Owners manual

Use To
Download Target
RAM
Flash
Set the storage location for downloads.
Notes:
• RAM is the factory default setting. Storing downloads in
the RAM is temporary.
• Storing downloads in a flash memory or on a printer hard
disk places them in permanent storage. Downloads
remain in the flash memory or printer hard disk even
when the printer is turned
o.
• This menu item appears only when a flash or disk option
is installed.
Resource Save
On
O
Specify how the printer handles temporary downloads, such
as fonts and macros stored in the RAM, when the printer
receives a print job that requires more memory than is
available.
Notes:
• O is the factory default setting. O sets the printer to
retain downloads only until memory is needed.
Downloads are deleted in order to process print jobs.
• On sets the printer to retain downloads during language
changes and printer resets. If the printer runs out of
memory, then Memory Full 38 appears on the printer
display, but downloads are not deleted.
Print All Order
Alphabetical
Oldest First
Newest First
Specify the order in which held and confidential jobs are
printed when Print All Order is selected.
Note: Alphabetical is the factory default setting.
Finishing menu
Use To
Sides (Duplex)
1 sided
2 sided
Specify whether two‑sided printing is set as the default for all print jobs.
Notes:
• 1 sided is the factory default setting.
• You can set two‑sided printing from the printer software.
Duplex Binding
Long Edge
Short Edge
Define the way two‑sided pages are bound and printed.
Notes:
• Long Edge is the factory default setting. Long Edge binds pages along
their long edge (left edge for portrait and top edge for landscape).
• Short Edge binds pages along their short edge (top edge for portrait and
left edge for landscape).
Copies
1–999
Specify the default number of copies for each print job.
Note: 1 is the factory default setting.
Understanding the printer menus 149