CX410 Series User's Guide October 2012 Machine type(s): 7527 Model(s): 415, 436 www.lexmark.
Contents 2 Contents Safety information.......................................................................................7 Learning about the printer...........................................................................9 Finding information about the printer......................................................................................................9 Selecting a location for the printer.......................................................................................................
Contents 3 Networking..............................................................................................................................................38 Verifying printer setup............................................................................................................................43 Loading paper and specialty media............................................................45 Setting the paper size and type..................................................................
Contents 4 E-mailing a document..............................................................................................................................86 Customizing e-mail settings.....................................................................................................................88 Canceling an e-mail.................................................................................................................................89 Understanding the e-mail options....................
Contents 5 Erasing non‑volatile memory................................................................................................................207 Erasing printer hard disk memory.........................................................................................................208 Configuring printer hard disk encryption..............................................................................................208 Finding printer security information.........................................
Contents 6 Troubleshooting.......................................................................................256 Understanding the printer messages....................................................................................................256 Solving printer problems.......................................................................................................................270 Solving print problems......................................................................................
Safety information 7 Safety information Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible. Do not place or use this product near water or wet locations. CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Safety information 8 CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before proceeding. CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning storm.
Learning about the printer 9 Learning about the printer Finding information about the printer What are you looking for? Find it here Initial setup instructions: Setup documentation—The setup documentation came with the printer and is also available at http://support.lexmark.com.
Learning about the printer 10 What are you looking for? Find it here The latest supplemental information, updates, and customer support: Lexmark Support Web site— http://support.lexmark.com • • • • • Documentation Note: Select your country or region, and then select your product to view the appropriate support site.
Learning about the printer 1 Right side 305 mm (12 in.) 2 Front 508 mm (20 in.) 3 Left side 76 mm (3 in.) 4 Rear 101.6 mm (4 in.) 5 Top 762 mm (30 in.) 11 Printer configurations CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using multiple input options. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, then you may need additional furniture.
Learning about the printer Basic models 1 Printer control panel 2 Automatic document feeder (ADF) 3 Standard bin 4 Top door latch 5 Right side cover 6 Standard 250-sheet tray (Tray 1) 7 Manual feeder 8 Optional 650-sheet duo tray with integrated multipurpose feeder (Tray 2) 9 Optional 550-sheet tray (Tray 3) Understanding the basic functions of the scanner • • • • • Make quick copies or set the printer to perform specific copy jobs. Send a fax using the printer control panel.
Learning about the printer 13 Using the ADF and scanner glass Automatic document feeder (ADF) Scanner glass Use the scanner glass for single‑page documents, book pages, Use the ADF for multiple‑page documents including two- small items (such as postcards or photos), transparencies, photo sided (duplex) pages. paper, or thin media (such as magazine clippings). Using the ADF When using the ADF: • • • • • Load the document into the ADF tray faceup, short edge first.
Understanding the printer control panel 14 Understanding the printer control panel Using the printer control panel Use the To 1 Display 2 Home button Go to the home screen. 3 Help button Go to the Help menus. 4 Clear all / Reset button Reset the default settings of a function, such as printing, copying, or e-mailing. 5 Keypad Enter numbers, letters, or symbols. 6 Sleep button Enable Sleep mode or Hibernate mode. 7 Cancel button Cancel all printer activity.
Understanding the printer control panel Touch 15 To 1 Copy Access the Copy menus and make copies. 2 Fax Access the Fax menus and send fax. 3 E‑mail Access the E-mail menus and send e‑mails. 4 FTP Access the File Transfer Protocol (FTP) menus and scan documents directly to an FTP server. 5 Menu icon Access printer menus. Note: The menus are available only when the printer is in ready state. 6 Status message bar • Show the current printer status such as Ready or Busy.
Understanding the printer control panel 16 Feature Description Warning If an error condition occurs, then this icon appears. Printer IP address The IP address of your printer is located at the top left corner of the home screen and appears as four sets of numbers separated by periods. You can use the IP address when accessing the Embedded Web Server to view and remotely configure printer settings even when you are not physically near the printer. Example: 123.123.123.
Understanding the printer control panel 17 1 7 6 5 Touch To 1 Arrows View a list of options. 2 Copy It Print a copy. 3 Advanced Options Select a copy option. 4 Home Go to the home screen. 5 Increase Select a higher value. 6 Decrease Select a lower value. 7 Tips Open a context-sensitive Help dialog. 4 3 2 Other touch-screen buttons Touch To Accept Save a setting. Cancel Reset • Cancel an action or a selection.
Setting up and using the home screen applications 18 Setting up and using the home screen applications Notes: • Your home screen may vary depending on your home screen customization settings, administrative setup, and active embedded applications. Some applications are supported only in select printer models. • There may be additional solutions and applications available for purchase. To learn more, visit www.lexmark.com or inquire at your point of purchase.
Setting up and using the home screen applications 19 3 Click Advanced > TCP/IP. 4 Look for IPv4 Address. Finding the IP address of the printer Note: Make sure your printer is connected to a network or to a print server. You can find the printer IP address: • From the top left corner of the printer home screen. • From the TCP/IP section in the Network/Ports menu. • By printing a network setup page or menu settings page, and then finding the TCP/IP section.
Setting up and using the home screen applications 20 Understanding the different applications Use To Card Copy Scan and print both sides of a card on a single page. For more information, see “Setting up Card Copy” on page 21. Fax Scan a document, and then send it to a fax number. For more information, see “Faxing” on page 92. Forms and Favorites Quickly find and print frequently used online forms directly from the printer home screen.
Setting up and using the home screen applications Use 21 To Streamline work processes by letting you quickly find and print frequently used online forms directly from the printer home screen. Note: The printer must have permission to access the network folder, FTP site, or Web site where the bookmark is stored. From the computer where the bookmark is stored, use sharing, security, and firewall settings to allow the printer at least a read access.
Setting up and using the home screen applications 22 3 Change the default scanning options, if necessary. • Default tray—Select the default tray to be used for printing scan images. • Default number of copies—Specify the number of copies that should automatically print when the application is used. • Default contrast setting—Specify a setting to increase or decrease the level of contrast when a copy of the scanned card is printed.
Setting up and using the home screen applications 23 1 Open a Web browser, and then type the printer IP address in the address field. Note: View the printer IP address on the printer home screen. The printer IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. 2 Click Settings > Apps > Apps Management > Multi Send. 3 From the Profiles section, click Add, and then customize the settings.
Setting up and using the home screen applications 24 To use the application, touch Scan to Network on the printer home screen, and then follow the instructions on the printer display. Setting up Remote Operator Panel This application shows the printer control panel on your computer screen and lets you interact with the printer control panel, even when you are not physically near the network printer.
Setting up and using the home screen applications 25 3 To export or import a configuration for multiple applications, do the following: a Click Settings > Import/Export. b Do either of the following: • To export a configuration file, click Export Embedded Solutions Settings File, and then follow the instructions on the computer screen to save the configuration file.
Additional printer setup Additional printer setup Installing internal options CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electircal outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Additional printer setup 27 Accessing the controller board CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. 1 Access the controller board at the back of the printer.
Additional printer setup 28 1 2 1 Memory card connector 2 Option card connector 5 Reattach the cover.
Additional printer setup 6 Turn the screws clockwise to lock the cover. Installing a memory card CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. 1 Access the controller board.
Additional printer setup 30 3 Align the notch (1) on the memory card with the ridge (2) on the connector. 1 2 4 Push the memory card straight into the connector, and then push the card toward the controller board wall until it clicks into place. 1 2 5 Close the controller board access cover.
Additional printer setup 31 Installing an optional card CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Additional printer setup 32 4 Push the card firmly into place as shown in the illustration. Warning—Potential Damage: Improper installation of the card may cause damage to the card and the controller board. Note: The entire length of the connector on the card must touch and be flushed against the controller board. 5 Close the controller board access door.
Additional printer setup 33 Installing hardware options Order of installation CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing.
Additional printer setup 3 Align the 650‑sheet duo tray with the 550‑sheet tray, and then lower it into place. Notes: • If you are installing both the optional trays, then the 550‑sheet tray (Tray 3) must always be below the 650‑sheet tray (Tray 2). • The standard 250‑sheet tray can be labeled as Tray 1 by using the tray number label that came with the optional tray. 4 Align the printer with the 650‑sheet duo tray, and then lower the printer into place.
Additional printer setup 35 5 Install the dust covers. Note: When the printer software and any hardware options are installed, you may need to manually add the options in the printer driver to make them available for print jobs. For more information, see “Updating available options in the printer driver” on page 37. Attaching cables CAUTION—POTENTIAL INJURY: Do not use the fax feature during a lightning storm.
Additional printer setup 36 7 1 6 2 3 5 4 Use the To 1 Rear USB port Attach an optional wireless network adapter or an optional printer hard disk. 2 Security lock port Lock the controller board. 3 Printer power cord socket Connect the printer to a properly grounded electrical outlet.
Additional printer setup 37 • Close all open software programs before installing the printer software. 1 Obtain a copy of the software installer package. • From the Software and Documentation CD that came with your printer. • From our Web site: Go to http://support.lexmark.com, and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system 2 Double‑click the software installer package. Wait for the installation dialog to appear.
Additional printer setup 38 2 Depending on your device, do either of the following: • Press and hold the printer you want to update. • Right‑click the printer you want to update. 3 From the menu that appears, do either of the following: • For Windows 7 or later, select Printer properties. • For earlier versions, select Properties. 4 Click the Configuration tab. 5 Do either of the following: • Click Update Now ‑ Ask Printer. • Under Configuration Options, manually add any installed hardware options.
Additional printer setup 39 You will need an Ethernet cable to connect the printer to the network and an available port where the printer can physically connect to the network. Use a new network cable when possible to avoid potential problems caused by a damaged cable. Installing the printer on an Ethernet network For Windows users 1 Obtain a copy of the software installer package. • From the Software and Documentation CD that came with your printer. • From our Web site: Go to http://support.lexmark.
Additional printer setup 40 3 Install the printer driver on the computer. a Insert the Software and Documentation CD, and then double‑click the installer package for the printer. b Follow the instructions on the computer screen. c Select a destination, and then click Continue. d From the Easy Install screen, click Install. e Type the user password, and then click OK. All the necessary applications are installed on the computer. f Click Close when installation is complete. 4 Add the printer.
Additional printer setup 41 • Security Method—There are four basic options for Security Method: – WEP key If your network uses more than one WEP key, then enter up to four in the provided spaces. Select the key currently in use on the network by selecting the default WEP transmit key. – WPA or WPA2 preshared key or passphrase WPA includes encryption as an additional layer of security. The choices are AES or TKIP.
Additional printer setup 42 Use To Search for networks Show available wireless connections. Note: This menu shows all broadcast secured or unsecured SSIDs. Enter a network name Manually type the SSID. Note: Make sure to type the correct SSID. Wi‑Fi Protected Setup Connect the printer to a wireless network using Wi‑Fi Protected Setup. 3 Follow the instructions on the printer display.
Additional printer setup 43 Connecting the printer to a wireless network using the Embedded Web Server Before you begin, make sure that: • Your printer is connected temporarily to an Ethernet network. • A wireless network adapter is installed in your printer and working properly. For more information, see the instruction sheet that came with the wireless network adapter. 1 Open a Web browser, and then type the printer IP address in the address field.
Additional printer setup 44 Printing a network setup page If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration. 1 From the home screen, navigate to: > Reports > Network Setup Page 2 Check the first section of the network setup page, and confirm that the status is Connected.
Loading paper and specialty media 45 Loading paper and specialty media This chapter covers the selection and handling of paper and specialty media. Proper selection and loading of media can improve how reliably documents print. For more information, see “Avoiding jams” on page 240 and “Storing paper” on page 60.
Loading paper and specialty media 46 2 If the paper is longer than letter‑size paper, then squeeze and then slide the length guide at the back of the tray to extend it. 1 2 3 Squeeze, and then slide the length guide tab to the correct position for the size of the paper being loaded. 1 2 Note: Use the paper size indicators on the bottom of the tray to help position the guide.
Loading paper and specialty media 47 4 Squeeze, and then slide the width guide tab to the correct position for the size of the paper being loaded. 1 2 Note: Use the paper size indicators on the bottom of the tray to help position the guides. 5 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 6 Load the paper stack with the recommended printable side faceup.
Loading paper and specialty media 48 8 Insert the tray. 9 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray. Note: Mixing paper sizes or paper types in a tray may cause jams. Loading the manual feeder The standard 250‑sheet tray has an integrated manual feeder that can be used to print on different types of paper one sheet at a time.
Loading paper and specialty media 49 Loading the 650‑sheet duo tray The 650‑sheet duo tray (Tray 2) consists of a 550‑sheet tray and an integrated 100‑sheet multipurpose feeder. The tray is loaded in the same way as the 250‑sheet tray and the optional 550‑sheet tray, and supports the same paper types and sizes. The only differences are the look of the guide tabs and the location of the paper size indicators. CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately.
Loading paper and specialty media Loading the multipurpose feeder 1 Push the multipurpose feeder latch to the left. 2 Open the multipurpose feeder. 3 Pull the multipurpose feeder extender. Note: Guide the extender gently so that the multipurpose feeder is fully extended and open.
Loading paper and specialty media 51 4 Prepare the paper for loading. • Flex the sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. • Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface. Note: Avoid touching the printable side of transparencies. Be careful not to scratch them. • Flex a stack of envelopes back and forth to loosen them, and then fan them.
