Operation Manual

250 paper jam
1 Remove any jammed pages from the multipurpose feeder.
2 Load paper into the multipurpose feeder.
3 If necessary, touch Continue, jam cleared from the printer control panel.
281 paper jam
Paper jam in door A
1 Open door A.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface to cool before touching.
2 Determine where the jam is located, and then remove it:
a If the paper is visible under the fuser, firmly grasp it on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
b If the paper is not visible, then you will need to remove the fuser unit.
Warning—Potential Damage: Do not touch the center of the fuser unit. Doing so will damage the
fuser.
Clearing jams 192