Operation Manual

Menu item Description

Compatibility

802.11b/g

802.11b/g/n

Speciﬁes the wireless standard for the wireless network

Note: The 802.11b/g/n is the factory default setting.

Choose Network

[list of available networks]

Lets you select an available network for the printer to use

View Signal Quality Lets you view the quality of the wireless connection

View Security Mode Lets you view the encryption method that a wireless network uses

Note: Wi-Fi Protected Setup (WPS) is a simple and secure

conﬁguration

that lets you establish a wireless

network and enable network security without requiring prior knowledge of Wi‑Fi technology. It is no longer

necessary to conﬁgure the network name (SSID) and WEP key or WPA passphrase for network devices.

AppleTalk menu

To access the menu, navigate to either of the following:

• Network/Ports > Standard Network > Standard Network Setup > AppleTalk

• Network/Ports > Network [x] > Network [x] Setup > AppleTalk

Use To

Activate

Ye s

Enable or disable AppleTalk support.

Note: No is the factory default setting.

View Name Show the assigned AppleTalk name.

Note: The AppleTalk name can be changed only from the Embedded

Web Server.

View Address Show the assigned AppleTalk address.

Note: The AppleTalk address can be changed only from the Embedded

Web Server.

Set Zone

[list of zones available on the

network]

Provide a list of AppleTalk zones available on the network.

Note: The default zone for the network is the factory default setting.

Understanding the printer menus 108