Quick Reference Guide

• Flex the stack of envelopes back and forth to loosen them, and

then fan them. Straighten the edges on a level surface.

4 Load the paper or specialty media.

Notes:

• Do not force paper or specialty media into the multipurpose

feeder.

• Make sure the paper or specialty media is below the

maximum paper fill indicator located on the paper guides.

Overfilling may cause paper jams.

• Load paper, transparencies, and card stock with the

recommended printable side faceup and the top edge entering

the printer first. For more information on loading

transparencies, see the packaging that the transparencies came

in.

Note: When loading A6‑size paper, make sure the

multipurpose feeder extender rests lightly against the edge

of the paper so that the last few sheets of paper remain in

place.

• Load letterhead faceup with the top edge entering the printer

first. For two‑sided (duplex) printing, load letterhead facedown

with the bottom edge entering the printer first.