Owner's Manual

Menu item Description

Parity

Even

Odd

None

Ignore

Sets the parity for serial input and output data frames

Note: None is the factory default setting.

Honor DSR

Off

Determines whether the printer uses the DSR Signal. DSR is a handshaking signal used

by most serial cables.

Notes:

• Off is the factory default setting.

• The serial port uses DSR to distinguish data sent by the computer from data

created by electrical noise in the serial cable. The electrical noise can cause

stray characters to print. Select On to prevent stray characters from printing.

Security menu

Miscellaneous menu

Menu item Description

Panel Logins

Failure time frame

Lockout time

Limits the number and time frames of failed login attempts from the printer control

panel before all users are locked out

Notes:

• “Login failures” specifies the number of failed login attempts before users are

locked out. Settings range from 1–50. 3 attempts is the factory default setting.

• “Failure time frame” specifies the time frame during which failed login

attempts can be made before users are locked out. Settings range from 1–60

minutes. 5 minutes is the factory default setting.

• “Lockout time” specifies how long users are locked out after exceeding the

default setting. 0 indicates the printer does not impose a lockout time.

• “Login timeout” specifies how long the printer remains idle on the Home

screen before automatically logging the user off. Settings range from 1–900

seconds. 300 seconds is the factory default setting.

Understanding printer menus 173