User's Manual

Doc No.: Rev. 001 Page 2 of 18
Mercury containing components, such as switches or
backlighting lamps
0
N/A
Batteries
1
Lithium Manganese Dioxide coin cell
located on the system controller card
Printed circuit boards greater than 10 cm
2
11
25
– For MX710de, Lexmark MX710de3,
and MX711dthe (locations illustrated
in 4.2)
10 for MX710de and MX711dhe
9 for MX711de, Lexmark
MX711de3
– For MX812dtpe (locations illustrated
in 4.2)
24 for MX810/811/812 dpe, dxpe
23 for MX810/811/812dtme,
MX810/811/812dxme
22 for MX810/811/812dte, dme,
dtfe, dxfe
21 for MX810/811/812de, dfe, dxe
Toner cartridges, liquid and pasty, as well as colour
toner
1
Located inside front cover
Plastic containing brominated flame retardants
4 Fans;
46
Sensors;
8 Fuser
parts
Fan(s) and Sensors (locations
illustrated in 4.2)
Plastic parts located in the fuser
assembly marked with recycle code
that includes "FR17"or “FR16”
Asbestos waste and components which contain
asbestos
0
N/A
Cathode ray tubes
0
N/A
Chlorofluorocarbons (CFC), Hydrochlorofluorocarbons
(HCFC) or Hydrofluorocarbons (HFC), Hydrocarbons
(HC)
0
N/A
Gas discharge lamps
0
N/A
Liquid Crystal Display (LCD) greater than 100 cm
2
and
those back-lighted with Gas discharge lamps
1
LCD located inside OP panel
External electrical cables
1
Power cord located on the back lower
left quadrant
Components containing refractory fibres
0
N/A
Components containing radioactive substances
0
N/A
Electrolyte capacitors containing substances of
concern
1
10
Capacitor(s) located on Power Supply
(locations illustrated in 4.2)
1
With (height > 25 mm, diameter > 25 mm or proportionately similar volume)