Printer User Manual

1 Remove the thumbscrew from each side of the fuser unit by rotating them counterclockwise.
2 Lift the handles on each side of the fuser, and then pull to remove the fuser unit.
2
1
1
3 Firmly grasp the jammed paper on each side, and then gently pull it down and out.
2
1
Notes:
• Make sure all paper fragments are removed.
• If the paper is in the fuser, then lower the fuser nip release lever and switch it to envelope mode.
• After removing the jammed paper, return the lever to the proper position.
4 Align the fuser unit using the handles on each side, and then place it back into the printer.
1
2
2
3 Close door A.
4 If necessary, touch Continue from the printer control panel.
Clearing jams 205