Loading paper and specialty media 5 52 Paper size indicator 6 Load the paper, and then adjust the width guide to lightly touch the edge of the paper stack. • Load paper, card stock, and transparencies with the recommended printable side facedown and the top edge entering the printer first. • Load envelopes with the flap side up and against the right side of the paper guide. Notes: • Do not load or close the multipurpose feeder while a job is printing. • Load only one size and type of paper at a time.
Loading paper and specialty media Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Paper Menu. 3 Change the paper size and type settings for the trays you are linking. • To link trays, make sure the paper size and type for the tray match that of the other tray.
Loading paper and specialty media 54 Assigning a custom paper type Using the Embedded Web Server Assign a custom paper type name to a tray when linking or unlinking trays. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly.
Paper and specialty media guide 55 Paper and specialty media guide Using specialty media Tips on using letterhead Use letterhead designed specifically for laser printers. Print a test page on the letterhead being considered for use before buying large quantities. Before loading letterhead, flex, fan, and straighten the stacks to prevent sheets from sticking together. Page orientation is important when printing on letterhead.
Paper and specialty media guide 56 Source Printing Printable side Paper orientation Manual feeder Two‑sided Faceup Load the sheet with the bottom edge entering the printer first. Multipurpose feeder One‑sided Facedown Load the sheet with the top edge entering the printer first. Multipurpose feeder Two‑sided Faceup Load the sheet with the bottom edge entering the printer first.
Paper and specialty media guide 57 Tips on using envelopes • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the envelopes loaded in the tray. • • • • • Print samples on the envelopes being considered for use before buying large quantities. Use envelopes designed specifically for laser printers. For best performance, use envelopes made from 90‑g/m2 (24‑lb) paper or 25% cotton. Use only new envelopes from undamaged packages.
Paper and specialty media guide 58 Tips on using card stock Card stock is heavy, single‑ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly affect print quality. • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the card stock loaded in the tray. • Print samples on the card stock being considered for use before buying large quantities.
Paper and specialty media guide 59 Moisture content The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance. Store paper in its original wrapper in the same environment as the printer for 24 to 48 hours before printing.
Paper and specialty media guide 60 • Do not mix paper sizes, types, or weights in the same tray; mixing results in jams. • Do not use coated papers unless they are specifically designed for electrophotographic printing. Selecting preprinted forms and letterhead Use these guidelines when selecting preprinted forms and letterhead: • Use grain long for 60–90‑g/m2 (16–24‑lb) paper. • Use only forms and letterhead printed using an offset lithographic or engraved printing process.
Paper and specialty media guide 61 • Store individual packages on a flat surface. • Do not store anything on top of individual paper packages. • Take paper out of the carton or wrapper only when you are ready to load it in the printer. The carton and wrapper help keep the paper clean, dry, and flat. Supported paper sizes, types, and weights This chapter provides information on standard and optional paper sources and the types of paper they support.
Paper and specialty media guide Paper size and dimension Standard 250‑sheet tray Executive 62 Manual feeder 650‑sheet duo tray 550‑sheet tray Multipurpose feeder 550‑sheet tray ADF Scanner glass Duplex mode X 1 1 1 1 1 1 1 1 X 1 1 1 1 X 184 x 267 mm (7.3 x 10.5 in.) Oficio (Mexico) 216 x 340 mm (8.5 x 13.4 in.) Folio 216 x 330 mm (8.5 x 13 in.) Statement X X 1 X X X 1,3 X X 140 x 216 mm (5.5 x 8.5 in.) Universal X 1,3 76 x 127 mm (3 x 5 in.) to 216 x 356 mm (8.
Paper and specialty media guide Paper size and dimension DL Envelope Standard 250‑sheet tray 63 Manual feeder 650‑sheet duo tray 550‑sheet tray Multipurpose feeder 550‑sheet tray ADF Scanner glass Duplex mode X X 1 X X X X X X 1 X X X X X X 1 X X X X X X 1 X X X X 110 x 220 mm (4.3 x 8.7 in.) C5 Envelope 162 x 229 mm (6.4 x 9 in.) B5 Envelope 176 x 250 mm (6.9 x 9.8 in.) Other Envelope 98 x 162 mm (3.9 x 6.3 in.) up to 176 x 250 mm (6.9 x 9.8 in.
Paper and specialty media guide Paper type 250‑sheet tray Manual feeder 64 650‑sheet duo tray 550‑sheet tray 550‑sheet tray ADF Scanner glass Duplex mode Multipurpose feeder Paper • • • • • • • • • • Plain Recycled Glossy Bond Letterhead Preprinted Colored Light Heavy Rough/Cott on • Custom Type [x] Card stock X Transparencie s X X X X Labels • Paper Envelope X X X X
Printing 65 Printing Printing forms Use the Forms and Favorites application to quickly and easily access frequently used forms or other information that is regularly printed. Before you can use this application, first set it up on the printer. For more information, see “Setting up Forms and Favorites” on page 20.
Printing 66 > Settings > Print Settings > Quality Menu > Print Mode > Black Only > Adjusting toner darkness Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly.
Printing 67 Using the printer control panel 1 From the home screen, navigate to: > Settings > Print Settings > Setup Menu 2 From the Printer Usage list, select Max Speed or Max Yield. 3 Touch Submit. Printing from a flash drive Printing from a flash drive Notes: • Before printing an encrypted PDF file, you will be prompted to type the file password from the printer control panel. • You cannot print files for which you do not have printing permissions. 1 Insert a flash drive into the USB port.
Printing 68 • If you insert the flash drive while the printer is processing other print jobs, then Busy appears on the printer display. After these print jobs are processed, you may need to view the held jobs list to print documents from the flash drive. Warning—Potential Damage: Do not touch the USB cable, any wireless network adapter, any connector, the memory device, or the printer in the areas shown while actively printing, reading, or writing from the memory device. Loss of data can occur.
Printing 69 Recommended flash drives File type • Lexar JumpDrive FireFly (512MB and 1GB) • SanDisk Cruzer Micro (512MB and 1GB) • Sony Micro Vault Classic (512MB and 1GB) Documents: • .pdf • .xps Images: • • • • • • • • .dcx .gif .jpeg or .jpg .bmp .pcx .tiff or .tif .png .
Printing 70 2 Touch . Printing confidential and other held jobs Note: Confidential and Verify print jobs are automatically deleted from memory after printing. Repeat and Reserve jobs are held in the printer until you delete them. For Windows users 1 With a document open, click File > Print. 2 Click Properties, Preferences, Options, or Setup. 3 Click Print and Hold. 4 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name.
Printing 71 • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Configuration > Other Settings tab > Security > Confidential Print Setup. 3 Modify the settings: • Set a maximum number of PIN entry attempts. When a user exceeds that number, all of the jobs for that user are deleted. • Set an expiration time for confidential print jobs. When a user has not printed the jobs within that time, all of the jobs for that user are deleted.
Printing In Windows 8 From the Search charm, type run, and then navigate to: Apps list > Run > type control printers > OK In Windows 7 or earlier a Click or click Start, and then click Run. b In the Start Search or Run dialog, type control printers. c Press Enter, or click OK. 2 Double‑click the printer icon. 3 Select the print job you want to cancel. 4 Click Delete.
Copying 73 Copying ADF Scanner glass Use the ADF for multiple‑page documents including two-sided (duplex) pages. Use the scanner glass for single-page documents, book pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). Making copies Making a quick copy 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Copying 74 • The ADF indicator light comes on when the paper is loaded properly. 2 Adjust the paper guides. 3 From the home screen, navigate to: Copy > specify the copy settings > Copy It Copying using the scanner glass 1 Place an original document facedown on the scanner glass in the upper left corner. 2 From the home screen, navigate to: Copy > specify the copy settings > Copy It If you have more pages to scan, then place the next document on the scanner glass, and then touch Scan the next page.
Copying 75 3 Navigate to: Copy to > select the tray that contains transparencies > Copy It If there are no trays that support transparencies, then navigate to: Manual Feeder > select the size of the transparencies > Transparency 4 Load transparencies into the multipurpose feeder, and then touch Copy It. Copying on letterhead 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Copying 76 Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides.
Copying 77 3 From the home screen, navigate to: Copy > Copy from > Mixed Sizes > Copy to > Auto Size Match > Copy It The scanner identifies the different paper sizes as they are scanned. Copies are printed on mixed paper sizes corresponding to the paper sizes of the original document. Example 2: Copying on a single paper size 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Copying 78 • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the home screen, touch Copy. 4 From the Scale area, touch or to enlarge or reduce your copies. Notes: • The factory default setting for Scale is Auto. • If you leave Scale set to Auto, then the content of your original document will be scaled to fit the size of the paper onto which you are copying.
Copying 79 • Newspaper—The original document is from a newspaper. • Other—The original document was printed using an alternate or unknown printer. 7 Touch > Copy It. Collating copies If you print multiple copies of a document, then you can choose to print the copies as a set (collated) or to print the copies as groups of pages (not collated). Collated Not collated 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Copying 80 • Between Pages • Off 5 Touch > Copy It. Copying multiple pages onto a single sheet In order to save paper, you can copy either two or four consecutive pages of a multiple‑page document onto a single sheet of paper. Notes: • Make sure to set the paper size to letter, legal, A4, or JIS B5. • Make sure to set the copy size to 100%. 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Copying 81 6 Select where you want to print the header or footer, and then touch 7 From the Header/Footer menu, touch . > Copy It. Placing an overlay message on each page 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
Copying 82 Understanding the copy options Copy from This option lets you select the paper size of the original document. • Touch the paper size that matches the original document. • To copy an original document that contains mixed paper sizes with the same width, touch Mixed Sizes. Copy to This option lets you select the size and type of paper on which your copies will be printed. • Touch the paper size and type that matches the paper loaded.
Copying 83 Content This option lets you set the original document type and source. Select from the following content types: • • • • Graphics—The original document is mostly business‑type graphics such as pie charts, bar charts, and animations. Photo—The original document is mostly a photo or an image. Text—The content of the original document is mostly text or line art. Text/Photo—The original document is a mixture of text, graphics, and photos.
Copying 84 Overlay This option lets you create a watermark (or message) that overlays the content of your copy. You can choose from Confidential, Copy, Draft, Urgent, and Custom. You can type a custom message in the ”Enter the Custom Text Overlay and press OK” field. The message will appear, faintly, in large print across each page. Cover Page Setup This option lets you set up the cover page of copies and booklets.
E-mailing 85 E-mailing ADF Scanner glass Use the ADF for multiple‑page documents including two-sided (duplex) pages. Use the scanner glass for single-page documents, book pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). You can use the printer to e‑mail scanned documents to one or more recipients. There are three ways to send an e‑mail from the printer.
E-mailing 86 Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings. 3 From the Other Settings column, click Manage Shortcuts > E-mail Shortcut Setup. 4 Type a unique name for the e‑mail recipient, and then type the e‑mail address.
E-mailing 87 • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. Note: To avoid a cropped image, make sure that the size of the original document and the copy paper size are the same. 3 From the home screen, navigate to: E-mail > Recipient(s) 4 Type the e‑mail address, or press # and then enter the shortcut number. To enter additional recipients, touch add.
E-mailing 88 4 Touch the name of the recipient. To search for additional recipients, touch New Search, and then type the name of the next recipient. 5 Touch > E‑mail It. Customizing e-mail settings Adding e-mail subject and message information 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray.
E-mailing 89 • JPEG—Use this to create and attach a separate file for each page of your original document, viewable by most Web browsers and graphics programs. • XPS—Use this to create a single XML Paper Specification (XPS) file with multiple pages, viewable using an Internet Explorer-hosted viewer and the .NET Framework, or by downloading a third‑party standalone viewer. 5 Touch > E‑mail It. Note: If you selected Secure PDF, then you will be prompted to enter your password twice.
E-mailing 90 Darkness This option lets you adjust how light or dark your scanned documents are in relation to the original document. Resolution This option lets you adjust the output quality of your e-mail. Increasing the image resolution increases the e-mail file size and the time needed to scan your original document. Decreasing the image resolution reduces the file size. Color This option lets you set the output to either color or monochrome for the scanned image.
E-mailing 91 Page Setup This option lets you change the following settings: • Sides (Duplex)—This specifies if the original document is printed on only one side or on both sides of the paper. This also identifies what needs to be scanned for inclusion in the e-mail. • Orientation—This specifies the orientation of the original document, and then changes the Sides (Duplex) and Binding settings to match the orientation.
Faxing 92 Faxing Automatic document feeder (ADF) Scanner glass Use the scanner glass for single-page documents, book pages, Use the ADF for multiple‑page documents including two- small items (such as postcards or photos), transparencies, photo sided (duplex) pages. paper, or thin media (such as magazine clippings). Setting up the printer to fax CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm.
Faxing 93 Initial fax setup Many countries and regions require outgoing faxes to contain the following information in a margin at the top or bottom of each transmitted page, or on the first page of the transmission: fax name (identification of the business, other entity, or individual sending the message) and fax number (telephone number of the sending fax machine, business, other entity, or individual). For more information, see “Regulatory notices for telecommunication terminal equipment” on page 327.
Faxing 94 4 In the Fax Number field, enter the printer fax number. 5 Click Submit. Choosing a fax connection Scenario 1: Standard telephone line Setup 1: Printer is connected to a dedicated fax line To connect: 1 Connect one end of the telephone cable that came with the printer to the port of the printer. 2 Connect the other end of the telephone cable to an active analog wall jack.
