MS810 Series User's Guide Important: Click here before using this guide. October 2012 Machine type(s): 4063 Model(s): 210, 230, 23E, 410, 430, 630, 63E www.lexmark.
Contents 2 Contents Safety information.......................................................................................6 Overview.....................................................................................................8 Using this guide.........................................................................................................................................8 Finding information about the printer................................................................................
Contents 3 Setting the paper size and type ........................................................................................................................98 Configuring Universal paper settings................................................................................................................99 Loading the 250‑ or 550‑sheet tray..................................................................................................................99 Loading the 2100‑sheet tray...............
Contents 4 Loading the 2100‑sheet tray...........................................................................................................................156 Loading the multipurpose feeder ...................................................................................................................163 Linking and unlinking trays .............................................................................................................................168 Printing............................
Contents 5 Maintaining the printer............................................................................257 Ordering supplies..................................................................................................................................257 Storing supplies.....................................................................................................................................260 Replacing supplies..........................................................................
Safety information 6 Safety information Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible. Do not place or use this product near water or wet locations. CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Safety information 7 CAUTION—SHOCK HAZARD: Make sure that all external connections (such as Ethernet and telephone system connections) are properly installed in their marked plug-in ports. This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.
Overview 8 Overview Using this guide This User’s Guide provides general and specific information on using the printer models that are listed on the cover page.
Overview 9 What are you looking for? Find it here Help using the printer software Windows or Mac Help—Open a printer software program or application, and then click Help. Click ? to view context‑sensitive information. Notes: • Help is automatically installed with the printer software. • The printer software is located in the printer program folder or on the desktop, depending on your operating system.
Selecting a location for the printer 10 Selecting a location for the printer CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any hardware options, then leave enough room for them also. It is important to: • Set up the printer near a properly grounded and easily accessible electrical outlet.
Selecting a location for the printer 11 5 4 1 3 2 1 Right side 152 mm (6 in.) 2 Front 508 mm (20 in.) 3 Left side 152 mm (6 in.) 4 Rear 152 mm (6 in.) 5 Top 115 mm (4.5 in.) 5 4 1 3 2 1 Right side 152 mm (6 in.) 2 Front 508 mm (20 in.) 3 Left side 152 mm (6 in.) 4 Rear 152 mm (6 in.) 5 Top 115 mm (4.5 in.
Additional printer setup 12 Additional printer setup Installing internal options CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and then unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Additional printer setup 13 2 Using a screwdriver, loosen the screws on the controller board shield. 3 Remove the shield.
Additional printer setup 14 4 Use the following illustration to locate the appropriate connector: Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer first before touching any controller board electronic component or connector.
Additional printer setup 15 6 Tighten the screws on the shield. 7 Reattach the access cover. 1 2 Installing a memory card CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Additional printer setup 16 An optional memory card can be purchased separately and attached to the controller board. 1 Access the controller board. For more information, see “Accessing the controller board” on page 12. 2 Unpack the memory card. Warning—Potential Damage: Do not touch the connection points along the edge of the card. Doing so may cause damage. 3 Align the notch (1) on the memory card with the ridge (2) on the connector.
Additional printer setup 17 Installing an Internal Solutions Port The controller board supports one optional Lexmark Internal Solutions Port (ISP). Note: This task requires a flat‑head screwdriver. CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing.
Additional printer setup 18 4 Remove the metal cover from the ISP opening. a Loosen the screw. b Lift the metal cover, and then pull it out completely. 1 2 3 5 Align the posts of the plastic bracket with the holes on the controller board cage, and then press the plastic bracket on the controller board cage until it clicks into place. Note: Make sure that the plastic bracket has latched completely, and that the plastic bracket is seated firmly on the controller board cage.
Additional printer setup 19 6 Install the ISP on the plastic bracket. Note: Hold the ISP at an angle over the plastic bracket so that any overhanging connectors will pass through the ISP opening in the controller board cage. 7 Lower the ISP toward the plastic bracket until the ISP is seated between the guides of the plastic bracket.
Additional printer setup 8 Use the provided thumbscrew for the ISP to attach the plastic bracket to the ISP. Note: Turn the screw clockwise, enough to hold the ISP in place, but do not tighten it yet. 9 Attach the two provided screws to secure the ISP mounting bracket to the controller board shield. 10 Tighten the thumbscrew that is attached to the ISP. Warning—Potential Damage: Do not screw it on too tightly.
Additional printer setup 11 Connect the ISP solution interface cable into the receptacle of the controller board. Note: The plugs and receptacles are color-coded. Installing an optional card CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing.
Additional printer setup 22 3 Holding the card by its sides, align the plastic pins (1) on the card with the holes (2) on the controller board. 1 2 4 Push the card firmly into place as shown in the illustration. Warning—Potential Damage: Improper installation of the card may cause damage to the card and the controller board. Note: The entire length of the connector on the card must touch and be flushed against the controller board. 5 Close the controller board access door.
Additional printer setup Installing a printer hard disk Note: This task requires a flat‑head screwdriver. CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Additional printer setup 24 To install a printer hard disk onto the ISP: a Remove the screws attached to the printer hard disk mounting bracket, and then remove the bracket. b Align the standoffs of the printer hard disk to the holes in the ISP, and then press the printer hard disk down until the standoffs are in place. Installation warning: Hold only the edges of the printed circuit board assembly. Do not touch or press on the center of the printer hard disk. Doing so may cause damage.
Additional printer setup 25 To install a printer hard disk directly on the controller board cage: a Align the standoffs of the printer hard disk to the holes in the controller board cage, and then press the printer hard disk down until the standoffs are in place. Installation warning: Hold only the edges of the printed circuit board assembly. Do not touch or press on the center of the printer hard disk. Doing so may cause damage.
Additional printer setup b Use the two provided screws to attach the printer hard disk mounting bracket. c Insert the plug of the printer hard disk interface cable into the receptacle of the controller board. Note: The plugs and receptacles are color‑coded.
Additional printer setup 27 Removing a printer hard disk Note: This task requires a flat‑head screwdriver. CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Additional printer setup 3 Remove the screws holding the printer hard disk in place. 4 Remove the printer hard disk. 5 Set aside the printer hard disk.
Additional printer setup 29 Installing hardware options Order of installation CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing.
Additional printer setup 2 Unpack the optional tray, and then remove all packing material. 3 Pull out the tray completely from the base. 4 Remove any packing material from inside the tray. 5 Insert the tray into the base. 6 Place the tray near the printer. 7 Align the optional tray with the caster base. Note: Make sure to lock the wheels of the caster base to secure the printer.
Additional printer setup 8 Align the printer with the tray, and then slowly lower the printer into place. Note: Optional trays lock together when stacked.
Additional printer setup 32 9 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.
Additional printer setup 33 Note: When the printer software and any optional trays are installed, you may need to manually add the options in the printer driver to make them available for print jobs. For more information, see “Updating available options in the printer driver” on page 36. To uninstall the optional trays, slide the latch on the right side of the printer toward the front of the printer until it clicks into place, and then remove stacked trays one at a time from the top to the bottom.
Additional printer setup 34 6 1 2 3 4 5 1 Use the To Parallel port Connect the printer to a computer. Note: This can also be used in installing an optional Internal Solutions Port (ISP). 2 USB port Attach an optional wireless network adapter. 3 Ethernet port Connect the printer to a network. 4 USB printer port Connect the printer to a computer. 5 Security slot Attach a lock that will secure the controller board.
Additional printer setup 35 Setting up the printer software Installing the printer software Notes: • If you installed the printer software on the computer before but need to reinstall the software, then uninstall the current software first. • Close all open software programs before installing the printer software. 1 Obtain a copy of the software installer package. • From the Software and Documentation CD that came with your printer. • From our Web site: Go to http://support.lexmark.
Additional printer setup In Windows 7 or earlier a Click or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe. c Press Enter, or click OK. In Macintosh Click the CD icon on the desktop. Note: D is the letter of your CD or DVD drive. 3 Click Install, and then follow the instructions on the computer screen.
Additional printer setup 37 For Macintosh users 1 From the Apple menu, navigate to either of the following: • System Preferences > Print & Scan > select your printer > Options & Supplies > Driver • System Preferences > Print & Fax > select your printer > Options & Supplies > Driver 2 Add any installed hardware options, and then click OK. Networking Notes: • Purchase a MarkNet N8350 wireless network adapter first before setting up the printer on a wireless network.
