Operation Manual

17
Set up the optional duplex unit
Step 5: Set up the optional
duplex unit
Attaching the optional duplex unit Your printer supports an optional duplex
unit which lets you print on both sides of
a page.
CAUTION: If you are installing an optional duplex unit
sometime after setting up the printer, turn the printer off
and unplug the power cord before continuing.
1 Unpack the duplex unit and
discard the packing material.
Note: When you add or remove the optional duplex unit,
remember to update the printer configuration through your
printer driver.
2 Use a flathead screwdriver to
carefully remove the connector
cover, and the upper and lower
duplex covers, from the back of the
printer.