Faxing 95 Setup 2: Printer is sharing the line with an answering machine Connected to the same telephone wall jack PHONE LINE To connect: 1 Connect one end of the telephone cable that came with the printer to the 2 Connect the other end of the telephone cable to an active analog wall jack. 3 Connect the answering machine to the port of the printer. port of the printer.
Faxing 96 Connected to different wall jacks PHONE LINE To connect: 1 Connect one end of the telephone cable that came with the printer to the port of the printer. 2 Connect the other end of the telephone cable to an active analog wall jack. Tips for this setup: • If you have only one telephone number on your line, then you need to set the printer to receive faxes automatically (Auto Answer On). • Set the printer to pick up calls two rings after the answering machine.
Faxing 97 Setup 3: Printer is sharing the line with a telephone subscribed to voice mail service To connect: 1 Connect one end of the telephone cable that came with the printer to the port of the printer. 2 Connect the other end of the telephone cable to an active analog wall jack. 3 Connect the telephone to the port of the printer. Tips for this setup: • This setup works best if you subscribe to a distinctive ring service.
Faxing 98 Scenario 2: Digital Subscriber Line (DSL) A Digital Subscriber Line splits your regular telephone line into two channels: voice and Internet. Telephone and fax signals travel through the voice channel, and Internet signals pass through the other channel. This way, you can use the same line for analog voice calls (including faxes) and digital Internet access.
Faxing 99 Scenario 3: VoIP telephone service To connect: 1 Connect one end of the telephone cable that came with the printer to the port of the printer. 2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP adapter. Note: The port labeled Phone Line 2 or Fax Port is not always active. VoIP providers may charge additional cost for activation of the second phone port. 3 Connect the telephone to the port of the printer.
Faxing 100 Scenario 4: Digital telephone service through a cable provider Setup 1: Printer is connected directly to a cable modem 1 Connect one end of the telephone cable that came with your printer to the port of the printer. 2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the cable modem. Note: The port labeled Phone Line 2 or Fax Port is not always active. VoIP providers may charge additional cost for activation of the second phone port.
Faxing 101 • Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct splitter, plug an analog telephone into the splitter and then listen for a dial tone. Setup 2: Printer is connected to a wall jack; cable modem is installed elsewhere in the facility 1 Connect one end of the telephone cable that came with your printer to the port of the printer. 2 Connect the other end of the telephone cable to an active analog telephone wall jack.
Faxing 102 If the wall jack or equipment in your facility is not compatible with this type of connection, then you need to use a telephone adapter. An adapter for your country or region may not come with your printer, and you may need to purchase it separately. There may be an adapter plug installed in the port of the printer. If you are using a telephone adapter or a facility port of the printer.
Faxing 103 Connecting the printer to a non‑RJ‑11 wall jack LINE EXT 1 Connect one end of the telephone cable that came with printer to the port of the printer. 2 Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to the wall jack. 3 If you want to connect another device (telephone or answering machine) to the same wall jack, and if the device has a non‑RJ‑11 connector, then connect it directly to the telephone adapter.
Faxing 104 Connecting the printer to a wall jack in Germany The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines. The F port is for telephones. N F N Connect the printer to any of the N ports. N F N PHONE 1 Connect one end of the telephone cable that came the printer to the LINE port of the printer. 2 Connect the other end of the telephone cable to the RJ‑11 adapter, and then connect the adapter to an N port.
Faxing 105 3 If you want to connect a telephone and answering machine to the same wall jack, then connect the devices as shown. Note: Do not remove the adapter plug from the telephone system. port of the printer if you are connecting to a serial or cascaded Connecting to a distinctive ring service A distinctive ring service may be available from your telephone company. This service lets you have multiple telephone numbers on one telephone line, with each telephone number having a different ring pattern.
Faxing 106 4 In the Fax Number field, enter the printer fax number. 5 Click Submit. Setting the date and time You can set the date and time so that they are printed on every fax you send. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Faxing 107 • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the home screen, touch Fax. 4 From the printer control panel keypad, enter the fax number or the shortcut number. Note: To add recipients, touch search the address book. , and then enter the recipient's telephone number or shortcut number, or 5 Touch Fax It.
Faxing 108 Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the printer control panel, press #, and then enter the shortcut number using the keypad. 4 Touch Fax It.
Faxing 109 4 Specify the time the fax will be transmitted, and then touch . The time is increased or decreased in 30‑minute increments. 5 Touch Fax It. Note: The document is scanned and then faxed at the scheduled time. Creating shortcuts Creating a fax destination shortcut using the Embedded Web Server Assign a shortcut number to a single fax number or a group of fax numbers. 1 Open a Web browser, and then type the printer IP address in the address field.
Faxing 110 Customizing fax settings Changing the fax resolution 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides.
Faxing 111 Blocking junk faxes 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Fax Settings > Analog Fax Setup > Block No Name Fax.
Faxing 112 Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Fax Settings > Analog Fax Setup > Holding Faxes.
Faxing 113 Resolution This option lets you adjust the quality of the fax output. Increasing the image resolution increases the file size and the time needed to scan your original document. Decreasing the image resolution reduces the file size. Select one of the following: • • • • Standard—Use this when faxing most documents. Fine 200 dpi—Use this when faxing documents with small prints. Super fine 300 dpi—Use this when faxing documents with fine details.
Faxing 114 Transmission Log This option lets you print the transmission log or transmission error log. Edge Erase This option lets you remove smudges or any mark around the edges of a document. You can remove an equal area around all four sides of the paper, or you can pick a particular edge. Edge Erase also removes whatever is within the area selected, leaving nothing on that portion of the scan.
Scanning 115 Scanning Using Scan to Network Scan to Network lets you scan your documents to network destinations specified by your system support person. After the destinations (shared network folders) have been established on the network, the setup process for the application involves installing and configuring the application on the appropriate printer using its Embedded Web Server. For more information, see “Setting up Scan to Network” on page 23.
Scanning 116 Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Navigate to: Settings > Other Settings area > Manage Shortcuts > FTP Shortcut Setup 3 Enter the appropriate information. Note: A password may be required. If you do not have an ID and password, then contact your system support person.
Scanning 117 Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the printer control panel, press # on the keypad, and then enter the FTP shortcut number. 4 Touch Scan It.
Scanning 118 5 Type a scan name, and then a user name. Note: The scan name is the name that appears in the Scan Profile list on the display. 6 Click Submit. Note: Clicking Submit automatically assigns a shortcut number. You can use this shortcut number when you are ready to scan your documents. 7 Review the instructions on the Scan Profile screen. a Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Scanning 119 4 Click Next > Close. 5 Depending on your device, do either of the following:. • Press and hold the printer you want to configure. • Right‑click the printer you want to configure. 6 From the menu that appears, select Scan Properties or Properties, and then change the settings as necessary. 7 From the printer control panel, touch Scan to Computer and then select from the following options: • Scan—Scan and save the document directly to a selected location on the computer.
Scanning 120 Save As Shortcut This option lets you save the current settings as a shortcut by assigning a shortcut name. Note: Selecting this option automatically assigns the next available shortcut number. Original Size This option lets you set the paper size of the documents you are going to scan. When Original Size is set to Mixed Sizes, you can scan an original document that contains mixed paper sizes (letter‑ and legal‑size pages).
Scanning 121 Select from the following content sources: • • • • • • • • Black/White Laser—The original document was printed using a mono laser printer. Color Laser—The original document was printed using a color laser printer. Inkjet—The original document was printed using an inkjet printer. Magazine—The original document is from a magazine. Newspaper—The original document is from a newspaper. Other—The original document was printed using an alternate or unknown printer.
Understanding printer menus 122 Understanding printer menus Menus list Supplies Menu Paper Menu Reports Network/Ports Cyan Cartridge Magenta Cartridge Default Source Paper Size/Type Menu Settings Page Device Statistics Yellow Cartridge Substitute Size Network Setup Page Active NIC Standard Network or Network [x] Black Cartridge Paper Texture Network [x] Setup Page Standard USB Waste Toner Bottle Paper Weight Shortcut List SMTP Setup Maintenance Kit Paper Loading Fax Job Log Custom Ty
Understanding printer menus 123 Supplies menu Use To Cyan, Magenta, Yellow, or Black Toner Cartridge Nearly Low Low Very Low Replace Missing Defective Missing or Unresponsive Unsupported Invalid Region OK Non‑genuine Lexmark Cartridge Show the status of the cyan, magenta, yellow, or black toner cartridge. Black or Color Imaging Kit Nearly Low Low Very Low Replace Missing Defective Missing or Unresponsive Unsupported OK Non‑genuine Lexmark Imaging Kit Show the status of the black or color imaging kit.
Understanding printer menus 124 Paper menu Default Source menu Use To Default Source Tray [x] MP Feeder Manual Paper Manual Envelope Set a default paper source for all print jobs. Notes: • The 650‑sheet duo tray must be installed in order for MP Feeder to appear as a menu setting in the Paper menu. • Tray 1 (standard tray) is the factory default setting. • Only installed paper sources will appear as menu settings.
Understanding printer menus 125 Use To MP Feeder Size A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope Specify the paper size loaded in the multipurpose feeder.
Understanding printer menus 126 Use To Manual Paper Size A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal Specify the size of the paper being manually loaded. Manual Paper Type Plain Paper Card Stock Transparency Recycled Glossy Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x] Specify the paper type being manually loaded.
Understanding printer menus 127 Substitute Size menu Use To Substitute Size Off Statement/A5 Letter/A4 All Listed Substitute a specified paper size if the requested paper size is not available. Notes: • All Listed is the factory default setting. All available substitutions are allowed. • Off indicates that no size substitutions are allowed. • Setting a size substitution lets the print job continue without Change Paper appearing.
Understanding printer menus 128 Use To Bond Texture Smooth Normal Rough Specify the relative texture of the bond paper loaded. Envelope Texture Smooth Normal Rough Specify the relative texture of the envelopes loaded. Letterhead Texture Smooth Normal Rough Specify the relative texture of the letterhead loaded. Preprinted Texture Smooth Normal Rough Specify the relative texture of the preprinted paper loaded.
Understanding printer menus 129 Paper Weight menu Use To Plain Weight Light Normal Heavy Specify the relative weight of the plain paper loaded. Card Stock Weight Light Normal Heavy Specify the relative weight of the card stock loaded. Transparency Weight Light Normal Heavy Specify the relative weight of the transparencies loaded. Recycled Weight Light Normal Heavy Specify the relative weight of the recycled paper loaded.
Understanding printer menus 130 Use To Letterhead Weight Light Normal Heavy Specify the relative weight of the letterhead loaded. Preprinted Weight Light Normal Heavy Specify the relative weight of the preprinted paper loaded. Colored Weight Light Normal Heavy Specify the relative weight of the colored paper loaded. Light Weight Light Specify that the relative weight of the paper loaded is light. Heavy Weight Heavy Specify that the relative weight of the paper loaded is heavy.
Understanding printer menus 131 Use To Heavy Glossy Loading Off Determine and set two‑sided printing for all print jobs that specify Heavy Glossy as the paper type. Labels Loading Off Determine and set two‑sided printing for all print jobs that specify Labels as the paper type. Bond Loading Duplex Off Determine and set two‑sided printing for all print jobs that specify Bond as the paper type.
Understanding printer menus 132 Custom Types menu Use To Custom Type [x] Paper Card Stock Transparency Glossy Rough/Cotton Labels Envelope Associate a paper or specialty media type with a factory default Custom Type [x] name or a user‑defined custom name created in the Embedded Web Server or MarkVisionTM Professional. Recycled Paper Card Stock Transparency Glossy Rough/Cotton Labels Envelope Notes: • Paper is the factory default setting for Custom Type [x].
Understanding printer menus 133 Universal Setup menu Use To Units of Measure Inches Millimeters Specify the unit of measure. Portrait Width 3–8.5 inches 76–215.9 mm Set the width for portrait orientation. Note: Inches is the U.S. factory default setting. Millimeters is the international factory default setting. Notes: • If the width exceeds the maximum, then the printer uses the maximum width allowed. • 8.5 inches is the U.S. factory default setting. You can increase the width in 0.
Understanding printer menus 134 Use To Shortcut List Print a report containing information about configured shortcuts. Fax Job Log Print a report containing information about the last 200 completed faxes. Note: This menu item is available only when Enable Job Log is set to On in the Fax Settings menu. Fax Call Log Print a report containing information about the last 100 attempted, received, and blocked calls.
Understanding printer menus 135 Use To PCL SmartSwitch On Off Set the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language. Notes: • On is the factory default setting. • When Off is used, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.
Understanding printer menus 136 Use To Mac Binary PS On Off Auto Set the printer to process Macintosh binary PostScript print jobs. Standard Network Setup OR Network [x] Setup Reports Network Card TCP/IP IPv6 Wireless AppleTalk Display and set the printer network settings. Notes: • Auto is the factory default setting. • Off filters print jobs using the standard protocol. • On processes raw binary PostScript print jobs.
Understanding printer menus 137 Use To Job Timeout Set the amount of time it takes for a network print job to be canceled. 0, 10–225 seconds Notes: • 90 seconds is the factory default setting. • A setting value of 0 disables the timeout. • If a value between 1 and 9 is selected, then Invalid appears on the display, and the value is not saved.
Understanding printer menus 138 Use To WINS Server Address View or change the current WINS server address. Enable DDNS Yes No View or change the current DDNS setting. Enable mDNS Yes No View or change the current mDNS setting. DNS Server Address View or change the current DNS server address. Backup DNS Server Address View or change the backup DNS server addresses. Note: Yes is the factory default setting. Note: Yes is the factory default setting.