Additional printer setup 38 If you are using the Software and Documentation CD and the installation dialog does not appear, then do the following: In Windows 8 From the Search charm, type run, and then navigate to: Apps list > Run > type: D:\setup.exe > OK In Windows 7 or earlier a Click or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe. c Press Enter, or click OK. Note: D is the letter of your CD or DVD drive.
Additional printer setup 39 b Click +. c Click the IP tab. d Type the printer IP address in the address field, and then click Add. • For AppleTalk printing: Notes: – Make sure AppleTalk is activated on your printer. – This feature is supported only in Mac OS X version 10.5.
Additional printer setup 40 Notes: – If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility of the computer network adapter, and then look for the network name. If you cannot find the SSID or the security information for your network, then see the documentation that came with the access point, or contact your system support person.
Additional printer setup 41 Connecting the printer to a wireless network using the Wi-Fi Protected Setup Before connecting the printer to a wireless network, make sure that: • The access point (wireless router) is Wi‑Fi Protected Setup (WPS) certified or WPS‑compatible. For more information, see the documentation that came with your access point. • A wireless network adapter installed in your printer is attached and working properly.
Additional printer setup 42 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Network/Ports > Wireless. 3 Modify the settings to match the settings of your access point (wireless router).
Additional printer setup 43 In Windows 8 From the Search charm, type Run and then navigate to: Apps list > Run > type control printers > OK In Windows 7 or earlier a Click , or click Start and then click Run. b In the Start Search or Run dialog, type control printers. c Press Enter, or click OK. 3 To select the printer that has changed, do either of the following: • Press and hold the printer, and then select Printer properties.
Additional printer setup 44 Setting up serial printing Use serial printing to print when the computer is far from the printer or to print at a reduced speed. After installing the serial or communication (COM) port, configure the printer and the computer. Make sure you have connected the serial cable to the COM port on your printer. 1 Set the parameters in the printer. a From the printer control panel, navigate to the menu for the port settings.
Additional printer setup 45 In Windows 8 From the Search charm, type run and then navigate to: Apps list > Run > type devmgmt.msc > OK In Windows 7 or earlier 1 Click or click Start, and then click Run. 2 In the Start Search or Run dialog, type devmgmt.msc. 3 Press Enter or click OK. b Double‑click Ports (COM & LPT) to expand the list of available ports. c Do either of the following: • Press and hold the COM port where you attached the serial cable to your computer (example: COM1).
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 46 Using MS810n, MS810dn, MS811n, MS811dn, MS812dn Learning about the printer Printer configurations Basic model 1 2 4 3 1 Standard bin 2 Printer control panel 3 Multipurpose feeder 4 Standard 550‑sheet tray (Tray 1) Fully configured model CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using multiple input options.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 47 The following illustration shows the maximum number of optional finishers and trays that are supported by the printer. For more information on other configurations, visit http://support.lexmark.com.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 48 When using optional trays: • • • • Always use a caster base when the printer is configured with a 2100‑sheet tray. The 2100‑sheet tray must always be at the bottom of a configuration. A maximum of four optional trays may be configured with the printer. The optional 250‑ and 550‑sheet trays may be installed in any order.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 49 Understanding the colors of the Sleep button and indicator lights The colors of the Sleep button and indicator lights on the printer control panel signify a certain printer status or condition. Indicator light color and its corresponding printer status Indicator light Printer status Off The printer is off or in Hibernate mode. Blinking green The printer is warming up, processing data, or printing. Solid green The printer is on, but idle.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 50 Notes: • The smallest supported Universal size is 70 x 127 mm (2.76 x 5 inches) for one‑sided printing and 105 x 148 mm (4.13 x 5.83 inches) for two‑sided (duplex) printing. • The largest supported Universal size is 216 x 356 mm (8.5 x 14 inches) for one‑sided and two‑sided printing. • When printing on paper less than 210 mm (8.3 inches) wide, the printer may print at a reduced speed after a period of time to ensure the best print performance.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 51 2 Squeeze and slide the width guide to the correct position for the size of the paper being loaded until it clicks into place. 1 2 Note: Use the paper size indicators at the bottom of the tray to help position the guides.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 52 3 Unlock the length guide, and then squeeze and slide the guide to the correct position for the size of the paper being loaded. 1 2 3 Notes: • Lock the length guide for all paper sizes. • Use the paper size indicators at the bottom of the tray to help position the guides.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 53 4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 5 Load the paper stack with the printable side facedown. Note: Make sure the paper or envelope is loaded properly. • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 54 • Do not slide the paper into the tray. Load paper as shown in the illustration. • If you are loading envelopes, then make sure that the flap side is facing up and the envelopes are on the left side of the tray.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn • Make sure the paper is below the solid line, which is the maximum paper fill indicator. Warning—Potential Damage: Overfilling the tray can cause paper jams.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 56 • When using card stock, labels, or other types of specialty media, make sure the paper is below the dashed line, which is the alternate paper fill indicator. 6 For custom‑ or Universal‑size paper, adjust the paper guides to lightly touch the sides of the stack, and then lock the length guide. 7 Insert the tray. 8 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 57 Loading the 2100‑sheet tray CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed. 1 Pull out the tray. 2 Adjust the width and length guides. Loading A5‑size paper a Pull up and slide the width guide to the position for A5.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 58 b Squeeze and slide the length guide to the position for A5 until it clicks into place. 2 1 c Remove the A5 length guide from its holder. 1 d Insert the A5 length guide into its designated slot. Note: Press the A5 length guide until it clicks into place.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 59 Loading A4‑, letter‑, legal‑, oficio‑, and folio‑size paper a Pull up and slide the width guide to the correct position for the size of the paper being loaded.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 60 b If the A5 length guide is still attached to the length guide, then remove it from its place. If the A5 length guide is not attached, then proceed to step d. c Put the A5 length guide in its holder.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 61 d Squeeze the length guide and slide it to the correct position for the size of the paper being loaded until it clicks into place. 3 Flex and fan the sheets to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 4 Load the paper stack with the printable side facedown. Note: Make sure the paper is loaded properly.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 62 Without an optional staple finisher With an optional staple finisher C One‑sided printing AB C AB One‑sided printing C C Two‑sided printing AB AB Two‑sided printing • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn • Make sure the paper is below the maximum paper fill indicator. Warning—Potential Damage: Overfilling the tray can cause paper jams. 5 Insert the tray. Note: Press the paper stack down while inserting the tray.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 64 6 From the printer control panel, set the size and type in the Paper menu to match the paper loaded in the tray. Note: Set the correct paper size and type to avoid paper jams and print quality problems. Loading the multipurpose feeder 1 Pull down the multipurpose feeder door. Note: Do not load or close the multipurpose feeder while a job is printing.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 65 2 Pull the multipurpose feeder extender. LTR A4 A5 EX B5 EC Note: Guide the extender gently so that the multipurpose feeder is fully extended and open. 3 Slide the width guide to the correct position for the size of the paper being loaded. LT R A4 A5 EX EC B 5 Note: Use the paper size indicators on the bottom of the tray to help position the guides.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 66 LT R A 4 A 5 C E X E B 5 4 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. • Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface. Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 67 5 Load paper or specialty media. Note: Slide the stack gently into the multipurpose feeder until it comes to a stop. • Load only one size and type of paper or specialty media at a time. • Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled. • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 68 5 4 A B C E X E A 5 R T L • Load envelopes with the flap side down and on the left of the multipurpose feeder. Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives. These envelopes may severely damage the printer. • Make sure the paper or specialty media is below the maximum paper fill indicator. Warning—Potential Damage: Overfilling the feeder can cause paper jams.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 69 Linking and unlinking trays Linking and unlinking trays 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer control panel in the TCP/IP section under the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 3 Press 70 . 4 Press Custom Types, and then verify if the new custom paper type name has replaced the custom name. Assigning a custom paper type Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 71 For Macintosh users a Customize the settings in the Page Setup dialog if necessary: 1 With a document open, choose File > Page Setup. 2 Choose a paper size or create a custom size to match the paper loaded. 