Operation Manual

Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board electronic components
or connectors.
1 Access the controller board.
For the MS510dn, MS517dn, MS610dn, and MS617dn printer models, see
“Accessing the controller board”
on page 38.
For the MS610de printer model, see
“Accessing the controller board” on page 71.
2 Unpack the optional card.
Warning—Potential Damage: Avoid touching the connection points along the edge of the card.
3 Holding the card by its sides, align the plastic pins (1) on the card with the holes (2) on the controller board.
2
1
Additional printer setup 13