Understanding printer menus 139 To access the menu, navigate to: Network/Ports > Network [x] > Network [x] Setup > Wireless Use To Wi‑Fi Protected Setup Start Push Button Method Start PIN Method Establish a wireless network and enable network security. Notes: • Start Push Button Method connects the printer to a wireless network when buttons on both the printer and the access point (wireless router) are pressed within a given period of time.
Understanding printer menus 140 Use To View Address Show the assigned AppleTalk address. Note: The AppleTalk address can be changed only from the Embedded Web Server. Set Zone Provide a list of AppleTalk zones available on the network. [list of zones available on the network] Note: The default zone for the network is the factory default setting.
Understanding printer menus 141 Use To USB Buffer Disabled Auto 3K to [maximum size allowed] Set the size of the USB input buffer. Notes: • • • • Auto is the factory default setting. Disabled turns off job buffering. The USB buffer size value can be changed in 1-KB increments. The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
Understanding printer menus 142 Use To Use SSL Disabled Negotiate Required Set the printer to use SSL for increased security when connecting to the SMTP server. Notes: • Disabled is the factory default setting. • When the Negotiate setting is used, the SMTP server determines if SSL will be used. SMTP Server Authentication No authentication required Login/Plain CRAM‑MD5 Digest‑MD5 NTLM Kerberos 5 Specify the type of user authentication required for scan to e‑mail privileges.
Understanding printer menus 143 Security menu Miscellaneous Security Settings menu Use To Login Restrictions Login failures Failure time frame Lockout time Panel Login Timeout Remote Login Timeout Limit the number and time frames of failed login attempts from the printer control panel before all users are locked out. Notes: • “Login failures” specifies the number of failed login attempts before users are locked out. You can choose from 1 to 10 attempts. The factory default setting is 3.
Understanding printer menus 144 Use To Repeat Job Expiration Off 1 hour 4 hours 24 hours 1 week Set a time limit on how long the printer stores print jobs. Verify Job Expiration Off 1 hour 4 hours 24 hours 1 week Set a time limit on how long the printer stores print jobs needing verification. Reserve Job Expiration Off 1 hour 4 hours 24 hours 1 week Set a time limit on how long the printer stores print jobs for printing at a later time. Note: Off is the factory default setting.
Understanding printer menus 145 Security Audit Log menu Use To Export Log Let an authorized user export the security audit log. Note: The log can be downloaded from the Embedded Web Server and saved on a computer. Delete Log Yes No Specify whether audit logs are deleted. Configure Log Enable Audit Yes No Enable Remote Syslog No Yes Remote Syslog Facility 0–23 Severity of events to log 0–7 Specify how audit logs are configured. Note: Yes is the factory default setting.
Understanding printer menus 146 Settings menu General Settings menu Use To Display Language English Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Greek Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese Set the language of the text appearing on the printer display.
Understanding printer menus 147 Use To ADF Loaded Beep Enabled Disabled Specify a custom beep when paper is loaded in the ADF. Quiet Mode Off On Reduce the amount of noise produced by the printer. Note: Enabled is the factory default setting. Notes: • Off is the factory default setting. This supports the performance specifications for your printer. • On configures the printer to produce as little noise as possible. This is best suited for printing text and line art.
Understanding printer menus 148 Use To Keyboard Keyboard Type English Francais Francais Canadien Deutsch Italiano Espanol Greek Dansk Norsk Nederlands Svenska Suomi Portuguese Russian Polski Swiss German Swiss French Korean Magyar Turkce Cesky Simplified Chinese Traditional Chinese Japanese Custom Key [x] Specify a language and custom key information for the printer keyboard. Paper Sizes U.S. Metric Specify the default system of measurement for paper sizes. Notes: • U.S.
Understanding printer menus 149 Use To Displayed Information Left side Right side Custom Text [x] [text entry] Specify what is displayed on the upper left and right corners of the home screen. For the “Left side” and “Right side” menus, select from the following options: None IP Address Hostname Contact Name Location Date/Time mDNS/DDNS Service Name Zero Configuration Name Cartridge Level Custom Text [x] Notes: • IP Address is the factory default setting for “Left side.
Understanding printer menus 150 Use To Displayed Information (continued) Waste Toner Bottle Paper Jam Load Paper Service Errors Specify the displayed information for Waste Toner Bottle, Paper Jam, Load Paper, and Service Errors settings. Select from the following options: Display Yes No Message to display Default Alternate Default [text entry] Alternate [text entry] Notes: • No is the factory default setting for Activate. • Default is the factory default setting for “Type of Message to Display”.
Understanding printer menus 151 Use To Time Format 12 hour A.M./P.M. 24 hour clock Format the printer time. Screen Brightness 20–100 Specify the brightness of the printer control panel screen. One Page Copy Off On Set copies from the scanner glass to only one page at a time. Audio Feedback Button Feedback On Off Set the audio volume for the buttons. Volume 1–10 Show Bookmarks Yes No Note: “12 hour A.M./P.M.” is the factory default setting. Note: 100 is the factory default setting.
Understanding printer menus 152 Use To Contact Name Specify a contact name for the printer. Note: The contact name is stored on the Embedded Web Server. Location Specify the location of the printer. Note: The location is stored on the Embedded Web Server. Alarms Alarm Control Cartridge Alarm Set an alarm when the printer requires operator intervention.
Understanding printer menus 153 Use To Timeouts Hibernate Timeout on Connection Hibernate Do Not Hibernate Set the printer to follow the setting of “Hibernate Timeout” even when an active Ethernet or fax connection exists. Notes: • Do Not Hibernate is the factory default setting. • If “Hibernate Timeout on Connection” is set to Do Not Hibernate, then the device never automatically hibernates.
Understanding printer menus 154 Use To Timeouts Job Hold Timeout 5–255 Set the amount of time in seconds the printer waits for user intervention before it holds jobs that require unavailable resources and continues to print other jobs in the print queue. Notes: • 30 is the factory default setting. • This menu item appears only when a formatted, working printer hard disk is installed.
Understanding printer menus 155 Use To Press Sleep Button Do Nothing Sleep Hibernate Determine how the printer, while in idle state, reacts to a short press of the Sleep button. Notes: • Sleep is the factory default setting. • Do Nothing ignores any Sleep button presses regardless of duration. Press and Hold Sleep Button Do Nothing Sleep Hibernate Determine how the printer, while in idle state, reacts to a long press of the Sleep button.
Understanding printer menus 156 Use To Allow color copies On Off Enable color in copies. Sides (Duplex) 1 sided to 1 sided 1 sided to 2 sided 2 sided to 1 sided 2 sided to 2 sided Specify whether an original document is two‑sided (duplex) or one‑sided, and then specify whether the copy should be two‑sided or one‑sided. Notes: • On is the factory default setting. • Setting this to Off hides all color‑specific menus. • This setting overrides the Color setting.
Understanding printer menus 157 Use To Original Size Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in. ID Card Specify the paper size of the original document. Copy To Source Tray [x] Manual Feeder Multipurpose Feeder Specify the paper source for copy jobs. Transparency Separators On Off Place a sheet of paper between transparencies.
Understanding printer menus 158 Use To Header/Footer [Location] Off Date/Time Page number Custom text Print on All pages First page only All but first page Custom text Specify header and footer information and its location on the page. Select from the following location options: • • • • • • Top left Top middle Top right Bottom left Bottom middle Bottom right Notes: • Off is the factory default setting for the location. • “All pages” is the factory default setting for “Print on.
Understanding printer menus 159 Use To Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specify which color to drop during copies, and how much the dropout is increased or decreased. Contrast 0–5 Best for content Specify the contrast used for the copy job. Mirror Image Off On Create a mirror image of the original document. Negative Image Off On Create a negative image of the original document.
Understanding printer menus 160 Fax Settings menu Fax Mode (Analog Fax Setup) menu Analog Fax Setup mode sends the fax job through a telephone line. General Fax Settings Use To Fax Name Specify the name of the fax in the printer. Fax Number Specify the telephone number assigned to the fax. Fax ID Fax Name Fax Number Specify how the fax is identified. Enable Manual Fax On Off Set the printer to fax manually, which requires a line splitter and a telephone handset.
Understanding printer menus 161 Use To Fax Cover Page Fax Cover Page Off by default On by default Never use Always use Include to Field On Off Include from Field On Off From Include Message Field On Off Message Include Logo On Off Include Footer [x] On Off Footer [x] Configure the fax cover page. Note: “Off by default” is the factory default setting for all Fax Cover Page options. Fax Send Settings Use To Resolution Standard Fine 200 dpi Super Fine 300 dpi Specify quality in dots per inch (dpi).
Understanding printer menus 162 Use To Original Size Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in. Specify the paper size of the original document. Sides (Duplex) Off Long edge Short edge Specify how text and graphics are oriented on a page. Notes: • Mixed Sizes is the U.S. factory default setting. A4 is the international factory default setting.
Understanding printer menus 163 Use To Dialing Prefix Rules Prefix Rule [x] Establish a dialing prefix rule. Automatic Redial 0–9 Specify the number of times the printer tries to send the fax to a specified number. Redial frequency 1–200 Specify the number of minutes between redials. Behind a PABX Yes No Enable or disable switchboard blind dialing without a dial tone. Enable ECM Yes No Enable or disable Error Correction Mode for fax jobs.
Understanding printer menus 164 Use To Background Removal ‑4 to 4 Adjust the amount of background visible on a scanned image. Color Balance Cyan - Red Magenta - Green Yellow - Blue Enable an equal balance of colors in the scanned image. Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specify which color to drop, and how much the dropout is increased or decreased.
Understanding printer menus 165 Use To Temperature ‑4 to 4 Specify “warm” or “cool” outputs. Notes: • 0 is the factory default setting. • “Cool” values generate a bluer output than the default while “warm” values generate a redder output than the default. Enable Color Fax Scans Off by default On by default Never use Always use Enable color faxing. Note: “Off by default” is the factory default setting. Auto Convert Color Faxes to Mono Convert all outgoing faxes to black and white.
Understanding printer menus 166 Use To Paper Source Auto Tray [x] Manual Feeder Multipurpose Feeder Specify the paper source for printing incoming fax jobs. Sides (Duplex) Off On Enable two‑sided (duplex) printing for incoming fax jobs. Separator Sheets Off Before Job After Job Enable the printer to include separator sheets for incoming fax jobs. Separator Sheet Source Tray [x] Manual Feeder Specify where the printer picks the separator sheet.
Understanding printer menus 167 Use To Holding Faxes Held Fax Mode Off Always On Manual Scheduled Fax Holding Schedule Enable fax holding all of the time or according to set schedule. Enable Color Fax Receive On Off Enable the printer to receive fax in color. Note: Off is the factory default setting. Note: On is the factory default setting. Fax Log Settings Use To Transmission Log Print log Do not print log Print only for error Enable printing of a transmission log after each fax job.
Understanding printer menus 168 Speaker Settings Use To Speaker Mode Always Off On until Connected Always On Specify the mode of the speaker. Notes: • “On until Connected” is the factory default setting. A sound is issued until the fax connection is made. • Always On turns the speaker on. • Always Off turns the speaker off. Speaker Volume High Low Control the volume setting. Ringer Volume Off On Control the fax speaker ringer volume. Note: High is the factory default setting.
Understanding printer menus 169 Use To Content Type Text Graphics Text/Photo Photo Specify the content of the original document. Content Source Black/White Laser Color Laser Inkjet Photo/Film Magazine Newspaper Press Other Specify how the content was originally produced. Fax Resolution Standard Fine 200 dpi Super Fine 300 dpi Specify the resolution level for scanning to fax. Darkness 1–9 Adjust the darkness of the output.
Understanding printer menus 170 Use To Use Multi‑Page TIFF On Off Provide a choice between single‑page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑fax job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the scan job. Notes: • On is the factory default setting. • This menu item applies to all scan functions. Enable Analog Receive Off On Enable receiving of analog faxes.
Understanding printer menus 171 Use To Format PDF (.pdf) Secure PDF TIFF (.tif) JPEG (.jpg) XPS (.xps) Specify the format of the scanned file. PDF Version 1.2–1.6 A–1a Set the version of the PDF file to be scanned for e‑mailing. Content Type Text Graphics Text/Photo Photo Specify the content of the original document. Content Source Black/White Laser Color Laser Inkjet Photo/Film Magazine Newspaper Press Other Specify how the original document was produced.
Understanding printer menus 172 Use To Original Size Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in. Specify the paper size of the document being scanned. Sides (Duplex) Off Long edge Short edge Specify how the text and graphics are oriented on the page. Notes: • Letter is the U.S. factory default setting. A4 is the international factory default setting.
Understanding printer menus 173 Use To E‑mail images sent as Attachment Web Link Specify how images are sent. Use Multi‑Page TIFF On Off Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑e-mail job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job. Note: Attachment is the factory default setting. Notes: • On is the factory default setting.
Understanding printer menus 174 Use To Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specify which color to drop during scanning, and how much to increase or decrease the dropout. Contrast 0–5 Best for content Specify the contrast of the output. Mirror Image Off On Create a mirror image of the original document. Negative Image Off On Create a negative image of the original document.
Understanding printer menus 175 FTP Settings menu Use To Format PDF (.pdf) Secure PDF (.pdf) TIFF (.tif) JPEG (.jpg) XPS (.xps) Specify the format of the file for FTP sending. PDF Version 1.2–1.6 A–1a Set the version level of the PDF file for FTP sending. Content Type Text Graphics Text/Photo Photo Specify the content of the original document. Content Source Black/White Laser Color Laser Inkjet Photo/Film Magazine Newspaper Press Other Specify how the original document was produced.
