Printer Installation and User's Guide

102
Note: With V3R7 you enter the TCP/IP address and port number in
the printer device description. It is not entered here.
Press <ENTER> to create the PSF object.
3. Create a printer device description for your printer using
CRTDEVPRT
. See the
example on page 106.
Note: Only the required fields are listed.
Type
CRTDEVPRT
and press <F4>. Enter the following information:
Device description DEVD
OPTRA
(OPTRA is a user defined name.)
Device class DEVCLS
*LAN
Device type TYPE
*IPDS
Device model MODEL
0
Press <ENTER>
LAN attachment LANATTACH
*IP
Press <F9> to get all of the parameters.
Advanced function printing AFP
*YES
Port number PORT
9100
(9100 or 9600 for MarkNet internal print server)
(9100 for Parallel 1 on MarkNet Pro external print server or MarkNet XLe)
(9102 for Parallel 2 on MarkNet Pro external print server or MarkNet XLe)
Refer to 4.3.14 IPDS Timeout on page 40 for further information on the
selection of ports.
Press <PAGE DOWN> (or <ROLL UP>)