page or use this product, you acknowledge your agreement to these Software License Agreement terms and conditions and that you are doing so with the intent to “sign” a contract with Lexmark. 18 CAPACITY AND AUTHORITY TO CONTRACT.
Index Numerics 1565 Emulation error, load emulation option 265 200–282.yy paper jam 264 250-sheet drawer installing 50 290-295.yy scanner jam 264 293 Replace all originals if restarting job 264 293.
Power Saver 72 Quiet Mode 75 standard exit bin lighting 73 conserving supplies 70 contacting Customer Support 290 control panel, printer 23 copy quality adjusting 108 improving 115 copy screen options 113, 114 Copy Settings menu 188 copy troubleshooting copier does not respond 269 partial document or photo copies 271 poor copy quality 270 poor scanned image quality 272 scanner unit does not close 269 copying adding a date and time stamp 111 adding an overlay message 112 adjusting quality 108 canceling a cop
Fax Mode (Analog Fax Setup) menu 194 Fax Mode (Fax Server Setup) menu 201 Fax partition inoperative. Contact system administrator. 254 fax quality, improving 142 fax screen advanced options 141 options 140, 141 Fax server 'To Format' not set up. Contact system administrator.
loading multipurpose feeder 82 trays 78 M Macintosh wireless network installation 59 memory card installing 32 troubleshooting 278 Memory full, cannot print faxes 256 menu settings page printing 52 menus Active NIC 164 AppleTalk 170 Confidential Print 178 Configure MP 157 Copy Settings 188 Custom Names 161 Custom Scan Sizes 161 Custom Types 161 Default Source 154 diagram of 153 Disk Wiping 179 E-mail Settings 203 Fax Mode (Analog Fax Setup) 194 Fax Mode (Fax Server Setup) 201 Finishing 218 Flash Drive 211
Paper Size/Type menu 154 paper sizes supported by the printer 93 Paper Texture menu 158 paper type custom 88 paper types duplex support 94 supported by printer 94 where to load 94 Paper Weight menu 159 Parallel menu 173 pausing the current print job to make copies 111 PCL Emul menu 223 PDF menu 222 photoconductor kit ordering 233 photos copying 106 port settings configuring 65 PostScript menu 222 Power Saver adjusting 72 print job canceling from Macintosh 103 canceling from Windows 103 print quality cle
Close front door 253 Connect bps 254 Disk corrupted 254 Disk Full - Scan Job Canceled 254 Fax failed 254 Fax memory full 254 Fax partition inoperative. Contact system administrator. 254 Fax server 'To Format' not set up. Contact system administrator.
scanning to an FTP address creating shortcuts using the computer 145 creating shortcuts using the touch screen 145 improving FTP quality 148 using shortcut numbers 144 using the address book 145 using the keypad 144 Securely clearing disk space 257 Security Audit Log menu 180 Serial 257 Serial menu 175 serial port 67 serial printing setting up 67 Set clock 257 Set Date/Time menu 181 setting paper size 77 paper type 77 TCP/IP address 168 Universal Paper Size 77 setting up fax 123 serial printing 67 s
print irregularities 284 print is too dark 286 print is too light 285 print quality test pages 280 skewed print 284 solid black streaks 285 solid white streaks 285 streaked vertical lines 287 toner fog or background shading 288 toner rubs off 288 toner specks 289 troubleshooting, printer options drawers 278 flash memory card 278 hard disk with adapter 278 Internal Solutions Port 278 memory card 278 option not working 277 paper trays 279 troubleshooting, scan cannot scan from a computer 273 partial document