Understanding printer menus 176 Use To Original Size Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in. Specify the paper size of the original document. Sides (Duplex) Off Long edge Short edge Specify how the text and graphics are oriented on the page. Notes: • Letter is the U.S. factory default setting. A4 is the international factory default setting.
Understanding printer menus 177 Use To Use Multi‑Page TIFF On Off Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑FTP job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job. Notes: • On is the factory default setting. • This menu item applies to all scan functions.
Understanding printer menus 178 Use To Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specify which color to drop during scanning, and how much to increase or decrease the dropout. Contrast 0–5 Best for content Specify the contrast of the output. Mirror Image Off On Create a mirror image of the original document. Negative Image Off On Create a negative image of the original document.
Understanding printer menus 179 Flash Drive menu Scan Settings menu Use To Format PDF (.pdf) Secure PDF TIFF (.tif) JPEG (.jpg) XPS (.xps) Specify the format of the file to be sent through FTP. PDF Version 1.2–1.6 A1‑a Set the version of the PDF file to be sent through FTP. Content Type Text Graphics Text/Photo Photo Specify the content of the original document.
Understanding printer menus 180 Use To Original Size Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in. Specify the paper size of the original document. Sides (Duplex) Off Long edge Short edge Specify how the text and graphics are oriented on a page. Notes: • Letter is the U.S. factory default setting. A4 is the international factory default setting.
Understanding printer menus 181 Use To Use Multi‑Page TIFF On Off Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑FTP job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page. Notes: • On is the factory default setting. • This menu item applies to all scan functions.
Understanding printer menus 182 Use To Contrast 0–5 Best for content Specify the contrast of the output. Mirror Image Off On Create a mirror image of the original document. Negative Image Off On Create a negative image of the original document. Shadow Detail ‑4 to 4 Adjust the amount of shadow detail visible on a scanned image. ADF Skew Fix Auto Off On Correct the slight skew in the scanned image. Scan edge to edge Off On Allow edge-to-edge scanning of the original document.
Understanding printer menus 183 Use To Collate (1,1,1) (2,2,2) (1,2,3) (1,2,3) Stack the pages of a print job in sequence when printing multiple copies. Sides (Duplex) 1 sided 2 sided Specify whether prints are on one side or on both sides of the page. Duplex Binding Long Edge Short Edge Define binding for duplexed pages in relation to page orientation. Note: “(1,2,3) (1,2,3)” is the factory default setting. Note: “1 sided” is the factory default setting.
Understanding printer menus Use 184 To Separator Sheet Source Specify the paper source for separator sheets. Tray [x] Note: Tray 1 is the factory default setting. Manual Feeder Blank Pages Do Not Print Print Specify whether blank pages are inserted in a print job. Note: Do Not Print is the factory default setting. Print Settings Setup menu Use To Printer Language PCL Emulation PS Emulation Set the default printer language. Notes: • PS Emulation is the factory default printer language.
Understanding printer menus 185 Use To Download Target RAM Flash Disk Set the storage location for downloads. Notes: • RAM is the factory default setting. Storing downloads in the RAM is temporary. • Storing downloads in flash memory or on a printer hard disk places them in permanent storage. Downloads remain in flash memory or on the printer hard disk even when the printer is turned off. • This menu item appears only when a flash drive or a formatted, working printer hard disk is installed.
Understanding printer menus 186 Use To Copies 1–999 Specify the default number of copies for each print job. Blank Pages Do Not Print Print Specify whether blank pages are inserted in a print job. Collate (1,1,1) (2,2,2) (1,2,3) (1,2,3) Stack the pages of a print job in sequence when printing multiple copies. Separator Sheets Off Between Copies Between Jobs Between Pages Specify whether blank separator sheets are inserted. Note: 1 is the factory default setting.
Understanding printer menus 187 Use To Paper Saver Border None Solid Print a border when using Paper Saver. Note: None is the factory default setting. Quality menu Use To Print Mode Color Black Only Specify whether images are printed in black and white or in color. Color Correction Auto Off Manual Adjust the color output on the printed page. Notes: • Color is the factory default setting. • The printer driver is capable of overriding this setting. Notes: • Auto is the factory default setting.
Understanding printer menus 188 Use To Color Saver On Off Reduce the amount of toner used for graphics and images. The amount of toner used for text is not reduced. Notes: • Off is the factory default setting. • On overrides Toner Darkness settings. RGB Brightness ‑6 to 6 Adjust the printed output either by lightening or darkening it. You can conserve toner by lightening the output. Note: 0 is the factory default setting. RGB Contrast 0–5 Adjust the contrast of printed objects.
Understanding printer menus 189 Use To Manual Color RGB Image RGB Text RGB Graphics Customize the RGB color conversions. Select from the following options: Vivid sRGB Display Display—True Black sRGB Vivid Off Notes: • sRGB Display is the factory default setting for RGB Image. This applies a color conversion table to an output that matches the colors displayed on a computer monitor. • sRGB Vivid is the factory default setting for RGB Text and RGB Graphics.
Understanding printer menus 190 Job Accounting menu Note: This menu appears only when a formatted, non-defective printer hard disk is installed. Make sure the printer hard disk is not read/write‑ or write‑protected. Use To Job Accounting Log Off On Determine and set if the printer creates a log of the print jobs it receives. Job Accounting Utilities Print and delete log files or export them to a flash drive. Accounting Log Frequency Weekly Monthly Determine and set how often a log file is created.
Understanding printer menus 191 Use To E‑mail to Send Logs Specify the e‑mail address to which the device sends job accounting logs. Log File Prefix Specify the prefix you want for the log file name. Note: The current host name defined in the TCP/IP menu is used as the default log file prefix. Utilities menu Use To Remove Held Jobs Confidential Held Not Restored All Delete confidential and held jobs from the printer hard disk.
Understanding printer menus 192 Use To Coverage Estimator Off On Provide an estimate of the percentage coverage of toner on a page. The estimate is printed on a separate page at the end of each print job. Note: Off is the factory default setting. XPS menu Use To Print Error Pages Off On Print a page containing information on errors, including XML markup errors. Note: Off is the factory default setting. PDF menu Use To Scale to Fit Yes No Scale page content to fit the selected paper size.
Understanding printer menus 193 Use To Image Smoothing On Off Enhance the contrast and sharpness of low‑resolution images and smoothen their color transitions. Notes: • Off is the factory default setting. • Image Smoothing has no effect on images that are 300 dpi or higher in resolution. PCL Emul menu Use To Font Source Resident Disk Download Flash All Specify the set of fonts used by the Font Name menu. Notes: • “Resident” is the factory default setting.
Understanding printer menus 194 Use To PCL Emulation Settings Pitch 0.08–100 Specify the font pitch for scalable monospaced fonts. PCL Emulation Settings Orientation Portrait Landscape Notes: • • • • 10 is the factory default setting. Pitch refers to the number of fixed‑space characters per inch (cpi). Pitch can be increased or decreased in 0.01‑cpi increments. For nonscalable monospaced fonts, the pitch appears on the display but it cannot be changed.
Understanding printer menus 195 Use To Tray Renumber Assign MP Feeder Off None 0–199 Assign Tray [x] Off None 0–199 Assign Manual Paper Off None 0–199 Assign Manual Env Off None 0–199 Configure the printer to work with printer software or programs that use different source assignments for trays and feeders.
Understanding printer menus 196 HTML menu Use Font Name Albertus MT Antique Olive Apple Chancery Arial MT Avant Garde Bodoni Bookman Chicago Clarendon Cooper Black Copperplate Coronet Courier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text Intl CG Times Intl Courier Intl Univers To Joanna MT Letter Gothic Lubalin Graph Marigold MonaLisa Recut Monaco New CenturySbk New York Optima Oxford Palatino StempelGaramond Taffy Times TimesNewRoman Univers Zapf Chancery NewSansMTCS NewSansMTCT New S
Understanding printer menus 197 Use To Margin Size 8–255 mm Set the page margin for HTML documents. Notes: • 19 mm is the factory default setting. • Margin size can be increased in 1‑mm increments. Backgrounds Do Not Print Print Specify whether to print backgrounds on HTML documents. Note: Print is the factory default setting. Image menu Use To Auto Fit On Off Select the optimal paper size, scaling, and orientation. Invert On Off Invert bitonal monochrome images.
Understanding printer menus 198 Menu item Description Print All Guides Prints all the guides Copy Guide Provides information about making copies and changing settings E‑mail Guide Provides information about sending e‑mails using addresses, shortcut numbers, or the address book, and about changing settings Fax Guide Provides information about sending faxes using fax numbers, shortcut numbers, or the address book, and about changing settings FTP Guide Provides information about scanning documents
Saving money and the environment 199 Saving money and the environment Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see: • The Notices chapter • The Environmental Sustainability section of the Lexmark Web site at www.lexmark.
Saving money and the environment 200 Avoid paper jams Carefully select and load paper to avoid paper jams. For more information, see “Avoiding jams” on page 240. Saving energy Using Eco‑Mode 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Saving money and the environment 201 Use To On Reduce printer noise. Notes: • Print jobs are processed at a reduced speed. • Printer engine motors do not start until a document is ready to print. There will be a short delay before the first page is printed. Off Use factory default settings. Note: This setting supports the performance specifications of the printer. 3 Click Submit. Adjusting Sleep mode To save energy, decrease the number of minutes the printer waits before it enters Sleep mode.
Saving money and the environment 202 Using Hibernate Mode Hibernate is an ultra‑low power operating mode. When operating in Hibernate mode, the printer is essentially off, and all other systems and devices are powered down safely. Note: The Hibernate and Sleep modes can be scheduled. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen.
Saving money and the environment 203 Using the printer control panel 1 From the printer control panel, navigate to: > Settings > General Settings > Timeouts > Hibernate Timeout 2 Select the amount of time the printer waits after a print job is processed before it enters Hibernate mode. 3 Touch . Using Schedule Power Modes Schedule Power Modes lets you schedule when the printer goes into a reduced power state or into Ready state.
Saving money and the environment 204 Using the printer control panel 1 From the home screen, navigate to: > Settings > General Settings > Screen Brightness 2 In the Screen Brightness field, enter the brightness percentage you want for the display. 3 Touch . Recycling Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see: • The Notices chapter • The Environmental Sustainability section of the Lexmark Web site at www.lexmark.
Saving money and the environment 205 To return Lexmark cartridges for reuse or recycling, follow the instructions that came with your printer or cartridge and use the prepaid shipping label. You can also do the following: 1 Go to www.lexmark.com/recycle. 2 From the Toner Cartridges section, select your country or region. 3 Follow the instructions on the computer screen.
Securing the printer 206 Securing the printer Using the security lock feature The printer is equipped with a security lock feature. Attach a security lock compatible with most laptop computers in the location shown to secure the printer in place. Statement of Volatility Your printer contains various types of memory that can store device and network settings, and user data.
Securing the printer • • • • 207 The printer is being moved to a different department or location. The printer is being serviced by someone from outside your organization. The printer is being removed from your premises for service. The printer is being sold to another organization. Disposing of a printer hard disk Note: Some printer models may not have a printer hard disk installed.
Securing the printer 208 Erasing printer hard disk memory Note: Some printer models may not have a printer hard disk installed. Configuring Disk Wiping in the printer menus lets you remove residual confidential material left by print jobs by securely overwriting files that have been marked for deletion. Using the printer control panel 1 Turn off the printer. 2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.
Securing the printer 209 Notes: • Enabling disk encryption will erase the contents of the printer hard disk. • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks. 4 Click Submit. Using the printer control panel 1 Turn off the printer. 2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.
Maintaining the printer 210 Maintaining the printer Periodically, certain tasks are required to maintain optimum print quality. Storing supplies Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.
Maintaining the printer Cleaning the scanner glass Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images. 1 Slightly dampen a soft, lint-free cloth or paper towel with water. 2 Open the scanner cover. 3 Clean all the areas shown, and then let them dry. 1 White underside of the ADF cover 2 White underside of the scanner cover 3 Scanner glass 4 ADF glass 4 Close the scanner cover.
Maintaining the printer 212 Checking the status of parts and supplies Checking the status of parts and supplies on the printer control panel From the home screen, navigate to: Status/Supplies > View Supplies Checking the status of parts and supplies from the Embedded Web Server Note: Make sure the computer and the printer are connected to the same network. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the home screen.
Maintaining the printer 213 Ordering supplies To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web site at www.lexmark.com or contact the place where you purchased the printer. Note: All life estimates for printer supplies assume printing on letter‑ or A4‑size plain paper.
Maintaining the printer 214 Item United States and Canada European Union (EU), European Economic Area (EEA), and Switzerland Rest of the world Magenta 801HM 802HM 808HM Yellow 801HY 802HY 808HY For more information on countries located in each region, visit www.lexmark.com/regions.
Maintaining the printer 215 Ordering a waste toner bottle Item Waste toner bottle All countries and regions C540X75G Replacing supplies Replacing the waste toner bottle 1 Top door 2 Waste toner bottle 3 Right side cover 4 Front door 1 Unpack the replacement waste toner bottle. 2 Open the front door. CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching.
Maintaining the printer 3 Open the top door. 4 Remove the right side cover.
