Operation Manual

Use To
Print Recovery
Auto Continue
Disabled
5–255
Let the printer automatically continue printing from certain
oine situations when these are not resolved within the
specified
time period.
Note: Disabled is the factory default setting.
Print Recovery
Jam Recovery
On
O
Auto
Specify whether the printer reprints jammed pages.
Notes:
• Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
• On sets the printer to always reprint jammed pages.
•
O
sets the printer to never reprint jammed pages.
Print Recovery
Page Protect
O
On
Successfully print a page that may not have printed otherwise.
Notes:
• O is the factory default setting. This prints a partial
page when there is not enough memory to print the
whole page.
• On sets the printer to print the entire page.
Press Sleep Button
Do Nothing
Sleep
Hibernate
Determine how the printer, while in idle state, reacts to a short
press of the Sleep button.
Note: Sleep is the factory default setting.
Press and Hold Sleep Button
Hibernate
Determine how the printer, while in idle state, reacts to a long
press of the Sleep button.
Factory Defaults
Do Not Restore
Restore Now
Use the printer factory default settings except the
Network/Ports menu settings.
Notes:
• Do Not Restore is the factory default setting.
• All downloads stored in the RAM are deleted.
Downloads stored in the flash memory or on a hard disk
are not
aected.
Understanding the printer menus 126