Quick Start Guide

• For Macintosh users, select Print and Hold.
3 Select the print job type.
4 If necessary, assign a user name.
5 Send the print job.
6 From the printer home screen, touch Held Jobs.
7 Send the print job.
Canceling a print job
From the printer control panel
1 From the home screen, touch Job Queue.
Note: You can also access this setting by touching the top
section of the home screen.
2 Select the job to cancel.
From the computer
1 Depending on the operating system, do either of the following:
• Open the printers folder, and then select your printer.
• From the System Preferences in the Apple menu, navigate
to your printer.
2 Select the job to cancel.
Loading paper
Loading trays
CAUTION—TIPPING HAZARD: To reduce the risk of
equipment instability, load each tray separately. Keep all
other trays closed until needed.
1 Remove the tray.
Note: To avoid jams, do not remove tray while the printer is
busy.
2 Adjust the guides to match the size of the paper you are
loading.
Note: Use the indicators on the bottom of the tray to position
the guides.
3 Flex, fan, and align the paper edges before loading.
4 Load the paper stack with the printable side faceup.
Notes:
• Do not slide paper into the tray.
• Make sure that the stack height is below the maximum
paper
fill
indicator.
Overfilling
may cause paper jams.
5 Insert the tray.
If necessary, set the paper size and type to match the paper
loaded in the tray.
2