Maintaining the printer 5 Press the green levers on each side of the waste toner bottle, and then remove the waste toner bottle. 6 Seal the used waste toner bottle in the enclosed packaging. For more information, see “Recycling Lexmark products” on page 204. 7 Insert the replacement waste toner bottle.
Maintaining the printer 8 Insert the right side cover. 9 Slide and hold the release latch on the right side of the printer, and then slowly close the top door. 10 Close the front door.
Maintaining the printer Replacing a black and color imaging kit 1 Open the front door. CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 2 Open the top door.
Maintaining the printer 3 Remove the toner cartridges by lifting the handles, and then gently pulling them away from the imaging kit. 4 Remove the right side cover. 5 Press the green levers on each side of the waste toner bottle, and then remove the waste toner bottle.
Maintaining the printer 6 Lift the blue levers on the imaging kit, and then pull the imaging kit until it stops. 7 Press down the blue lever, and then grasp the green handles on the sides to pull out the imaging kit. 8 Unpack the replacement black and color imaging kit. Notes: • The color imaging kit includes the imaging kit and the cyan, magenta, yellow, and black developer units. • The black imaging kit includes the imaging kit and the black developer unit.
Maintaining the printer 222 For more information, see “Recycling Lexmark products” on page 204. Note: When replacing the black imaging kit, save the cyan, magenta, and yellow developer units. Dispose only the black developer unit. 10 Gently shake the yellow, cyan, magenta, and black developer units side‑to‑side. 11 Remove the red packing strip and the attached fabric from the developer units.
Maintaining the printer 223 12 Gently insert the yellow, cyan, magenta, and black developer units. Note: Make sure each developer unit is inserted into the matching color slot. 13 Remove the red packing strip from the imaging kit. Warning—Potential Damage: Do not touch the shiny photoconductor drum under the imaging kit. Doing so may affect the quality of future print jobs.
Maintaining the printer 14 Align and then insert the imaging kit. 15 Gently but firmly push the blue levers down until the imaging kit fits into place. Note: Make sure that the imaging kit is fully seated. 16 Insert the waste toner bottle.
Maintaining the printer 17 Insert the right side cover. 18 Insert the toner cartridges. 19 Slide and hold the release latch on the right side of the printer, and then slowly close the top door.
Maintaining the printer 20 Close the front door. Replacing toner cartridges Warning—Potential Damage: Damage caused by use of a non‑Lexmark toner cartridge is not covered under warranty. Note: A reduced print quality may result from using non‑Lexmark toner cartridges. 1 Open the top door.
Maintaining the printer 2 Remove the toner cartridge by lifting the handle, and then gently pulling it away from the imaging kit. 3 Unpack the new toner cartridge, and then remove its packaging. 4 Align the new toner cartridge, and then press the cartridge down until it fits into place.
Maintaining the printer 5 Slide and hold the release latch on the right side of the printer, and then slowly close the top door. 6 Seal the used toner cartridge in the bag that the replacement toner cartridge came in. For more information, see “Recycling Lexmark products” on page 204. Replacing a developer unit Replace the developer unit when a print quality defect occurs or when damage occurs to the printer. 1 Open the front door. CAUTION—HOT SURFACE: The inside of the printer might be hot.
Maintaining the printer 2 Open the top door. 3 Lift the toner cartridge handle, and then gently pull it from the imaging kit.
Maintaining the printer 4 Remove the right side cover. 5 Press the green levers on each side of the waste toner bottle, and then remove the waste toner bottle. 6 Lift the blue levers on the imaging kit, and then pull the imaging kit until it stops.
Maintaining the printer 7 Press down the blue lever, and then grasp the green handles on the sides to pull out the imaging kit. Warning—Potential Damage: Do not touch the underside of the imaging kit. Doing so could damage the imaging kit. 8 Remove the used developer unit. 9 Gently shake the replacement developer unit side‑to‑side before removing it from its packaging.
Maintaining the printer 10 Remove the red shipping cover from the developer unit. 11 Insert the developer unit. 12 Align and then insert the imaging kit.
Maintaining the printer 13 Gently but firmly push the blue levers down until the imaging kit fits into place. Note: Make sure that the imaging kit is fully seated. 14 Replace the waste toner bottle. 15 Insert the right side cover.
Maintaining the printer 16 Insert the toner cartridges. 17 Slide and hold the release latch on the right side of the printer, and then slowly close the top door. 18 Close the front door. 19 Seal the used developer unit in the bag that the replacement developer unit came in. For more information, see “Recycling Lexmark products” on page 204.
Maintaining the printer 235 Moving the printer Before moving the printer CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage: • Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet. • Disconnect all cords and cables from the printer before moving it.
Managing the printer 236 Managing the printer Finding advanced networking and administrator information This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server Administrator's Guide on the Lexmark Web site at http://support.lexmark.com. Checking the virtual display 1 Open a Web browser, and then type the printer IP address in the address field.
Managing the printer 237 Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Reports, and then click the type of report you want to view.
Managing the printer 238 Modifying confidential print settings Note: This feature is available only in network printers or printers connected to print servers. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Managing the printer 239 If you want a more comprehensive method of restoring the printer factory default settings, then perform the Wipe All Settings option. For more information, see “Erasing non‑volatile memory” on page 207. Warning—Potential Damage: Restoring factory defaults returns most printer settings to the original factory default settings. Exceptions include the display language, custom sizes and messages, and network/port menu settings. All downloads stored in the RAM are deleted.
Clearing jams 240 Clearing jams Avoiding jams Load paper properly • Make sure paper lies flat in the tray. Correct loading of paper • • • • Incorrect loading of paper Do not remove a tray while the printer is printing. Do not load a tray while the printer is printing. Load it before printing, or wait for a prompt to load it. Do not load too much paper. Make sure the stack height is below the maximum paper fill indicator. Do not slide the paper into the tray. Load paper as shown in the illustration.
Clearing jams 241 • Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing tightly against the paper or envelopes. • Push the tray firmly into the printer after loading paper. Use recommended paper • Use only recommended paper or specialty media. • Do not load wrinkled, creased, damp, bent, or curled paper. • Flex, fan, and straighten paper before loading it. • • • • Do not use paper that has been cut or trimmed by hand.
Clearing jams 242 Jam location Message on the display What to do 3 Fuser [x]‑page jam, open front door to clear Open the front door, then pull the tab and hold the fuser [202.xx] fuser cover down, and then remove the jammed paper. 4 Front door [x]‑page jam, open front door [20y.xx] Open the front door, and then remove the jammed paper. 5 Duplex area [x]‑page jam, open front door to clear Open the front door, and then remove the jammed duplex [23y.xx] paper.
Clearing jams 243 3 Open the front door. CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. a If there is a jammed paper under the fuser, then firmly grasp the paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed.
Clearing jams b Pull the green lever to open the fuser cover. c If there is a jammed paper in the fuser, then hold down the fuser cover, and then remove the paper. Note: Make sure all paper fragments are removed.
Clearing jams 245 4 Slide and hold the release latch on the right side of the printer, and then slowly close the top door. 5 Close the front door. 6 From the printer control panel, touch to clear the message and continue printing. For non‑touch‑screen printer models, select Next > Clear the jam, press OK, and then press to confirm. [x]-page jam, open front door to clear fuser [202.xx] 1 Open the front door. CAUTION—HOT SURFACE: The inside of the printer might be hot.
Clearing jams 2 Open the top door.
Clearing jams 3 Pull the green lever to open the fuser cover. 4 Hold down the fuser cover, and then remove the jammed paper. Note: Make sure all paper fragments are removed.
Clearing jams 248 5 Slide and hold the release latch on the right side of the printer, and then slowly close the top door. 6 Close the front door. 7 From the printer control panel, touch to clear the message and continue printing. For non‑touch‑screen printer models, select Next > Clear the jam, press OK, and then press to confirm. [x]-page jam, open front door [20y.xx] 1 Open the front door. CAUTION—HOT SURFACE: The inside of the printer might be hot.
Clearing jams 249 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 3 Close the front door. 4 From the printer control panel, touch to clear the message and continue printing. For non‑touch‑screen printer models, select Next > Clear the jam, press OK, and then press to confirm. [x]‑page jam, open front door to clear duplex [23y.xx] 1 Open the front door. CAUTION—HOT SURFACE: The inside of the printer might be hot.
Clearing jams 250 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 3 Close the front door. 4 From the printer control panel, touch to clear the message and continue printing. For non‑touch‑screen printer models, select Next > Clear the jam, press OK, and then press to confirm. [x]‑page jam, open tray [x] [24y.xx] 1 Pull out the tray completely.
Clearing jams 251 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 3 Insert the tray. 4 From the printer control panel, touch to clear the message and continue printing. For non‑touch‑screen printer models, select Next > Clear the jam, press OK, and then press to confirm.
Clearing jams 252 [x]‑page jam, clear manual feeder [251.xx] 1 Pull out the standard 250-sheet tray (Tray 1) and manual feeder. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 3 Insert the tray. 4 From the printer control panel, touch to clear the message and continue printing. For non‑touch‑screen printer models, select Next > Clear the jam, press OK, and then press to confirm. [x]‑page jam, clear multipurpose feeder [250.
Clearing jams 253 2 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 3 Reload paper into the multipurpose feeder.
Clearing jams 254 4 Slide the paper guide until it rests lightly against the edge of the paper stack. 1 2 5 From the printer control panel, touch models, select Next > to clear the message and continue printing. For non‑touch‑screen printer > Clear the jam, press OK > . [x]‑page jam, open automatic feeder top cover. [28y.xx] 1 Remove all original documents from the ADF tray. Note: The message is cleared when the pages are removed from the ADF tray. 2 Open the ADF cover.
Clearing jams 255 3 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 4 Close the ADF cover. 5 Straighten the edges of the original documents, then load the documents into the ADF, and then adjust the paper guide. 6 From the printer control panel, touch models, select Next > to clear the message and continue printing. For non‑touch‑screen printer > Clear the jam, press OK > .
Troubleshooting 256 Troubleshooting Understanding the printer messages Adjusting color Wait for the process to complete. Change [paper source] to [custom type name] Try one or more of the following: • Load the correct size and type of paper in the tray, and then select Finished changing paper on the printer control panel to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm.
Troubleshooting 257 Close flatbed cover and load originals if restarting job [2yy.xx] Try one or more of the following: • Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan job. • Touch Scan from flatbed to continue scanning from the scanner glass immediately after the last successful scan job. • Touch Finish job without further scanning to end the last successful scan job. Note: This does not cancel the scan job.
Troubleshooting 258 • The print job is sent from a flash drive that is no longer attached to the USB port. • The printer hard disk contains print jobs that were stored when the hard disk was installed in a different printer model. Note: The printer hard disk and the flash drive are supported only in select printer models. From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press to confirm.
Troubleshooting 259 Incorrect paper size, open [paper source] [34] Try one or more of the following: • Load the correct size of paper in the tray. • From the printer control panel, select Continue to clear the message and print using a different tray. For non‑touch‑screen printer models, press • • • • to confirm. Check the tray length and width guides and make sure the paper is loaded properly in the tray.
Troubleshooting 260 Insufficient memory, some held jobs will not be restored [37] Try one or more of the following: • From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press to confirm. • Delete other held jobs to free up additional printer memory. Load [paper source] with [custom type name] Try one or more of the following: • Load the tray or feeder with the correct size and type of paper.
Troubleshooting 261 Load [paper source] with [paper type] [paper size] Try one or more of the following: • Load the tray or feeder with the correct size and type of paper. • To use the tray or feeder with the correct paper size and type, select Finished loading paper on the printer control panel. For non‑touch‑screen printer models, press to confirm. Note: If the printer detects a tray that has the correct paper size and type, then it feeds from that tray.
Troubleshooting 262 Maintenance kit low [80.xy] You may need to order a maintenance kit. For more information, contact customer support at http://support.lexmark.com or your service representative. If necessary, select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm. Maintenance kit nearly low [80.xy] For more information, contact customer support at http://support.lexmark.com or your service representative.
Troubleshooting 263 Non-Lexmark [color] [supply type], see User's Guide [33.xy] Note: The supply type can be toner cartridge or the imaging kit. The printer has detected a non‑Lexmark supply or part installed in the printer. Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components.
Troubleshooting 264 Reload printed pages in Tray [x] Try any of the following: • From the printer control panel, select Continue to clear the message and continue printing the second side of the sheet. For non‑touch‑screen printer models, press to confirm. • Cancel the print job. Remove packaging material, [area name] 1 Remove any remaining packing material from the indicated location. 2 From the printer control panel, touch Continue to clear the message.
Troubleshooting 265 Replace the indicated imaging kit to clear the message and continue printing. For more information, see the instruction sheet that came with the supply. Note: If you do not have a replacement imaging kit, then see the “Ordering supplies” section of the User’s Guide or visit www.lexmark.com. Replace all originals if restarting job. Try one or more of the following: • Touch Cancel job to clear the message and cancel the scan job.
Troubleshooting 266 Replace maintenance kit, 0 estimated pages remain [80.xy] Contact customer support at http://support.lexmark.com or your service representative, and then report the message. The printer is scheduled for maintenance. Replace missing [color] cartridge [31.xy] Install the indicated toner cartridge to clear the message. For more information, see the “Replacing supplies” section of the User’s Guide. Replace missing [type] imaging kit [31.
Troubleshooting 267 Restore held jobs? Try one or more of the following: • Select Restore on the printer control panel to restore all held jobs stored in the printer hard disk. For non‑touch‑screen printer models, press to confirm. • Select Do not restore if you do not want any print jobs to be restored. For non‑touch‑screen printer models, press to confirm. Scanner automatic feeder cover open Close the ADF cover. Scanner disabled by admin [840.
