Operation Manual

Bluetooth Dongle Connected appears on the display.

Note: A Bluetooth adapter is not included with the printer.

2 From the printer control panel, press .

3 Press the arrow buttons to scroll to Bluetooth Setup, and then press button .

4 Press the arrow buttons to scroll to Security Level, and then press .

5 Press the arrow buttons to select the security level, and then press .

• Select Low to allow Bluetooth devices to connect and send print jobs to your printer without requiring users to

enter a pass key.

• Select High to require users to enter a four-digit numeric pass key on the Bluetooth device before connecting

and sending print jobs to the printer.

6 The Bluetooth Pass Key menu appears on the display if you set the security level to High. Use the keypad to enter

your four-digit pass key, and then press

Printing from a Bluetooth-enabled device

Note: The printer does not support printing files from your computer using a Bluetooth connection.

1 Insert a USB Bluetooth adapter into the USB port.

Bluetooth Dongle Connected appears on the display.

Warning—Potential Damage: Do not touch cables, any network adapter, any connector, the USB Bluetooth

adapter, or the printer in the areas shown while actively printing, reading, or writing from a Bluetooth-enabled

device. A loss of data can occur.

Notes:

• A Bluetooth adapter is not included with the printer.

• Your printer automatically switches to Bluetooth mode when you insert a USB Bluetooth adapter.

2 Make sure the printer is set up to receive Bluetooth connections. For more information, see “Setting up a connection

between your printer and a Bluetooth-enabled device” on page 46.

Printing