3 Click OK. b Customize the settings in the Page Setup dialog if necessary: 1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn Recommended flash drives • Lexar JumpDrive FireFly (512MB and 1GB) • SanDisk Cruzer Micro (512MB and 1GB) • Sony Micro Vault Classic (512MB and 1GB) 72 File type Documents: • .pdf • .xps Images: • • • • • • • • .dcx .gif .jpeg or .jpg .bmp .pcx .tiff or .tif .png .fls Printing from a flash drive Notes: • Before printing an encrypted PDF file, you will be prompted to enter the file password from the printer control panel.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 73 • If you insert the flash drive while the printer is processing other print jobs, then Busy appears. After these print jobs are processed, you may need to view the held jobs list to print documents from the flash drive. Warning—Potential Damage: Do not touch the printer or the flash drive in the area shown while actively printing, reading, or writing from the memory device. Loss of data can occur.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn Print job type Description Max Invalid PIN Limits the number of times an invalid PIN can be entered. 74 Note: When the limit is reached, the print jobs for that user name and PIN are deleted. Confidential Job Expiration Lets you hold print jobs in the computer until you enter the PIN from the printer control panel. Note: The PIN is set from the computer. It must be four digits, using the numbers 0–9.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 75 For Macintosh users 1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options. 2 From the print options or Copies & Pages pop‑up menu, choose Job Routing. 3 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential print job, also enter a four‑digit PIN. 4 Click OK or Print.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 76 Canceling a print job from the computer For Windows users 1 Open the printers folder. In Windows 8 From the Search charm, type Run, and then navigate to: Apps list > Run > type control printers > OK In Windows 7 or earlier a Click , or click Start and then click Run. b In the Start Search or Run dialog, type control printers. c Press Enter, or click OK. 2 Double‑click the printer icon. 3 Select the print job you want to cancel. 4 Click Delete.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 77 Configuring supply notifications from the Embedded Web Server You can determine how you would like to be notified when supplies run nearly low, low, very low, or reach their end‑of‑life by setting the selectable alerts. Notes: • Selectable alerts can be set on the toner cartridge, imaging unit, and maintenance kit. • All selectable alerts can be set for nearly low, low, and very low supply conditions.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 78 • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Configuration > Other Settings tab > Security > Confidential Print Setup. 3 Modify the settings: • Set a maximum number of PIN entry attempts. When a user exceeds a specific number of PIN entry attempts, all of the jobs for that user are deleted. • Set an expiration time for confidential print jobs.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 79 Printing a network setup page If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration. 1 From the printer control panel, navigate to: > Settings > > Reports > > Network Setup Page > 2 Check the first section of the network setup page, and then confirm that the status is Connected.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 80 • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > General Settings > Eco‑Mode. 3 Select a setting. Use To Off Use the factory default settings for all settings associated with Eco‑Mode. Notes: • Settings that were changed when other modes were selected are reset to the factory default settings. • Off supports the performance specifications of the printer.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 81 Use To On Reduce printer noise. Notes: • Print jobs process at a reduced speed. • Printer engine motors do not start until a document is ready to print. There is a short delay before the first page is printed. • The alarm control and cartridge alarm sounds are turned off. • The printer ignores the Advance Start command. Off Use factory default settings. Note: This setting supports the performance specifications of the printer. 3 Press .
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 82 Using Hibernate mode Hibernate is an ultra‑low‑power operating mode. When operating in Hibernate mode, all other systems and devices are powered down safely. Notes: • Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of the Sleep button wakes the printer from Hibernate mode. • If the printer is in Hibernate mode, then the Embedded Web Server is disabled.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 83 Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > General Settings. 3 In the Screen Brightness field, enter the brightness percentage you want for the display. 4 Click Submit.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 84 Securing the printer Using the security lock feature The printer is equipped with a security lock feature. When a lock compatible with most laptop computers is attached, the printer is locked. When locked, the controller board shield and the controller board cannot be removed. Attach a security lock to the printer in the location shown.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 85 • The printer is being removed from your premises for service. • The printer is being sold to another organization. Disposing of a printer hard disk Note: Some printer models may not have a printer hard disk installed. In high‑security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer hard disk cannot be accessed when the printer—or its hard disk—is removed from your premises.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 86 Erasing printer hard disk memory Note: Some printer models may not have a printer hard disk installed. Configuring Disk Wiping in the printer menus lets you remove residual confidential material left by print jobs by securely overwriting files that have been marked for deletion. Using the printer control panel 1 Turn off the printer. 2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.
Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 87 Notes: • Enabling disk encryption will erase the content of the printer hard disk. • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks. Using the printer control panel 1 Turn off the printer. 2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.
Using MS810de 88 Using MS810de Learning about the printer Printer configurations Basic model 1 2 4 3 1 Standard bin 2 Printer control panel 3 Multipurpose feeder 4 Standard 550‑sheet tray (Tray 1) Fully configured model CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using multiple input options.
Using MS810de 89 The following illustration shows the maximum number of optional finishers and trays that are supported by the printer. For more information on other configurations, visit www.lexmark.com/multifunctionprinters.
Using MS810de 90 • When using optional trays: – Always use a caster base when the printer is configured with a 2100‑sheet tray. – The 2100‑sheet tray must always be at the bottom of a configuration. – A maximum of four optional trays may be configured with the printer. – The optional 250‑ and 550‑sheet trays may be installed in any order. Using the printer control panel 1 2 7 Use the 6 3 4 5 To 1 Display 2 Home button Go to the home screen.
Using MS810de 91 Indicator light color and its corresponding printer status Indicator light Printer status Off The printer is off or in Hibernate mode. Blinking green The printer is warming up, processing data, or printing. Solid green The printer is on, but idle. Blinking red The printer requires user intervention. Sleep button light color and its corresponding printer status Sleep button light Printer status Off The printer is off, idle or in Ready state.
Using MS810de Touch 4 92 To USB View, select, or print photos and documents from a flash drive. Note: This icon appears only when you return to the home screen while a memory card or flash drive is connected to the printer. 5 Menus Access printer menus. Note: These menus are available only when the printer is in ready state. 6 Status message bar • Show the current printer status such as Ready or Busy. • Show printer conditions such as Imaging unit low or Cartridge Low.
Using MS810de 93 2 1 5 Touch the To 1 Radio button Select or clear an item. 2 Up arrow Scroll up. 3 Down arrow Scroll down. 4 Accept button Save a setting. 5 Cancel button 4 3 • Cancel an action or a selection. • Return to the previous screen. Other touch-screen buttons Touch To Return to the home screen. Open a context-sensitive Help dialog on the printer control panel. Scroll to the left. Scroll to the right.
Using MS810de 94 Setting up and using the home screen applications Notes: • Your home screen may vary, depending on your home screen customization settings, administrative setup, and active embedded applications. Some applications are supported only in select printer models. • There may be additional solutions and applications available for purchase. For more information, visit www.lexmark.com or inquire at your point of purchase.
Using MS810de 95 Finding the IP address of the printer Note: Make sure your printer is connected to a network or to a print server. You can find the printer IP address: • From the top left corner of the printer home screen. • From the TCP/IP section in the Network/Ports menu. • By printing a network setup page or menu settings page, and then finding the TCP/IP section. Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Using MS810de 96 Activating the home screen applications Finding information about the home screen applications Your printer comes with preinstalled home screen applications. Before you can use these applications, you must first activate and set up these applications using the Embedded Web Server. For more information on accessing the Embedded Web Server, see “Accessing the Embedded Web Server” on page 95.
Using MS810de 97 1 Open a Web browser, and then type the printer IP address in the address field. Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. 2 Click Settings > Apps > Apps Management > Forms and Favorites. 3 Click Add, and then customize the settings. Notes: • See the mouse-over help beside each field for a description of the setting.
Using MS810de 98 Exporting and importing a configuration You can export configuration settings into a text file, and then import the file to apply the settings to other printers. 1 Open a Web browser, and then type the printer IP address in the address field. Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Using MS810de 99 Configuring Universal paper settings The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus. Notes: • The smallest supported Universal size is 70 x 127 mm (2.76 x 5 inches) for one‑sided printing and 105 x 148 mm (4.13 x 5.83 inches) for two‑sided (duplex) printing. • The largest supported Universal size is 216 x 356 mm (8.5 x 14 inches) for one‑sided and two‑sided printing.