Troubleshooting 268 SMTP server not set up. Contact system administrator. From the printer control panel, select Continue to clear the message. For non‑touch‑screen printer models, press to confirm. Note: If the message appears again, then contact your system support person. Standard network software error [54] Try one or more of the following: • From the printer control panel, select Continue to continue printing. For non‑touch‑screen printer models, press to confirm.
Troubleshooting 269 Too many trays attached [58] 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the extra trays. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on. [Type] imaging kit low [84.xy] Note: The type can be a black imaging kit, or a black and color imaging kit. You may need to order an imaging kit. If necessary, select Continue on the printer control panel to clear the message and continue printing.
Troubleshooting 270 Weblink server not set up. Contact system administrator. Select Continue to clear the message. For non‑touch‑screen printer models, press to confirm. Note: If the message appears again, then contact your system support person. Solving printer problems • “Basic printer problems” on page 270 • “Option problems” on page 272 • “Paper feed problems” on page 274 Basic printer problems The printer is not responding Action Yes No Step 1 Go to step 2. Turn on the printer.
Troubleshooting 271 Action Yes No Step 5 Go to step 6. Make sure to match the following: Check if the cables connecting the printer and the computer are inserted in the correct ports. • The USB symbol on the cable with the USB symbol on the printer Are the cables inserted in the correct ports? • The appropriate Ethernet cable with the Ethernet port Step 6 Make sure the electrical outlet is not turned off by a switch or breaker. Turn on the switch or reset the breaker. Go to step 7.
Troubleshooting 272 Printer display is blank Action Yes No Step 1 The problem is solved. Go to step 2. Press the Sleep button on the printer control panel. Does Ready appear on the printer display? Step 2 Turn off the printer, then wait for about 10 seconds, and then turn the printer back on. The problem is solved. Turn off the printer, and then contact customer support.
Troubleshooting 273 Action Yes No Step 4 a Check if the internal option is selected. The problem is solved. Contact customer support. It may be necessary to manually add the internal option in the printer driver to make it available for print jobs. For more information, see “Updating available options in the printer driver” on page 37. b Resend the print job. Does the internal option operate correctly? Cannot detect memory card Action Yes No Make sure the memory card is installed.
Troubleshooting 274 Action Yes No Step 3 Go to step 4. Reinstall the tray. For more information, see the setup documentation that came with the tray. Check if the tray is installed and recognized by the printer. Print a menu settings page, and then check if the tray is listed in the Installed Features list. Is the tray listed in the menu settings page? Step 4 Check if the tray is available in the printer driver. The problem is solved. Contact customer support.
Troubleshooting 275 Paper frequently jams Action Yes No Step 1 a Pull out the tray, and then do one or more of the following: Go to step 2. The problem is solved. Go to step 3. The problem is solved. • Make sure paper lies flat in the tray. • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray. • Check if the paper guides are aligned against the edges of the paper. • Make sure the paper is below the maximum paper fill indicator.
Troubleshooting 276 Solving print problems Printing problems Confidential and other held jobs do not print Note: Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs. Action Yes No Step 1 Go to step 2. Select one of the Print and Hold options, and then resend the print job. For more information, see “Printing confidential and other held jobs” on page 70.
Troubleshooting 277 Error message about reading the flash drive appears Action Yes No Step 1 Go to step 2. Insert the flash drive into the front USB port. Check if the flash drive is inserted into the front USB port. Note: The flash drive will not work if it is inserted into the rear USB port. Is the flash drive inserted into the front USB port? Step 2 Wait until the printer is Go to step 3. Check if the indicator light on the printer control panel is blinking green.
Troubleshooting 278 Job prints from the wrong tray or on the wrong paper Action Yes No Step 1 a Check if you are printing on paper that is supported by the tray. The problem is solved. Go to step 2. b Resend the print job. Did the job print from the correct tray or on the correct paper? Step 2 The problem is solved. Go to step 3. a From the Paper menu on the printer control panel, set the paper size and type to match the paper loaded in the tray. b Resend the print job.
Troubleshooting 279 Action Yes Step 3 The problem is solved. Contact customer support. Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job. No Did the job print and collate correctly? Multiple‑language PDF files do not print Action Yes No The problem is solved. Go to step 2. Step 1 a Check if the print options for the PDF output are set to embed all fonts.
Troubleshooting 280 Print jobs do not print Action Yes No Step 1 The problem is solved. Go to step 2. a From the document you are trying to print, open the Print dialog and check if you have selected the correct printer. Note: If the printer is not the default printer, then you must select the printer for each document that you want to print. b Resend the print job. Do the jobs print? The problem is solved. Go to step 3.
Troubleshooting 281 Print job takes longer than expected Action Yes No Step 1 The problem is solved. Go to step 2. Change the environmental settings of the printer. a From the printer control panel, navigate to: Settings > General Settings b Select Eco‑Mode or Quiet Mode, and then select Off. Note: Disabling Eco-Mode or Quiet Mode may increase the consumption of energy or supplies, or both. Did the job print? Step 2 The problem is solved. Go to step 3.
Troubleshooting 282 Tray linking does not work Notes: • The trays can detect paper length. • The multipurpose feeder does not automatically detect the paper size. You must set the size from the Paper Size/Type menu. Action Yes No Step 1 The problem is solved. Go to step 2. a Open the trays, and then check if they contain paper of the same size and type. • Check if the paper guides are in the correct positions for the size of the paper loaded in each tray.
Troubleshooting 283 Print quality problems Characters have jagged or uneven edges Action Yes Go to step 2. Step 1 a Print a font sample list to check if the fonts you are using are supported by the printer. 1 From the printer control panel, navigate to: No Select a font that is supported by the printer. Menus > Reports > Print Fonts 2 Select PCL Fonts or PostScript Fonts. b Resend the print job. Are you using fonts that are supported by the printer? The problem is solved. Contact customer support.
Troubleshooting 284 Action Yes No Step 2 Go to step 3. Do one or more of the following: From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray. • From the printer control panel, change the paper size to match the paper loaded in the tray. Does the paper size match the paper loaded in the tray? • From the printer control panel, change the paper type to match the paper loaded in the tray.
Troubleshooting 285 Action Yes No Step 1 The problem is solved. Go to step 2. Reduce the toner darkness. a From the Quality menu on the printer control panel, reduce the toner density. Note: 4 is the factory default setting. b Resend the print job. Did the gray background disappear? Step 2 a Remove, and then reinstall the imaging kit. The problem is solved. Contact customer support. Warning—Potential Damage: Do not expose the imaging kit to direct light for more than 10 minutes.
Troubleshooting 286 Action Yes No Step 3 a Remove, and then reinstall the imaging kit. Go to step 4. The problem is solved. Contact customer support. The problem is solved. Yes No Warning—Potential Damage: Do not expose the imaging kit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning—Potential Damage: Do not touch the underside of the imaging kit. This could damage the imaging kit. b Resend the print job.
Troubleshooting 287 Action Yes No Step 3 a Depending on your operating system, specify the paper size from Printing Preferences or from the Print dialog. b Resend the print job. The problem is solved. Contact customer support. Are the margins correct? Paper curl Action Yes No Step 1 Go to step 2. Adjust the width and length guides. Go to step 3. Specify the paper type and weight from the tray settings to match the paper loaded in the tray. Go to step 4. The problem is solved. Go to step 5.
Troubleshooting 288 Print irregularities Leading edge ) ) ABCDE ABCDE ABCDE Trailing edge Action Yes Step 1 Go to step 2. a Move the width and length guides in the tray to the correct positions for the size of the paper loaded in the tray. b Resend the print job. No The problem is solved. Do print irregularities still appear? Step 2 Go to step 3. From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.
Troubleshooting 289 Action Yes No Step 6 Contact customer support. The problem is solved. Action Yes No Step 1 a From the Quality menu on the printer control panel, select Color Adjust. b Resend the print job. Go to step 2. The problem is solved. Go to step 3. Step 2 a From the Quality menu on the printer control panel, reduce the toner darkness. The problem is solved. Replace the imaging kit, and then resend the print job.
Troubleshooting 290 Action Yes No Step 5 From the printer control panel, set the paper texture in the Paper menu to match the paper loaded on the tray. Go to step 6. Go to step 7. The problem is solved. Contact customer support. The problem is solved. Action Yes No Step 1 a From the Quality menu on the printer control panel, select Color Adjust. b Resend the print job. Go to step 2. The problem is solved. Step 2 Go to step 3.
Troubleshooting 291 Action Yes No Step 3 Go to step 4. Specify the paper type, texture, and weight from the tray settings to match the paper loaded in the tray. Go to step 5. Step 4 a Depending on your operating system, specify the paper type, texture, and weight from Printing Preferences or from the Print dialog. b Resend the print job. The problem is solved. From the printer control panel, set the paper type, texture, and weight in the Paper menu to match the paper loaded in the tray.
Troubleshooting 292 Action Yes No Step 1 a Check if there is packing material left on the imaging kit. 1 Remove the imaging kit. Go to step 2. The problem is solved. Contact customer support. The problem is solved. Action Yes No Step 1 a Remove, and then reinstall the imaging kit. Go to step 2. The problem is solved. Contact customer support. The problem is solved. 2 Check if the packing material is properly removed from the imaging kit.
Troubleshooting 293 Repeating defects appear on prints ) ) ) Action Yes Step 1 Go to step 2. 1 Check if the distance between the defects is equal to one of the following: Measure the distance between the defects. Check for a distance between the defects that equals: • • • • • No 25.1 mm (0.98 in.) 29.8 mm (1.17 in.) • 37.7 mm 43.9 mm (1.72 in.) (1.48 in.) 45.5 mm (1.79 in.) • 78.5 mm 94.2 mm (3.70 in.) (3.09 in.) • 95 mm (3.74 in.
Troubleshooting 294 Action Yes No Step 1 Go to step 2. Load paper with the correct paper type and weight in the tray. Go to step 3. Change the paper type and weight to match the paper loaded in the tray. Go to step 4. The problem is solved. Contact customer support. The problem is solved. Yes No Check if the paper loaded in the tray has the correct paper type and weight.
Troubleshooting 295 Streaked horizontal lines appear on prints ABCDE ABCDE ABCDE Action Yes Go to step 2. Step 1 a Depending on your operating system, specify the tray or feeder from Printing Preferences or the Print dialog. b Resend the print job. No The problem is solved. Do streaked horizontal lines appear on prints? Step 2 Go to step 3. From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray.
Troubleshooting 296 Action Yes No Step 4 a Remove, and then reinstall the imaging kit. Go to step 5. The problem is solved. Contact customer support. The problem is solved. Yes No Warning—Potential Damage: Do not expose the imaging kit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning—Potential Damage: Do not touch the underside of the imaging kit. This could damage the imaging kit. b Resend the print job.
Troubleshooting 297 Action Yes No Step 3 a Load paper from a fresh package. Go to step 4. The problem is solved. Go to step 5. The problem is solved. Contact customer support. The problem is solved. Action Yes No Step 1 a Remove, and then reinstall the imaging kit. The problem is solved. Go to step 2. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job.
Troubleshooting 298 Action Yes Step 2 The problem is solved. Contact customer support. Replace the imaging kit, and then resend the print job. No Does fog or shading disappear from the prints? Toner rubs off Leading edge ABC DEF Trailing edge Action Yes No Step 1 Go to step 2. Specify the paper type and weight from the tray settings to match the paper loaded in the tray. From the Paper menu on the printer control panel, set the paper texture. Contact customer support.
Troubleshooting 299 Transparency print quality is poor Action Yes No Step 1 Go to step 2. Set the paper type to Transparency. Contact customer support. The problem is solved. Action Yes No Replace the imaging kit, and then resend the print job. Contact customer support. The problem is solved. Action Yes No Step 1 a Check if your software program is using a correct fill pattern. Go to step 2. The problem is solved.
Troubleshooting 300 Action Yes No Step 2 a From the Paper Menu on the printer control panel, check the paper type and paper weight. b Resend the print job. Go to step 3. The problem is solved. Go to step 4. The problem is solved. Go to step 5. The problem is solved. Contact customer support. The problem is solved. Do vertical voids appear on prints? Step 3 Check if you are using a recommended type of paper. a Load paper source with a recommended type of paper. b Resend the print job.
Troubleshooting 301 How is color specified in a document to be printed? Software programs typically specify the document color using RGB or CMYK color combinations. Additionally, they let users modify the color of each object in a document. For more information, see the help information of your operating system. How does the printer know what color to print? When a user prints a document, information describing the type and color of each object is sent to the printer.
Troubleshooting Object type CMYK Image 302 Color conversion tables • US CMYK—Applies color correction to approximate the SWOP (Specifications for Web Offset Publishing) color output. CMYK Text CMYK Graphics • Euro CMYK—Applies color correction to approximate Euroscale color output. • Vivid CMYK—Increases the color saturation of the US CMYK color correction setting. • Off—No color correction is implemented.
Troubleshooting 303 Action Yes Step 3 The problem is solved. Contact customer support. Make sure you are using a recommended type of color transparency, and then resend the print job. No Does the print on the color transparency look lighter? The color of the print does not match the color of the original file Note: The color conversion tables used in Auto Color Correction mode generally approximate the colors of a standard computer monitor.
