Owners manual

Set Date and Time menu
Use To
Current Date and Time Show the current date and time settings for the printer.
Manually Set Date and Time
[input date/time]
Enter the date and time.
Notes:
• For touch‑screen printer models, date and time are set in YYYY-MM-DD
HH:MM format.
• Manually setting the date and time sets Enable NTP to No.
• For non‑touch‑screen printer models, the wizard lets you set the date
and time in YYYY‑MM‑DD‑HH:MM format.
Time Zone
[list of time zones]
Select the time zone.
Note: GMT is the factory default setting for non‑touch‑screen printer models.
Automatically observe DST
On
O
Set the printer to use the applicable daylight saving time (DST) start and end
times associated with the printer Time Zone setting.
Note: On is the factory default setting.
Enable NTP
On
O
Enable Network Time Protocol, which synchronizes the clocks of devices on a
network.
Notes:
• On is the factory default setting.
• The setting is turned o if you manually set the date and time.
Understanding the printer menus 137