Using MS810de 100 2 Squeeze and slide the width guide to the correct position for the size of the paper being loaded until it clicks into place. 1 2 Note: Use the paper size indicators at the bottom of the tray to help position the guides.
Using MS810de 101 3 Unlock the length guide, and then squeeze and slide the guide to the correct position for the size of the paper being loaded. 1 2 3 Notes: • Lock the length guide for all paper sizes. • Use the paper size indicators at the bottom of the tray to help position the guides.
Using MS810de 102 4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 5 Load the paper stack with the printable side facedown. Note: Make sure the paper or envelope is loaded properly. • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.
Using MS810de 103 • Do not slide the paper into the tray. Load paper as shown in the illustration. • If you are loading envelopes, then make sure that the flap side is facing up and the envelopes are on the left side of the tray.
Using MS810de • Make sure the paper is below the solid line, which is the maximum paper fill indicator. Warning—Potential Damage: Overfilling the tray can cause paper jams.
Using MS810de 105 • When using card stock, labels, or other types of specialty media, make sure the paper is below the dashed line, which is the alternate paper fill indicator. 6 For custom‑ or Universal‑size paper, adjust the paper guides to lightly touch the sides of the stack, and then lock the length guide. 7 Insert the tray. 8 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.
Using MS810de 106 Loading the 2100‑sheet tray CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed. 1 Pull out the tray. 2 Adjust the width and length guides. Loading A5‑size paper a Pull up and slide the width guide to the position for A5.
Using MS810de 107 b Squeeze and slide the length guide to the position for A5 until it clicks into place. 2 1 c Remove the A5 length guide from its holder. 1 d Insert the A5 length guide into its designated slot. Note: Press the A5 length guide until it clicks into place.
Using MS810de 108 Loading A4‑, letter‑, legal‑, Oficio‑, and Folio‑size paper a Pull up and slide the width guide to the correct position for the size of the paper being loaded.
Using MS810de 109 b If the A5 length guide is still attached to the length guide, then remove it from its place. If the A5 length guide is not attached, then proceed to step d. c Put the A5 length guide in its holder.
Using MS810de 110 d Squeeze the length guide and slide it to the correct position for the size of the paper being loaded until it clicks into place. 3 Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 4 Load the paper stack with the printable side facedown. Note: Make sure the paper is loaded properly.
Using MS810de 111 Without an optional staple finisher With an optional staple finisher C One‑sided printing AB C AB One‑sided printing C C Two‑sided printing AB AB Two‑sided printing • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.
Using MS810de • Make sure the paper is below the maximum paper fill indicator. Warning—Potential Damage: Overfilling the tray can cause paper jams. 5 Insert the tray. Note: Press the paper stack down while inserting the tray.
Using MS810de 113 6 From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray. Note: Set the correct paper size and type to avoid paper jams and print quality problems. Loading the multipurpose feeder 1 Pull down the multipurpose feeder door. Note: Do not load or close the multipurpose feeder while a job is printing.
Using MS810de 114 2 Pull the multipurpose feeder extender. LTR A4 A5 EX B5 EC Note: Guide the extender gently so that the multipurpose feeder is fully extended and open. 3 Slide the width guide to the correct position for the size of the paper being loaded. LT R A4 A5 EX EC B 5 Note: Use the paper size indicators on the bottom of tray to help position the guides.
Using MS810de 115 LT R A 4 A 5 C E X E B 5 4 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. • Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface. Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them.
Using MS810de 116 5 Load the paper or specialty media. Note: Slide the stack gently into the multipurpose feeder until it comes to a stop. • Load only one size and type of paper or specialty media at a time. • Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled. • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.
Using MS810de 117 5 4 A B C E X E A 5 R T L • Load envelopes with the flap side down and on the left of the multipurpose feeder. Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives. These envelopes may severely damage the printer. • Make sure the paper or specialty media is below the maximum paper fill indicator. Warning—Potential Damage: Overfilling the feeder can cause paper jams.
Using MS810de 118 Linking and unlinking trays Linking and unlinking trays 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Paper Menu.
Using MS810de 3 Touch 119 . 4 Touch Custom Types, and then verify that the new custom paper type name has replaced the custom name. Assigning a custom paper type Using the Embedded Web Server Assign a custom paper type name to a tray when linking or unlinking trays. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.
Using MS810de 120 Printing a document 1 From the Paper menu on the printer control panel, set the paper type and size to match the paper loaded. 2 Send the print job: For Windows users a b c d With a document open, click File > Print. Click Properties, Preferences, Options, or Setup. Adjust the settings, if necessary. Click OK > Print. For Macintosh users a Customize the settings in the Page Setup dialog: 1 With a document open, choose File > Page Setup.
Using MS810de 121 Printing from a flash drive Supported flash drives and file types Notes: • High‑speed USB flash drives must support the full‑speed standard. Low-speed USB devices are not supported. • USB flash drives must support the File Allocation Table (FAT) system. Devices formatted with New Technology File System (NTFS) or any other file system are not supported.
Using MS810de 122 Printing from a flash drive Notes: • Before printing an encrypted PDF file, you will be prompted to type the file password from the printer control panel. • You cannot print files for which you do not have printing permissions. 1 Insert a flash drive into the USB port. Notes: • A flash drive icon appears on the printer home screen when a flash drive is inserted.
Using MS810de 123 3 Touch the arrows to specify the number of copies for printing, and then touch Print. Notes: • Do not remove the flash drive from the USB port until the document has finished printing. • If you leave the flash drive in the printer after leaving the initial USB menu screen, then touch Held Jobs on the home screen to print files from the flash drive.
Using MS810de 124 Printing confidential and other held jobs Note: Confidential and Verify print jobs are automatically deleted from memory after printing. Repeat and Reserve jobs are held in the printer until you delete them. For Windows users 1 With a document open, click File > Print. 2 Click Properties, Preferences, Options, or Setup. 3 Click Print and Hold. 4 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name.
Using MS810de 125 Printing a directory list A directory list shows the resources stored in a flash memory or in the printer hard disk. From the home screen, navigate to: > Reports > Print Directory Canceling a print job Canceling a print job from the printer control panel 1 From the printer control panel, touch Cancel Jobs or press on the keypad. 2 Touch the print job you want to cancel, and then touch Delete Selected Jobs.
Using MS810de 126 Managing your printer Finding advanced networking and administrator information This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server Administrator's Guide at http://support.lexmark.com. Checking the virtual display 1 Open a Web browser, and then type the printer IP address in the address field.
Using MS810de 127 Notification Description Warning The printer displays the warning message and generates an e‑mail about the status of the supply. The printer does not stop when the supply condition is reached. Continuable Stop1 The printer stops processing jobs when the supply condition is reached, and the user needs to press a button to continue printing. Non Continuable Stop1,2 The printer stops processing jobs when the supply condition is reached.
Using MS810de 128 5 Type the IP addresses of the source and target printers. Note: If you want to add or remove target printers, then click Add Target IP or Remove Target IP. 6 Click Copy Printer Settings. Printing a menu settings page From the home screen, navigate to: > Reports > Menu Settings Page Printing a network setup page If the printer is attached to a network, then print a network setup page to verify the network connection.
Using MS810de 129 Saving energy Using Eco‑Mode 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > General Settings > Eco‑Mode. 3 Select a setting.
Using MS810de 130 Use To On Reduce printer noise. Notes: • Print jobs process at a reduced speed. • Printer engine motors do not start until a document is ready to print. There is a short delay before the first page is printed. • The alarm control and cartridge alarm sounds are turned off. • The printer ignores the Advance Start command. Off Use factory default settings. Note: This setting supports the performance specifications of the printer. 4 Click Submit.
Using MS810de 131 Using Hibernate Mode Hibernate is an ultra‑low power operating mode. When operating in Hibernate mode, the printer is essentially off, and all other systems and devices are powered down safely. Note: The Hibernate and Sleep modes can be scheduled. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen.
Using MS810de 132 Using the printer control panel 1 From the home screen, navigate to: > Settings > General Settings > Screen Brightness 2 In the Screen Brightness field, enter the brightness percentage you want for the display. 3 Touch . Restoring factory default settings If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings. For more information, see “Printing a menu settings page” on page 128.
