Operation Manual

Notes:
• The x and y values represent .xy in the error code that appears on the printer control panel.
• The x and y values must match for printing to continue.
Replace [type] imaging kit, 0 estimated pages remain [84.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Replace the indicated imaging kit to clear the message and continue printing. For more information, see the instruction
sheet that came with the supply.
Note: If you do not have a replacement imaging kit, then see the “Ordering supplies” section of the User’s Guide or
visit
www.lexmark.com.
Replace all originals if restarting job.
From the printer control panel, try one or more of the following:
• Select Scan from automatic feeder, and then press to continue scanning from the ADF immediately after the
last successful scan job.
• Select Scan from flatbed, and then press to continue scanning from the scanner glass immediately after the
last successful scan job.
• Select Finish job without further scanning, and then press to end the last successful scan job.
Note: This does not cancel the scan job. All successfully scanned pages will be processed further for copying or
e-mailing.
• Select Restart Job, and then press to restart the scan job with the same settings from the previous scan job.
• Select Cancel Job, and then press to clear the message and cancel the scan job.
Remove defective disk [61]
Remove and replace the defective printer hard disk.
Replace defective [color] cartridge [31.xy]
Replace the defective toner cartridge to clear the message. For more information, see the instruction sheet that came
with the supply.
Note: If you do not have a replacement toner cartridge, then see the “Ordering supplies” section of the User’s Guide
or visit
www.lexmark.com.
Replace defective [type] imaging kit [31.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Replace the defective imaging kit to clear the message and continue printing. For more information, see the instruction
sheet that came with the supply.
Troubleshooting 259