Owners manual

Imaging unit nearly low [84.xy]
If necessary, select Continue on the printer control panel to clear the message and continue printing. For
nontouchscreen printer models, press
to
confirm.
Imaging unit very low, [x] estimated pages remain [84.xy]
You may need to replace the imaging unit very soon. For more information, see the "Replacing supplies"
section of the User’s Guide.
If necessary, select Continue on the printer control panel to clear the message and continue printing. For
nontouchscreen printer models, press
to
confirm.
Incorrect paper size, open [paper source] [34]
Note: The paper source can be a tray or a feeder.
Try one or more of the following:
Load the correct size of paper in the paper source.
From the printer control panel, select Continue to clear the message and print using a
dierent
paper
source. For nontouchscreen printer models, press
to confirm.
Check the length and width guides of the paper source and make sure the paper is loaded properly.
Make sure the correct paper size and type are specified in the Printing Preferences or in the Print dialog.
Make sure the paper size and type are specified in the Paper menu on the printer control panel.
Make sure that the paper size is correctly set. For example, if Multipurpose Feeder Size is set to
Universal, then make sure the paper is large enough for the data being printed.
Cancel the print job.
Insert Tray [x]
Insert the indicated tray into the printer.
Insucient
memory to support Resource Save feature [35]
Install additional printer memory or select Continue on the printer control panel to disable Resource Save,
clear the message, and continue printing. For nontouchscreen printer models, press
to
confirm.
Insucient
memory to collate job [37]
Try one or more of the following:
From the printer control panel, select Continue to print the part of the job already stored and begin
collating the rest of the print job. For nontouchscreen printer models, press
to confirm.
Cancel the current print job.
Troubleshooting 183