Using MS810de 133 Statement of Volatility Your printer contains various types of memory that can store device and network settings, and user data. Type of memory Description Volatile memory Your printer uses standard random access memory (RAM) to temporarily buffer user data during simple print jobs. Non-volatile memory Your printer may use two forms of non-volatile memory: EEPROM and NAND (flash memory).
Using MS810de 134 Erasing non‑volatile memory Erase individual settings, device and network settings, security settings, and embedded solutions by following these steps: 1 Turn off the printer. 2 Hold down 2 and 6 on the keypad while turning the printer on. Release the buttons only when the screen with the progress bar appears. The printer performs a power-on sequence, and then the Configuration menu appears.
Using MS810de 135 Configuring printer hard disk encryption Enable hard disk encryption to prevent loss of sensitive data in the event the printer or its hard disk is stolen. Note: Some printer models may not have a printer hard disk installed. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.
Using MS810de 136 Finding printer security information In high-security environments, you may need to take additional steps to make sure that confidential data stored in the printer cannot be accessed. For more information, visit the Lexmark security Web page or see the Embedded Web Server Administrator’s Guide. 1 Go to http://support.lexmark.com, and then navigate to: Support & Downloads > Tech Library > Manuals & Guides 2 Type Embedded Web Server in the keyword field, and then click Filter.
Using MS812de 137 Using MS812de Learning about the printer Printer configurations Basic model 1 2 4 3 1 Standard bin 2 Printer control panel 3 Multipurpose feeder 4 Standard 550‑sheet tray (Tray 1) Fully configured model CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using multiple input options.
Using MS812de 138 The following illustration shows the maximum number of optional finishers and trays that are supported by the printer. For more information on other configurations, visit www.lexmark.com/multifunctionprinters.
Using MS812de 139 • When using optional trays: – Always use a caster base when the printer is configured with a 2100‑sheet tray. – The 2100‑sheet tray must always be at the bottom of a configuration. – A maximum of four optional trays may be configured with the printer. – The optional 250‑ and 550‑sheet trays may be installed in any order. Using the printer control panel 1 6 7 Use the 3 2 4 5 To 1 Display 2 Home button Go to the home screen.
Using MS812de 140 Indicator light color and its corresponding printer status Indicator light Printer status Off The printer is off or in Hibernate mode. Blinking green The printer is warming up, processing data, or printing. Solid green The printer is on, but idle. Blinking red The printer requires user intervention. Sleep button light color and its corresponding printer status Sleep button light Printer status Off The printer is off, idle or in Ready state.
Using MS812de 5 141 Touch To Menus Access printer menus. Note: These menus are available only when the printer is in Ready state. 6 Status message bar • Show the current printer status such as Ready or Busy. • Show printer conditions such as Imaging unit low or Cartridge Low. • Show intervention messages and the instructions on how to clear them. 7 Status/Supplies • Show a printer warning or error message whenever the printer requires intervention to continue processing.
Using MS812de 142 2 1 8 Touch To 1 Left arrow Scroll to the left. 2 Right arrow Scroll to the right. 3 Up arrow 4 Down arrow Scroll down. 5 Submit Submit changes made in the printer settings. 6 Back Return to the previous screen. 7 Home Return to the home screen. Scroll up.
Using MS812de 8 143 Touch To Tips Open a context-sensitive Help dialog on the printer control panel. Other touch-screen buttons Touch To Accept Save settings. Cancel • Cancel an action or a selection. • Leave a screen and return to the previous screen without saving changes. Increase Select a higher value. Decrease Select a lower value. Exit Leave the current screen. Search Search current held jobs. Warning View a warning or error message.
Using MS812de 144 Setting up and using the home screen applications Notes: • Your home screen may vary, depending on your home screen customization settings, administrative setup, and active embedded applications. Some applications are supported only in select printer models. • There may be additional solutions and applications available for purchase. For more information, visit www.lexmark.com or inquire at your point of purchase.
Using MS812de 145 You can find the printer IP address: • From the top left corner of the printer home screen. • From the TCP/IP section in the Network/Ports menu. • By printing a network setup page or menu settings page, and then finding the TCP/IP section. Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Using MS812de 146 For more information on configuring and using the home screen applications, do the following: 1 Go to http://support.lexmark.com, and then do either of the following: • Click Business Solutions, and then select the name of the application. • Click Software and Solutions, and then select either of the following: – Scan to Network—Find information about the Scan to Network application. – Other Applications—Find information about the other applications.
Using MS812de 147 • To make sure the location settings of the bookmark are correct, type the correct IP address of the host computer where the bookmark is located. For more information on obtaining the IP address of the host computer, see “Finding the IP address of the computer” on page 94. • Make sure the printer has access rights to the folder where the bookmark is located. 4 Click Apply.
Using MS812de 148 Exporting and importing a configuration You can export configuration settings into a text file, and then import the file to apply the settings to other printers. 1 Open a Web browser, and then type the printer IP address in the address field. Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Using MS812de 149 Notes: • The paper size is automatically set according to the position of the paper guides in each tray except the multipurpose feeder. • The paper size for the multipurpose feeder must be set manually from the Paper Size menu. • The paper type must be set manually for all trays that do not contain plain paper. Configuring Universal paper settings Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus.
Using MS812de 150 2 Squeeze and slide the width guide to the correct position for the size of the paper being loaded until it clicks into place. 1 2 Note: Use the paper size indicators at the bottom of the tray to help position the guides.
Using MS812de 151 3 Unlock the length guide, and then squeeze and slide the guide to the correct position for the size of the paper being loaded. 1 2 3 Notes: • Lock the length guide for all paper sizes. • Use the paper size indicators at the bottom of the tray to help position the guides.
Using MS812de 152 4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 5 Load the paper stack with the printable side facedown. Note: Make sure the paper or envelope is loaded properly. • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.
Using MS812de 153 Without an optional staple finisher With an optional staple finisher C AB AB C Two‑sided printing Two‑sided printing • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray. One‑sided printing Two‑sided printing AB C Note: If the holes on the long edge of the paper are on the left side of the tray, then a jam may occur. • Do not slide the paper into the tray.
Using MS812de 154 • If you are loading envelopes, then make sure that the flap side is facing up and the envelopes are on the left side of the tray. • Make sure the paper is below the solid line, which is the maximum paper fill indicator. Warning—Potential Damage: Overfilling the tray can cause paper jams.
Using MS812de 155 • When using card stock, labels, or other types of specialty media, make sure the paper is below the dashed line, which is the alternate paper fill indicator. 6 For custom‑ or Universal‑size paper, adjust the paper guides to lightly touch the sides of the stack, and then lock the length guide. 7 Insert the tray. 8 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.
Using MS812de 156 Loading the 2100‑sheet tray CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed. 1 Pull out the tray. 2 Adjust the width and length guides. Loading A5‑size paper a Pull up and slide the width guide to the position for A5.
Using MS812de 157 b Squeeze and slide the length guide to the position for A5 until it clicks into place. 2 1 c Remove the A5 length guide from its holder. 1 d Insert the A5 length guide into its designated slot. Note: Press the A5 length guide until it clicks into place.
Using MS812de 158 Loading A4‑, letter‑, legal‑, oficio‑, and folio‑size paper a Pull up and slide the width guide to the correct position for the size of the paper being loaded.
Using MS812de 159 b If the A5 length guide is still attached to the length guide, then remove it from its place. If the A5 length guide is not attached, then proceed to step d. c Put the A5 length guide in its holder.
Using MS812de 160 d Squeeze the length guide and slide it to the correct position for the size of the paper being loaded until it clicks into place. 3 Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 4 Load the paper stack with the printable side facedown. Note: Make sure the paper is loaded properly.
Using MS812de 161 Without an optional staple finisher With an optional staple finisher C One‑sided printing AB C AB One‑sided printing C C Two‑sided printing AB AB Two‑sided printing • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.
Using MS812de • Make sure the paper is below the maximum paper fill indicator. Warning—Potential Damage: Overfilling the tray can cause paper jams. 5 Insert the tray. Note: Press the paper stack down while inserting the tray.
Using MS812de 163 6 From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded. Note: Set the correct paper size and type to avoid paper jams and print quality problems. Loading the multipurpose feeder 1 Pull down the multipurpose feeder door. Note: Do not load or close the multipurpose feeder while a job is printing.
