- 4232 Printer 302 User's Guide

1. Press Stop.
2. Be sure that the print head movement is not blocked.
3. Press Start to resume printing.
4. If the printer displays any of these status codes again:
a. Turn the power Off (O).
b. Wait 10 seconds, then turn the power On (|).
c. Run the Printer Verification Test (see “Printer Verification” on
page 4-12).
d. If the printer displays this status code again, call for service.
ð5ð MACHINE CHECK
SEE USER'S GUIDE
ð51 MACHINE CHECK
SEE USER'S GUIDE
ð52 MACHINE CHECK
SEE USER'S GUIDE
ð53 MACHINE CHECK
SEE USER'S GUIDE
ð55 MACHINE CHECK
SEE USER'S GUIDE
ð56 MACHINE CHECK
SEE USER'S GUIDE
ð58 PRINTER BOARD FAILURE
SEE USER'S GUIDE
B-12 User’s Guide Model 302