Operation Manual

iii
Contents
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
About the printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Other sources of information . . . . . . . . . . . . . . . . . . . . . . . . . .2
Step 1: Unpack the printer . . . . . . . . . . . . . . . . . . . . . . . . . .4
Getting ready for setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Step 2: Install printer supplies . . . . . . . . . . . . . . . . . . . . . . . 6
Installing toner cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Installing the photodeveloper cartridge . . . . . . . . . . . . . . . . . . .9
Step 3: Position the optional drawer . . . . . . . . . . . . . . . . . 11
Step 4: Prepare the printer . . . . . . . . . . . . . . . . . . . . . . . . . 12
Positioning the printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Securing the drawer to the printer . . . . . . . . . . . . . . . . . . . . .13
Attaching an operator panel overlay . . . . . . . . . . . . . . . . . . . .15
Adjusting tray 2 margins . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Step 5: Set up the optional duplex unit . . . . . . . . . . . . . . . 17
Attaching the optional duplex unit . . . . . . . . . . . . . . . . . . . . . .17
Adjusting duplex margins . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Step 6: Install memory, firmware, or option cards . . . . . . 22
Removing the system board . . . . . . . . . . . . . . . . . . . . . . . . . .23
Installing printer memory . . . . . . . . . . . . . . . . . . . . . . . . . . . .24