Operation Manual

Make sure the fuser is not worn or defective
Replace the worn or defective fuser.
Make sure the printer has recalibrated recently
Perform color adjust from the Quality menu.
Make sure the application has not
specified
an
o
‑white background
Check the application settings.
Make sure no toner is in the paper path
Contact customer support.
Toner rubs o
Try one or more of the following:
Check the paper type and weight settings
Make sure the paper type and weight settings match the paper loaded in the tray or feeder:
1 From the printer control panel Paper menu, check the Paper Type and Paper Weight settings. Change
the Paper Weight setting from Normal to Heavy.
2 Before sending the print job, specify the correct paper type setting:
• For Windows users, specify the paper type from Print Properties.
• For Macintosh users, specify the paper type from the Print dialog.
Check the paper texture setting
From the printer control panel Paper menu, make sure the Paper Texture setting matches the paper loaded
in the tray or feeder. If necessary, change the Paper Texture setting from Normal to Rough.
Make sure the fuser is not worn or defective
Replace the worn or defective fuser. For more information, see the instruction sheet that came with the
replacement part.
Troubleshooting 234