Using MS812de 164 2 Using the handle, pull the multipurpose feeder extender. LTR A4 A5 EX B5 EC Note: Guide the extender gently so that the multipurpose feeder is fully extended and open. 3 Slide the width guide to the correct position for the size of the paper being loaded. LT R A4 A5 EX EC B 5 Note: Use the paper size indicators on the bottom of tray to help position the guides.
Using MS812de 165 LT R A 4 A 5 C E X E B 5 4 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. • Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface. Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them.
Using MS812de 166 5 Load the paper or specialty media. Note: Slide the stack gently into the multipurpose feeder until it comes to a stop. • Load only one size and type of paper or specialty media at a time. • Make sure the paper fits loosely in the multipurpose feeder, lies flat and is not bent or wrinkled. • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.
Using MS812de 167 5 4 A B C E X E A 5 R T L • Load envelopes with the flap side down and on the left of the multipurpose feeder. Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives. These envelopes may severely damage the printer. • Make sure the paper or specialty media is below the maximum paper fill indicator. Warning—Potential Damage: Overfilling the feeder can cause paper jams.
Using MS812de 168 Linking and unlinking trays Linking and unlinking trays 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Paper Menu.
Using MS812de 169 3 Touch Submit. 4 Touch Custom Types, and then verify if the new custom paper type name has replaced the custom name. Assigning a custom paper type Using the Embedded Web Server Assign a custom paper type name to a tray when linking or unlinking trays. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.
Using MS812de Printing a document 1 From the printer control panel, set the paper type and size to match the paper loaded. 2 Send the print job: For Windows users a b c d With a document open, click File > Print. Click Properties, Preferences, Options, or Setup. Adjust the settings, if necessary. Click OK > Print. For Macintosh users a Customize the settings in the Page Setup dialog: 1 With a document open, choose File > Page Setup.
Using MS812de 171 Printing from a flash drive Supported flash drives and file types Notes: • High‑speed USB flash drives must support the full‑speed standard. Low-speed USB devices are not supported. • USB flash drives must support the File Allocation Table (FAT) system. Devices formatted with New Technology File System (NTFS) or any other file system are not supported.
Using MS812de 172 Printing from a flash drive Notes: • Before printing an encrypted PDF file, you will be prompted to type the file password from the printer control panel. • You cannot print files for which you do not have printing permissions. 1 Insert a flash drive into the USB port. Notes: • A flash drive icon appears on the printer home screen when a flash drive is inserted.
Using MS812de 173 3 Touch the arrows to specify the number of copies for printing, and then touch Print. Notes: • Do not remove the flash drive from the USB port until the document has finished printing. • If you leave the flash drive in the printer after leaving the initial USB menu screen, then touch Held Jobs on the home screen to print files from the flash drive.
Using MS812de 174 3 Click Print and Hold. 4 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential print job, also enter a four‑digit PIN. 5 Click OK or Print. 6 From the printer home screen, release the print job.
Using MS812de 175 Canceling a print job Canceling a print job from the printer control panel 1 Touch Cancel Jobs on the printer control panel, or press on the keypad. 2 Touch the print job you want to cancel, and then touch Delete Selected Jobs. Canceling a print job from the computer For Windows users 1 Open the printers folder.
Using MS812de 176 Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Check the virtual display that appears in the top left corner of the screen. The virtual display works as an actual display would work on a printer control panel.
Using MS812de 177 Modifying confidential print settings Note: This feature is available only in network printers or printers connected to print servers. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly.
Using MS812de 178 Printing a network setup page If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration. 1 From the home screen, navigate to: > Reports > Network Setup Page 2 Check the first section of the network setup page and confirm that the status is Connected.
Using MS812de 179 • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > General Settings > Eco‑Mode. 3 Select a setting. Use To Off Use the factory default settings for all settings associated with Eco‑Mode. Notes: • Settings that were changed when other modes were selected are reset to the factory default settings. • Off supports the performance specifications of the printer. Energy Reduce energy use, especially when the printer is idle.
Using MS812de 180 Use To On Reduce printer noise. Notes: • Print jobs process at a reduced speed. • Printer engine motors do not start until a document is ready to print. There is a short delay before the first page is printed. • The alarm control and cartridge alarm sounds are turned off. • The printer will ignore the Advance Start command. Off Use factory default settings. Note: This setting supports the performance specifications of the printer. 4 Click Submit.
Using MS812de 181 Using Hibernate mode Hibernate is an ultra‑low‑power operating mode. When operating in Hibernate mode, the printer is essentially off, and all other systems and devices are turned off safely. Note: The Hibernate and Sleep modes can be scheduled. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen.
Using MS812de 182 Restoring factory default settings If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings. For more information, see “Printing a menu settings page” on page 177. If you want a more comprehensive method of restoring the printer factory default settings, then perform the Wipe All Settings option. For more information, see “Erasing non‑volatile memory” on page 183.
Using MS812de 183 Type of memory Description Volatile memory Your printer uses standard random access memory (RAM) to temporarily buffer user data during simple print jobs. Non-volatile memory Your printer may use two forms of non-volatile memory: EEPROM and NAND (flash memory). Both types are used to store the operating system, device settings, network information, bookmark settings, and embedded solutions. Hard disk memory Some printers have a hard disk drive installed.
Using MS812de 184 3 Touch Wipe All Settings. The printer restarts several times during this process. Note: Wipe All Settings securely removes device settings, solutions, jobs, and passwords from the printer memory. 4 Touch Back > Exit Config Menu. The printer will perform a power‑on reset, and then return to normal operating mode. Erasing printer hard disk memory Note: Some printer models may not have a printer hard disk installed.
Using MS812de 185 Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Security > Disk Encryption. Note: Disk Encryption appears in the Security Menu only when a formatted, non‑defective printer hard disk is installed. 3 From the Disk encryption menu, select Enable.
Using MS812de 3 Click Embedded Web Server to launch the document.
Paper and specialty media guide 187 Paper and specialty media guide Notes: • • • • Make sure the paper size, type, and weight are set correctly on the computer or printer control panel. Flex, fan, and straighten specialty media before loading it. The printer may print at a reduced speed to prevent damage to the fuser. For more information on card stock and labels, see the Card Stock & Label Guide on the Lexmark Web site at http://support.lexmark.com.
Paper and specialty media guide 188 – Have bent corners. – Have rough, cockle, or laid finishes. • Adjust the width guides to fit the width of the envelopes. • Before loading the envelopes on the tray, flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level surface. Note: A combination of high humidity (over 60%) and high printing temperature may wrinkle or seal envelopes.
Paper and specialty media guide 189 Weight The printer trays and multipurpose feeder can automatically feed paper weights between 60–176 g/m2 (16–47‑lb) grain long paper. The 2100‑sheet tray can automatically feed paper weights up to 60–135 g/m2 (16–36‑lb) grain long paper. Paper lighter than 60 g/m2 (16 lb) might not be stiff enough to feed properly, and may cause jams. Note: Two‑sided printing is supported for 60–176 g/m2 (16–47‑lb) paper. Curl Curl is the tendency for paper to curl at its edges.
Paper and specialty media guide 190 • Do not mix paper sizes, types, or weights in the same tray; mixing results in jams. • Do not use coated papers unless they are specifically designed for electrophotographic printing. Selecting preprinted forms and letterhead • • • • Use grain long for 60–90‑g/m2 (16–24‑lb) paper. Use only forms and letterhead printed using an offset lithographic or engraved printing process. Avoid paper with rough or heavily textured surfaces.
Paper and specialty media guide 191 customers minimize printing and copying waste. In addition, the company encourages purchasing paper from suppliers who demonstrate their commitment to sustainable forestry practices. Lexmark does not endorse specific suppliers, although a converter’s product list for special applications is maintained. However, the following paper choice guidelines will help alleviate the environmental impact of printing: 1 Minimize paper consumption.
Paper and specialty media guide 192 Supported paper sizes, types, and weights The following tables provide information on standard and optional paper sources and the types of paper they support. Note: For an unlisted paper size, select the closest larger listed size. Paper types and weights supported by the printer The printer engine supports 60–176‑g/m2 (16–47‑lb) paper weights.
