Safety data sheet

ManualsBrandsLEXMARK ManualsLexmark Ink CartridgesInk cartridge Original 34 Black

_____________________________________________________________________________________________

High Yield Black Print Cartridge

_____________________________________________________________________________________________

Lexmark has determined that Material Safety Data Sheets are not required for print cartridges. For customer

convenience, Lexmark provides product information in this familiar format.

Material Safety Data Sheet

PN 18C0034

Section 1 - Product and Company Identification

Section 2 - Composition / Information on Ingredients

Ingredients Percent (wt.) CAS No. OSHA PELS ACGIH TLV

Carbon Black 1-5 1333-86-4 3.5 mg/m³ TWA 3.5 mg/m³ TWA

Acrylic Terpolymer 0.1-2 Trade Secret None None

Water Soluble Organic Solvents 10-20 Trade Secret None None

Hydroxylated Alkane

NJTSRN 80100451-5004

1-10 Trade Secret None None

Water 60-78 7732-18-5 None None

Section 3 - Hazards Identification

The following information is based on testing of the product as a whole and/or characteristics of components.

Hazard Information: Primary Routes of Exposure: Ingestion, skin contact.

Inhalation: If ink mist is inhaled, respiratory tract irritation may occur. Exposure not probable

with intended use. No adverse chronic effects known at intended level of use.

Skin Contact: Not an irritant. Exposure not probable with intended use. Not a dermal sensitizer.

Eye Contact: Not an irritant. Exposure not probable with intended use.

Ingestion: Low acute oral toxicity. Exposure not probable with intended use.

Section 4 - First Aid Measures

Inhalation: If symptoms, such as shortness of breath or persistent coughing are experienced,

remove source of contamination and move individual to fresh air. If symptoms

persist, seek medical attention.

Skin Contact: Wash with soap and water. Should irritation occur, seek medical attention.

Eye Contact: Flush immediately with plenty of water. Remove contact lenses and continue

flushing for at least 15 minutes. If irritation develops and persists, seek medical

attention.

18C0034

Revision Date: 01/22/2004

Page 1 of 4

Product ID:

Emergency: 1-859-232-3333

18C0034

Product Name:

740 West New Circle Road

High Yield Black Print Cartridge

Chemical

Family:

Inkjet Cartridge Lexington, KY 40550

Manufacturer:

Application: Inkjet Printer

Lexmark International, Inc.

Information: 1-859-232-3000

Prepared By: Product Environmental Programs

Summary of content (4 pages)

PAGE 1
Material Safety Data Sheet PN 18C0034 _____________________________________________________________________________________________ High Yield Black Print Cartridge _____________________________________________________________________________________________ Lexmark has determined that Material Safety Data Sheets are not required for print cartridges. For customer convenience, Lexmark provides product information in this familiar format.
PAGE 2
Ingestion: Immediately wash mouth out with plenty of water. Do not induce vomiting. Slowly dilute with 1-2 glasses of water or milk and seek medical attention. Never give anything by mouth to an unconscious person. Aggravated Conditions: None known Notes to Physician: No specific antidote.
PAGE 3
Section 9 - Physical and Chemical Properties Physical State: Cartridge contains liquid ink Color: Black Odor: Faint Solubility in Water: Fully Miscible Pressurized: No pH: 7.0-8.5 Specific Gravity: Approx. 1.
PAGE 4
Section 14 - Transport Information DOT Status: DOT Shipping Name: Hazard Class: Not classified as a hazardous material or substance under US DOT. Not applicable DOT Reportable Quantity: Not applicable Not applicable DOT Packing Group: Not applicable Section 15 - Regulatory Information TSCA (USA) All ingredients are listed on the Toxic Substances Control Act (TSCA) inventory, have been registered, or are exempt.