Operation Manual

12
Prepare the printer
Step 4: Prepare the printer
Positioning the printer Once you have selected a location and
positioned an optional drawer (if you have
one), you are ready to position the
printer.
Note: If you have optional memory to install, leave
clearance behind the printer.
Lift the printer by the recessed handholds
on both sides, and place it on the table or
optional drawer.
CAUTION: The printer weighs 30.4 kg (67 lb), and
requires at least two people to lift it safely.
To position the printer on an optional
drawer:
1 Align the posts, slots, and
connector on the drawer with the
underside of the printer.
2 Lower the printer into place. Make
sure it is seated securely on the
drawer.
Slot
Post
Connector