Paper and specialty media guide Paper size1 Dimensions JIS B5 182 x 257 mm (7.2 x 10.1 in.) Letter 216 x 279 mm (8.5 x 11 in.) Legal 216 x 356 mm (8.5 x 14 in.) Executive 184 x 267 mm (7.3 x 10.5 in.) Oficio 216 x 340 mm (8.5 x 13.4 in.) Folio 216 x 330 mm (8.5 x 13 in.) Statement 140 x 216 mm (5.5 x 8.5 in.) Universal3 105 x 148 mm to 216 x 356 mm (4.13 x 5.83 in. to 8.5 x 14 in.) 70 x 127 mm to 216 x 356 mm (2.76 x 5 to 8.5 x 14 in.
Paper and specialty media guide 194 Paper size1 Dimensions Other Envelope 98 x 162 mm (3.9 x 6.4 in.) to 176 x 250 mm (6.9 x 9.8 in.) Standard or Optional optional 250‑ or 2100‑sheet tray 550‑sheet tray Multipurpose feeder Duplex X X 1 If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that correspond to the position of the length guide in the tray from the Paper Size/Type menu.
Paper and specialty media guide 195 Supported paper types and weights Paper type Plain Paper Paper weight 90–176 g/m2 (24–47 lb) 4‑bin mailbox Output expander and high‑capacity output expander X Staple finisher Staple, hole punch finisher X X 60–90 g/m2 (16–24 lb) Card Stock 163 g/m2 (90 Ib) 199 g/m2 (110 Ib) Transparency2 146 g/m2 (39 Ib) Recycled 90–176 g/m2 (24–47 lb) X X 1 X X 1 X 1 1 X X X X X X X X X X X X X X X X X X X X X 60–90 g/m2 (16–24 lb) Paper la
Paper and specialty media guide Paper type Paper weight Colored Paper 90–176 g/m2 (24–47 lb) 196 4‑bin mailbox Output expander and high‑capacity output expander X Staple finisher Staple, hole punch finisher X X 60–90 g/m2 (16–24 lb) 1 The finisher stacks the paper but does not staple or punch holes in it. 2 Print on transparencies by batches of only up to 20 to prevent them from sticking together. For more information, see “Tips on using transparencies” on page 188.
Understanding the printer menus 197 Understanding the printer menus Menus list Paper Menu Reports Network/Ports Default Source Paper Size/Type Menu Settings Page Device Statistics Active NIC Configure MP Stapler Test Standard USB Substitute Size Paper Texture Network Setup Page 1 Profiles List Parallel [x] Serial [x] Paper Weight Print Fonts SMTP Setup Paper Loading Print Directory Custom Types Custom Names Standard Network 2 Asset Report 3 Custom Bin Names 3 Universal Setup Bin Setup
Understanding the printer menus 198 Paper menu Default Source menu Use To Default Source Tray [x] MP Feeder Manual Paper Manual Envelope Set a default paper source for all print jobs. Notes: • Tray 1 (standard tray) is the factory default setting. • From the Paper menu, set Configure MP to "Cassette" for MP Feeder to appear as a menu setting. • If two trays contain paper of the same size and type, and the trays have the same settings, then the trays are automatically linked.
Understanding the printer menus 199 Use To Tray [x] Type Plain Paper Card Stock Transparency Recycled Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x] Specify the paper type loaded in each tray.
Understanding the printer menus 200 Use To MP Feeder Type Plain Paper Card Stock Transparency Recycled Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x] Specify the paper type loaded in the multipurpose feeder. Manual Paper Size A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal Specify the paper size being manually loaded.
Understanding the printer menus 201 Use To Manual Envelope Size 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope Specify the envelope size being manually loaded. Manual Envelope Type Envelope Rough Envelope Custom Type [x] Specify the envelope type being manually loaded. Note: 10 Envelope is the U.S. factory default setting. DL Envelope is the international factory default setting. Note: Envelope is the factory default setting.
Understanding the printer menus Paper Texture menu Use To Plain Texture Smooth Normal Rough Specify the relative texture of the plain paper loaded in a specific tray. Card Stock Texture Smooth Normal Rough Specify the relative texture of the card stock loaded in a specific tray. Transparency Texture Smooth Normal Rough Specify the relative texture of the transparencies loaded in a specific tray.
Understanding the printer menus 203 Use To Preprinted Texture Smooth Normal Rough Specify the relative texture of the preprinted paper loaded in a specific tray. Colored Texture Smooth Normal Rough Specify the relative texture of the colored paper loaded in a specific tray. Light Texture Smooth Normal Rough Specify the relative texture of the light paper loaded in a specific tray. Heavy Texture Smooth Normal Rough Specify the relative texture of the heavy paper loaded in a specific tray.
Understanding the printer menus 204 Use To Labels Weight Light Normal Heavy Specify the relative weight of the labels loaded. Vinyl Labels Weight Light Normal Heavy Specify the relative weight of the vinyl labels loaded. Bond Weight Light Normal Heavy Specify the relative weight of the bond paper loaded. Envelope Weight Light Normal Heavy Specify the relative weight of the envelope loaded. Rough Envelope Weight Light Normal Heavy Specify the relative weight of the rough envelope loaded.
Understanding the printer menus 205 Use To Custom [x] Weight Light Normal Heavy Specify the relative weight of the custom paper loaded. Notes: • Normal is the factory default setting. • The options appear only when the custom type is supported. Paper Loading menu Use To Card Stock Loading Duplex Off Determine and set two-sided printing for all print jobs with Card Stock as the paper type.
Understanding the printer menus 206 Use To Heavy Loading Duplex Off Determine and set two-sided printing for all print jobs with Heavy as the paper type. Rough/Cotton Loading Duplex Off Determine and set two-sided printing for all print jobs with Rough or Cotton as the paper type. Custom [x] Loading Duplex Off Determine and set two-sided printing for all print jobs with Custom [x] as the paper type. Note: Custom [x] Loading is available only when the custom type is supported.
Understanding the printer menus 207 Custom Bin Names menu Note: This menu appears only in touch‑screen printer models. Use To Standard Bin Specify a custom name for the standard bin. Bin [x] Specify a custom name for Bin [x]. Universal Setup menu Use To Units of Measure Inches Millimeters Identify the units of measure. Portrait Width 3–8.5 inches 76–216 mm Set the portrait width. Notes: • Inches is the US factory default setting. • Millimeters is the international factory default setting.
Understanding the printer menus 208 Bin Setup menu Use To Output Bin Standard Bin Bin [x] Specify the default bin. Notes: • If multiple bins are assigned the same name, then the name appears only once in the menu. • Standard Bin is the factory default setting. Configure Bins Mailbox Link Mail Overflow Link Optional Type Assignment Specify configuration options for bins. Notes: • Mailbox is the factory default setting. This setting treats each bin as a separate mailbox.
Understanding the printer menus 209 Use To Assign Type/Bin Plain Paper Bin Card Stock Bin Transparency Bin Recycled Bin Labels Bin Vinyl Labels Bin Bond Bin Envelope Bin Rough Envelope Bin Letterhead Bin Preprinted Bin Colored Bin Light Paper Bin Heavy Paper Bin Rough/Cotton Bin Custom [x] Bin Select a bin for each supported paper type. For each type, select the following options: Disabled Standard Bin Bin [x] Notes: • Disabled is the factory default setting.
Understanding the printer menus 210 Use To Profiles List Print a list of profiles stored in the printer. Note: This menu item appears only when LDSS is enabled. Print Fonts PCL Fonts PostScript Fonts Print a report of all the fonts available for the printer language currently set in the printer. Print Directory Print a list of all the resources stored in an optional flash memory card or printer hard disk. Note: A separate list is available for PCL and PostScript emulations.
Understanding the printer menus 211 Use To PS SmartSwitch On Off Set the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language. Notes: • On is the factory default setting. • If PS SmartSwitch is disabled, then the printer does not examine incoming data and it uses the default printer language specified in the Setup menu.
Understanding the printer menus 212 Use To Standard Network Setup OR Network [x] Setup Reports Network Card TCP/IP IPv6 Wireless AppleTalk Show and set the printer network settings. Note: The Wireless menu appears only when the printer is connected to a wireless network.
Understanding the printer menus 213 TCP/IP menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > TCP/IP • Network/Ports > Network [x] > Network [x] Setup > TCP/IP Note: This menu is available only in network printers or printers attached to print servers. Use To Set Hostname Set the current TCP/IP host name. Note: This can be changed only from the Embedded Web Server. IP Address View or change the current TCP/IP address.
