Operation Manual

85
Parallel Menu
Use this menu to change settings for jobs sent to the printer through the parallel interface connection.
• NPA MODE
• PARALLEL BUFFER
• ADVANCED STATUS
• PROTOCOL
• HONOR INIT
• PARALLEL MODE 1
• P
ARALLEL MODE 2
NPA Mode
When NPA Mode is enabled, your computer can send print jobs to the printer and query printer status
information simultaneously.
Parallel Buffer
You can configure the size of the parallel input buffer to meet your system’s requirements. The
maximum size you can modify depends on the amount of memory in your printer. Auto, the default
setting, calculates a buffer size proportional to the total amount of available printer memory.
Menu item Value
NPA Mode =On
=Off
=Auto*
*Factory default
Menu item Value
Parallel Buffer =Disabled
=Auto*
3K to maximum size allowed
Note: Changing the parallel buffer setting automatically resets the
printer.
*Factory default