Operation Manual

UTILITIES MENU
1
Menu
2
Select
3
Return
4
Go
5
Stop
6
3 Press Menu until you see Print Net Setup, and then press
Select. The network setup page prints and the printer returns to
Ready status.
4 Check the first section on the network setup page and confirm
that Status is “Connected.”
If Status is “Not Connected,” your LAN drop may not be active
or your network cable may be malfunctioning. Consult your
network administrator for a solution, and then print another
network setup page to verify that you are connected to your
network.
Save the network setup page. You will use it in the other steps.
What do I do next?
Task Go to page…
Configure for TCP/IP 66
Install drivers for network printing 68
Verify printer setup
65