Operation Manual

Use To
Audio Feedback
1
Button Feedback
On
Off
Volume
1–10
Specify the audio volume for the buttons.
Notes:
• On is the factory default setting for Button Feedback.
• 5 is the factory default setting for Volume.
Show Bookmarks
1
Yes
No
Specify whether bookmarks are displayed from the Held Jobs area.
Note: Yes is the factory default setting.
Web Page Refresh Rate
1
30–300
Specify the number of seconds between Embedded Web Server
refreshes.
Note: 120 is the factory default setting.
Contact Name
1
Specify a contact name.
Note: The contact name is stored on the Embedded Web Server.
Location
1
Specify the location.
Note: The location is stored on the Embedded Web Server.
Alarms
1
Alarm Control
Cartridge Alarm
Set an alarm when the printer requires user intervention.
For each alarm type, select from the following options:
Off
Single
Continuous
Notes:
• Single is the factory default setting for Alarm Control. This
sounds three quick beeps.
• Off is the factory default setting for Cartridge Alarm.
• Continuous repeats three beeps every 10 seconds.
Timeouts
Standby Mode
1
Disabled
1–240
Specify the number of minutes of inactivity before the printer
enters a lower power state.
Note: 15 is the factory default setting.
1
This menu item appears only in touch‑screen printer models.
2
This menu item appears only in non‑touch‑screen printer models.
Understanding the printer menus 110