Operation Manual

Paper jam in the fuser
1 Open door A by lifting the release latch and lowering the door.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface to cool before touching.
2 Lift the green lever.
2
1
3 Firmly grasp the jammed paper on each side, and then gently pull it out.
Warning—Potential Damage: Do not touch the center of the fuser unit. Doing so will damage the fuser.
Note: Make sure all paper fragments are removed.
4 Push the green lever back into place.
5 Close door A.
6 If necessary, touch Continue from the printer control panel.
Paper jam under the fuser
1 Open door A.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface to cool before touching.
2 If the jammed paper is visible under the fuser, then firmly grasp the paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
3 Close door A.
4 If necessary, touch Continue from the printer control panel.
203 paper jam
If the jammed paper is visible in the standard exit bin, then
firmly
grasp the paper on each side, and then gently
pull it out.
Clearing jams 182