Operation Manual

preparing to set up the printer on
an Ethernet network 20
print driver
hardware options, adding 19
print irregularities 154
print job
canceling from the printer control
panel 48
canceling, from computer 48
print quality
replacing a developer unit 107
replacing imaging kit 98
replacing the waste toner
bottle 95
print quality troubleshooting
blank pages 158
characters have jagged edges 149
clipped pages or images 150
gray background on prints 151
horizontal voids appear on
prints 151
print irregularities 154
print is too dark 155
print is too light 156
printer is printing solid black
pages 158
repeating print defects 159
shadow images appear on
prints 160
skewed print 160
streaked horizontal lines appear
on prints 161
streaked vertical lines appear on
prints 162
toner fog or background shading
appears on prints 163
toner rubs off 164
toner specks appear on prints 164
transparency print quality is
poor 165
uneven print density 165
vertical voids appear on
prints 165
print troubleshooting
incorrect characters print 144
incorrect margins on prints 152
jammed pages are not
reprinted 143
job prints from wrong tray 145
job prints on wrong paper 145
jobs do not print 146
Large jobs do not collate 145
paper curl 153
paper frequently jams 143
print job takes longer than
expected 147
printing slows down 146
tray linking does not work 148
unexpected page breaks
occur 149
printer 19
configurations 9
minimum clearances 8
models 9
moving 8, 113
selecting a location 8
shipping 114
printer control panel
factory defaults, restoring 117
using 10
printer information
where to find 7
printer is printing blank pages 158
printer message
Jam, duplex area. Open front
door. [23y.xx] 124
printer messages
[Color] cartridge low [88.xy] 130
[Color] cartridge nearly low
[88.xy] 130
[Color] cartridge very low, [x]
estimated pages remain
[88.xy] 130
[Type] imaging kit low [84.xy] 137
[Type] imaging kit nearly low
[84.xy] 138
[Type] imaging kit very low, [x]
estimated pages remain
[84.xy] 138
Adjusting color 129
Bin full. Remove paper. 129
Cannot collate large document
[37] 129
Change [paper source] to [custom
string] 129
Change [paper source] to [custom
type name] 129
Change [paper source] to [paper
type] [paper size] 129
Close door 130
Complex page may misprint
[39] 130
Error reading USB drive. Remove
USB. 130
Incompatible tray [x] [59] 130
Insert tray [x] 130
Jam, front door [20y.xx] 123
Jam, fuser. Open front door.
[202.xx] 125
Jam, manual feeder [251.xx] 121
Jam, Multipurpose feeder
[250.xx] 121
Jam, standard bin [203.xx] 123
Jam, tray [x] [24y.xx] 127
Load [paper source] with [custom
string] 131
Load [paper source] with [custom
type name] 131
Load [paper source] with [paper
size] 131
Load [paper source] with [paper
type] [paper size] 131
Load Manual Feeder with [custom
string] 132
Load Manual Feeder with [custom
type name] 132
Load Manual Feeder with [paper
size] 132
Load Manual Feeder with [paper
type] [paper size] 132
Maintenance kit low [80.xy] 132
Maintenance kit nearly low
[80.xy] 133
Maintenance kit very low, [x]
estimated pages remain
[80.xy] 133
Memory full [38] 133
Memory low, no Resource Save
[35] 133
Network error, port [x] [54] 133
Network error, standard port
[54] 133
Non‑Lexmark [color] [supply type],
see User’s Guide [33.xy] 134
Paper too short [34] 134
Printer restart. Check last job. 134
Rear USB port disabled [56] 135
Reinstall missing or unresponsive
[color] cartridge [31.xy] 135
Reload printed pages in Tray
[x] 135
Remove packaging material, check
all 135
Replace [color] cartridge, 0
estimated pages remain
[88.xy] 135
Index 188