Troubleshooting 304 • “Scanner unit does not close” on page 304 • “Poor copy quality” on page 305 • “Partial document or photo copies” on page 306 Copier does not respond Action Yes Step 1 Clear the error or status Go to step 2. message. Check if an error or status message appears on the display. No Does an error or status message appear? Step 2 Go to step 3. Check if the power cord is plugged into the printer and a properly grounded electrical outlet.
Troubleshooting 305 Poor copy quality Action Yes Step 1 Clear the error or status Go to step 2. message. Check if an error or status message appears on the display. No Does an error or status message appear? Step 2 Go to step 3. Increase the scan resolution setting for a higher‑quality output. Go to step 4. See “Cleaning the scanner glass” on page 211. Go to step 5. See “Print quality problems” on page 283. Go to step 6.
Troubleshooting 306 Action Yes No Step 8 Go to step 9. The problem is solved. Contact customer support. The problem is solved. Action Yes No Step 1 Go to step 2. Place the document or photo facedown on the scanner glass in the upper left corner. Go to step 3. Change the paper size setting to match the paper loaded in the tray, or load the tray with paper that matches the paper size setting. Check for missing or faded text on prints.
Troubleshooting 307 Solving fax problems Caller ID is not shown Action Yes No Contact your telephone company to check if your telephone line is subscribed to the caller ID service. The problem is solved. Contact customer support. Notes: • If your region supports multiple caller ID patterns, then you may have to change the default setting. There are two settings available: FSK (pattern 1) and DTMF (pattern 2).
Troubleshooting 308 Action Yes No Step 4 Go to step 5. Securely connect the cables. Check the printer connections. If applicable, check if the cable connections for the following equipment are secure: • Telephone • Handset • Answering machine Are the cable connections secure? Step 5 a Check the telephone wall jack. 1 Plug the telephone cable into the wall jack. The problem is solved. Go to step 6. 2 Listen for a dial tone.
Troubleshooting 309 Action Yes Step 7 Go to step 8. Check for a dial tone. Did you hear a dial tone? No • Try calling the fax number to make sure that it is working properly. • If the telephone line is being used by another device, then wait until the other device is finished before sending a fax. • If you are using the On Hook Dial feature, then turn up the volume to check if you hear a dial tone. Step 8 The problem is solved. Go to step 9.
Troubleshooting 310 Can send but not receive faxes Action Yes No Step 1 The problem is solved. Go to step 2. Check the tray or feeder. If empty, then load paper in the tray or feeder. Can you receive faxes? Step 2 The problem is solved. Go to step 3. Check the ring count delay settings. a Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen.
Troubleshooting 311 Action Yes No Step 2 The problem is solved. Go to step 3. Load the original document properly. Load the original document faceup, short edge first into the ADF tray or facedown on the scanner glass in the upper left corner. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. Can you send faxes? The problem is solved. Contact customer support.
Troubleshooting 312 Received fax has poor print quality Action Yes No Step 1 The problem is solved. Go to step 2. Ask the person who sent you the fax to: a Check if the quality of the original document is satisfactory. b Increase the fax scan resolution, if possible. c Resend the fax. Is the fax print quality satisfactory? The problem is solved. Go to step 3. Step 2 Decrease the incoming fax transmission speed. a Open a Web browser, and then type the printer IP address in the address field.
Troubleshooting • • • • 313 “Scanning takes too long or freezes the computer” on page 315 “Poor scanned image quality” on page 315 “Partial document or photo scans” on page 316 “Cannot scan from a computer” on page 316 The scanner does not respond Action Yes No Step 1 Go to step 2. Turn on the printer. Go to step 3. Connect the printer cable securely to the printer and the computer, print server, option, or other network device. Go to step 4.
Troubleshooting 314 Action Yes Step 7 The problem is solved. Contact customer support. Turn off the printer, then wait for about 10 seconds, and then turn the printer back on. No Are the printer and scanner working? Scan job was not successful Action Yes No Step 1 Go to step 2. Connect the cables properly. Change the file name. Go to step 3. Close the file you are scanning. Go to step 4. Check the cable connections.
Troubleshooting 315 Scanning takes too long or freezes the computer Action Yes No Step 1 Go to step 2. The problem is solved. Contact customer support. The problem is solved. Action Yes No Step 1 Check if an error message appears on the display. Clear the error message. Go to step 2. Go to step 3. Increase the scan resolution settings for a higher‑quality output. Go to step 4. See “Cleaning the scanner glass” on page 211. Go to step 5.
Troubleshooting 316 Action Yes No Step 6 Go to step 7. Change the Content Type and Content Source settings to match the document being scanned. Problem solved. Contact customer support. Yes No Check the scan settings. From the Scan screen, make sure the Content Type and Content Source settings are correct for the document being scanned.
Troubleshooting 317 Solving home screen applications problems • “An application error has occurred” on page 317 An application error has occurred Action Yes No Step 1 Check the system log for relevant details. a Open a Web browser, and then type the printer IP address in the address field. Go to step 2. Contact customer support. If you do not know the IP address of the printer, then you can: • View the IP address on the printer home screen.
Troubleshooting 318 Action Yes No Step 2 The problem is solved. Go to step 3. Make sure the printer IP address is correct. a View the printer IP address: • From the TCP/IP section in the Network/Ports menu • By printing a network setup page or menu settings page, and then finding the TCP/IP section Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. b Open a Web browser, and then type the IP address.
Troubleshooting 319 Contacting customer support When you contact customer support, you will need to be able to describe the problem you are experiencing, the message on the printer display, and the troubleshooting steps you have already taken to find a solution. You need to know your printer model type and serial number. For more information, see the label at the back of the printer. The serial number is also listed on the menu settings page.
Notices 320 Notices Product information Product name: Lexmark CX410e and CX410de Machine type: 7527 Model(s): 415, 436 Edition notice October 2012 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Notices 321 Licensing notices All licensing notices associated with this product can be viewed from the root directory of the installation software CD. Trademarks Lexmark, Lexmark with diamond design, MarkNet, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. PCL® is a registered trademark of the Hewlett-Packard Company.
Notices 322 Taffy Agfa Corporation Times New Roman The Monotype Corporation plc Univers Linotype-Hell AG and/or its subsidiaries All other trademarks are the property of their respective owners. Noise emission levels The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296. Note: Some modes may not apply to your product.
Notices 323 Static sensitivity notice This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer. ENERGY STAR Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark. Temperature information Ambient temperature 15.6 to 32.
Notices 324 DANGER - Invisible laser radiation when cartridges are removed and interlock defeated. Avoid exposure to laser beam. PERIGO - Radiação a laser invisível será liberada se os cartuchos forem removidos e o lacre rompido. Evite a exposição aos feixes de laser. Opasnost - Nevidljivo lasersko zračenje kada su kasete uklonjene i poništena sigurnosna veza. Izbjegavati izlaganje zracima. NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, ze zařízení je vysíláno neviditelné laserové záření.
Notices 325 Sleep Mode This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout. Factory default Sleep Mode Timeout for this product (in minutes): 30 minutes By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 120 minutes.
Notices 326 The FCC Class B limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Notices 327 Regulatory notices for telecommunication terminal equipment This section contains regulatory information pertaining to products that contain telecommunication terminal equipment such as facsimile. Notice to users of the US telephone network: FCC requirements This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA).
Notices 328 The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless said message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message, and the telephone number of the sending machine or such business, o
Notices 329 To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.
Notices 330 Some parameters required for compliance with Telecom's telepermit requirements are dependent on the equipment associated with this device.
Notices 331 Compliance is indicated by the CE marking. The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
Notices 332 This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950. Products equipped with 2.
Notices 333 Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC. Italiano Con la presente Lexmark International, Inc.
Notices 334 If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option). If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.
Notices 335 —Maintenance by anyone other than Lexmark or a Lexmark authorized servicer —Operation of a product beyond the limit of its duty cycle —Use of printing media outside of Lexmark specifications —Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts —Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR RE
Notices 336 The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Addition of the Camellia Cipher Suites to Transport Layer Security (TLS) implemented in the product or service. The use of certain patents in this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp.
Index 337 Index Numerics 250‑sheet tray loading 45 550‑sheet tray installing 33 loading 45 650‑sheet duo tray installing 33 loading 45, 49 Symbols [Color] cartridge low [88.xy] 257 [Color] cartridge nearly low [88.xy] 257 [Color] cartridge very low, [x] estimated pages remain [88.xy] 257 [Type] imaging kit low [84.xy] 269 [Type] imaging kit nearly low [84.xy] 269 [Type] imaging kit very low, [x] estimated pages remain [84.xy] 269 [x]-page jam, open front door [20y.
Index confidential print jobs 69 printing from a Macintosh computer 70 printing from Windows 70 Confidential Print menu 143 Configuration change, some held jobs were not restored [57] 257 configuration information wireless network 40 configurations printer 11 configuring multiple printers 238 supply notifications, imaging kit 237 supply notifications, maintenance kit 237 supply notifications, toner cartridge 237 supply notifications, waste toner bottle 237 configuring supply notifications from the Embedded
Index D darkness copy options 82 e‑mail options 90 fax options 112 scan options 120 date and time, fax setting 106 daylight saving time, setting 106 Default Source menu 124 Defective flash detected [51] 258 delayed send fax options 114 developer unit replacing 219, 228 device and network settings information erasing 207 different paper sizes, copying 76 Digital Subscriber Line (DSL) fax setup 98 digital telephone service fax setup 100 directory list printing 71 Disk full 62 258 Disk must be formatted for u
Index setting up e‑mail function 85 using a shortcut number 87 using the address book 87 using the printer control panel 86 F factory defaults restoring 238 FAQ about color printing 300 fax sending 107 sending using the printer control panel 106 fax and e‑mail functions setting up 311 fax and e‑mail functions are not set up 311 fax log viewing 110 Fax Mode (Analog Fax Setup) menu 160 Fax Mode (Fax Server Setup) menu 168 fax name, setting 105 fax number, setting 105 fax options advanced imaging 114 content
Index imaging kit replacing 219 imaging kits ordering 214 importing a configuration using the Embedded Web Server 24 Incompatible tray [x] [59] 258 Incorrect paper size, open [paper source] [34] 259 indicator light printer control panel 14 individual settings information erasing 207 initial fax setup 93 using the Embedded Web Server 93 Insert Tray [x] 259 inserting a header or footer 80 installing an optional card 31 installing options order of installation 33 installing printer on a network Ethernet netwo
Index Miscellaneous 143 Network [x] 134 Network Card 136 Network Reports 136 Paper Loading 130 Paper Size/Type 124 Paper Texture 127 Paper Weight 129 PCL Emul 193 PDF 192 PostScript 192 Print Settings 182 Quality 187 Reports 133 Scan Settings 179 Security Audit Log 145 Set Date and Time 145 Setup 184 SMTP Setup menu 141 Standard Network 134 Standard USB 140 Substitute Size 127 Supplies 123 TCP/IP 137 Universal Setup 133 Utilities 191 Wireless 138 XPS 192 message e‑mail options 89 Miscellaneous menu 143 mov
Index checking, using the Embedded Web Server 212 using genuine Lexmark 213 PCL Emul menu 193 PDF menu 192 Personal Identification Number method using 42 phone splitter 99 photos copying 74 placing separator sheets between copies 79 PostScript menu 192 power cord socket 35 preparing to set up the printer on an Ethernet network 38 print irregularities 288 print job canceling, from computer 71 print quality cleaning the scanner glass 211 replacing a developer unit 228 replacing imaging kit 219 replacing the
Index Insufficient memory for Flash Memory Defragment operation [37] 259 Insufficient memory to collate job [37] 259 Insufficient memory to support Resource Save feature [35] 259 Insufficient memory, some Held Jobs were deleted [37] 259 Insufficient memory, some held jobs will not be restored [37] 260 Load [paper source] with [custom string] 260 Load [paper source] with [custom type name] 260 Load [paper source] with [paper size] 260 Load [paper source] with [paper type] [paper size] 261 Load Manual Feeder
Index Q Quality menu 187 Quiet Mode 200 R recipient(s) e‑mail options 89 recycled paper using 60, 199 recycling Lexmark packaging 204 Lexmark products 204 toner cartridges 204 reducing a copy 77 reducing noise 200 Reinstall missing or unresponsive [color] cartridge [31.
Index scanning to a computer 118 using the Embedded Web Server 117 scanning to a flash drive 119 scanning to an FTP address creating shortcuts using the computer 115 using a shortcut number 116 using the printer control panel 116 scanning to network destinations 115 Schedule Power Modes using 203 security modifying confidential print settings 70, 238 Security Audit Log menu 145 security lock 206 security lock port 35 security settings information erasing 207 security Web page where to find 209 selecting a
Index Too many flash options installed [58] 268 Too many trays attached [58] 269 touch screen buttons 16 transmission log e‑mail options 91 fax options 114 scan options 121 transparencies copying on 74 loading 50 tips on using 56 trays linking 52, 54 unlinking 52, 54 troubleshooting an application error has occurred 317 cannot open Embedded Web Server 317 checking an unresponsive printer 270 contacting customer support 319 FAQ about color printing 300 fax and e‑mail functions are not set up 311 solving bas
Index V verify print jobs 69 printing from a Macintosh computer 70 printing from Windows 70 vertical voids appear on prints 299 viewing reports 236 viewing a fax log 110 virtual display checking, using Embedded Web Server 236 voice mail setting up 94 Voice over Internet Protocol (VoIP) fax setup 99 VoIP adapter 99 volatile memory 206 erasing 207 volatility statement of 206 W waste toner bottle ordering 215 replacing 215 Waste toner bottle nearly full [82.
