Operation Manual

• Keep the printer:
– Clean, dry, and free of dust.
– Away from stray staples and paper clips.
– Away from the direct airflow of air conditioners, heaters, or ventilators.
– Free from direct sunlight and humidity extremes.
• Observe the recommended temperatures and avoid
fluctuations:
Ambient temperature 10 to 32.2°C (50 to 90°F)
Storage temperature -40 to 43.3°C (-40 to 110°F)
• Allow the following recommended amount of space around the printer for proper ventilation:
1 Top 330 mm (13 in.)
2 Right side 152 mm (6 in.)
3 Front 381 mm (15 in.)
4 Left side 457 mm (18 in.)
5 Rear 203 mm (8 in.)
Printer configurations
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, see
www.lexmark.com/multifunctionprinters.
You can configure your printer by adding an optional 2200‑sheet tray or a combination of up to three optional
550‑sheet trays or envelope trays.
Learning about the printer 11