Understanding the printer menus 214 Use To Backup DNS Server Address View or change the backup DNS server addresses. Backup DNS Server Address 2 Backup DNS Server Address 3 Enable HTTPS Yes No View or change the current HTTPS setting. Note: Yes is the factory default setting.
Understanding the printer menus 215 Use To Wi‑Fi Protected Setup Start Push Button Method Start PIN Method Establish a wireless network and enable network security. Notes: • Start Push Button Method connects the printer to a wireless network when buttons on both the printer and the access point (wireless router) are pressed within a given period of time. • Start PIN Method connects the printer to a wireless network when a PIN on the printer is entered into the wireless settings of the access point.
Understanding the printer menus 216 Use To View Address Show the assigned AppleTalk address. Note: The AppleTalk address can be changed only from the Embedded Web Server. Set Zone Provide a list of AppleTalk zones available on the network. [list of zones available on the network] Note: The default zone for the network is the factory default setting.
Understanding the printer menus 217 Use To USB Buffer Disabled Auto 3K to [maximum size allowed] Set the size of the USB input buffer. Notes: • Auto is the factory default setting. • Disabled turns off job buffering. Any jobs already buffered on the printer hard disk are printed before normal processing resumes. • The USB buffer size value can be changed in 1-K increments.
Understanding the printer menus 218 Use To PCL SmartSwitch On Off Set the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language. Notes: • On is the factory default setting. • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.
Understanding the printer menus 219 Use To Advanced Status On Off Enable bidirectional communication through the parallel port. Protocol Standard Fastbytes Specify the parallel port protocol. Notes: • On is the factory default setting. • Off disables parallel port negotiation. Notes: • Fastbytes is the factory default setting. It provides compatibility with most existing parallel ports and is the recommended setting. • Standard tries to resolve parallel port communication problems.
Understanding the printer menus 220 Use To PCL SmartSwitch On Off Set the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language. Notes: • On is the factory default setting. • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.
Understanding the printer menus 221 Use To Job Buffering Off On Auto Temporarily store print jobs on the printer hard disk before printing. Notes: • Off is the factory default setting. The printer does not buffer print jobs on the printer hard disk. • On buffers print jobs on the printer hard disk. • Auto buffers print jobs only if the printer is busy processing data from another input port.
Understanding the printer menus 222 Use To Parity Even Odd None Ignore Set the parity for serial input and output data frames. Honor DSR On Off Determine whether the printer uses the DSR Signal. Note: None is the factory default setting. Notes: • Off is the factory default setting. • DSR is a handshaking signal used by most serial cables. The serial port uses DSR to distinguish data sent by the computer from data created by electrical noise in the serial cable.
Understanding the printer menus 223 Use To Device‑Initiated E‑mail None Use Device SMTP Credentials Specify what credentials will be used when communicating to the SMTP server. Some SMTP servers require credentials to send an e-mail. Notes: User‑Initiated E‑mail None Use Device SMTP Credentials Use Session User ID & Password Use Session E‑mail address & Password Prompt User • None is the factory default setting for Device‑Initiated E‑mail and User‑Initiated E‑mail.
Understanding the printer menus 224 Use To Edit Access Controls Administrative Menus Function Access Management Solutions Cancel jobs at the Device Control access to printer menus, firmware updates, held jobs, and other access points. Miscellaneous Security Settings menu Note: This menu appears only in touch‑screen printer models.
Understanding the printer menus Use 225 To Confidential Job Expiration Limit the amount of time a confidential print job stays in the printer before it is deleted. Off Notes: 1 hour • If the “Confidential Job Expiration” setting is changed while confidential print jobs 4 hours reside in the printer RAM or printer hard disk, then the expiration time for those print 24 hours jobs does not change to the new default value.
Understanding the printer menus 226 Use To Automatic Method Single pass Multiple pass Mark all disk space used by a previous print job. This method does not permit the file system to reuse this space until it has been cleared. Notes: • “Single pass” is the factory default setting. • Only automatic wiping enables users to activate disk wiping without having to turn the printer off for an extended amount of time. • Highly confidential information should be wiped using only the Multiple pass method.
Understanding the printer menus 227 Use To Manually Set Date and Time [input date/time] Enter the date and time. Notes: • For touch‑screen printer models, date and time are set in YYYY-MM-DD HH:MM format. • Manually setting the date and time sets Enable NTP to No. • For non‑touch‑screen printer models, the wizard lets you set the date and time in YYYY‑MM‑DD‑HH:MM format. Time Zone [list of time zones] Select the time zone.
Understanding the printer menus 228 Settings menu General Settings General Settings menu Use To Display Language English Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Greek Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese Set the language of the text that appears on the printer display. Show Supply Estimates Show estimates Do not show estimates Get an estimate on the status of supplies.
Understanding the printer menus 229 Use To Eco-Mode Off Energy Energy/Paper Paper Minimize the use of energy, paper, or specialty media. Notes: • For touch‑screen printer models, touch Eco‑Mode, and then select from the options. • Off is the factory default setting. Off resets the printer to its factory default settings. • Energy minimizes the power used by the printer. Performance may be affected, but print quality is not. • Energy/Paper minimizes the use of power and of paper and specialty media.
Understanding the printer menus 230 Use To Keyboard Keyboard Type English Francais Francais Canadien Deutsch Italiano Espanol Greek Dansk Norsk Nederlands Svenska Suomi Portuguese Russian Polski Swiss German Swiss French Korean Magyar Turkish Czech Simplified Chinese Traditional Chinese Japanese Custom Key 1 Custom Key 2 Specify a language and custom key information for the printer control panel keyboard.
Understanding the printer menus 231 Use To Displayed Information Left side Right side Specify what is displayed on the upper left and right corners of the printer control panel. For the “Left side” and “Right side” options, select from the following options: None IP Address Hostname Contact Name Location Date/Time mDNS/DDNS Service Name Zero Configuration Name Custom Text [x] Model Name Notes: • This menu appears only in touch‑screen printer models.
Understanding the printer menus 232 Use To Displayed Information (continued) Paper Jam Load Paper Service Errors Customize the displayed information for Paper Jam, Load Paper, and Service Errors. Select from the following options: Display Yes No Message to Display Default Alternate Default [text entry] Alternate [text entry] Notes: • This menu appears only in touch‑screen printer models. • No is the factory default setting for “Display.
Understanding the printer menus 233 Use To Date Format MM‑DD‑YYYY DD‑MM‑YYYY YYYY‑MM‑DD Format the printer date. Time Format 12 hour A.M./P.M. 24 hour clock Format the printer time. Screen Brightness 20–100 Specify the brightness of the display. Notes: • This menu appears only in touch‑screen printer models. • MM-DD-YYYY is the US factory default setting. Note: This menu appears only in touch‑screen printer models. Notes: • This menu appears only in touch‑screen printer models.
Understanding the printer menus 234 Use To Contact Name Specify a contact name for the printer. Notes: • This menu appears only in touch‑screen printer models. • The contact name will be stored on the Embedded Web Server. Location Specify the location of the printer. Notes: • This menu appears only in touch‑screen printer models. • The location will be stored on the Embedded Web Server.
Understanding the printer menus 235 Use To Timeouts Hibernate Timeout Disabled 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days 1 week 2 weeks 1 month Set the printer to operate at a low power state. Notes: • When the Hibernate Timeout timer expires, the printer uses Ethernet connection to check the value of “Hibernate Timeout on Connection.” • If “Hibernate Timeout on Connection” is set to “Do Not Hibernate,” then the printer never automatically hibernates.
Understanding the printer menus 236 Use To Timeouts Job Hold Timeout 5–255 sec Set the amount of time the printer waits for user intervention before it holds jobs that require unavailable resources and continues to print other jobs in the print queue. Notes: • “30 sec” is the factory default setting. • This menu appears only when a printer hard disk is installed.
Understanding the printer menus 237 Use To Print Recovery Page Protect Off On Let the printer successfully print a page that may not have printed otherwise. Notes: • Off is the factory default setting. Off prints a partial page when there is not enough memory to print the whole page. • On sets the printer to process the whole page so that the entire page prints.
Understanding the printer menus 238 Use To Export Configuration Package Export Export the printer configuration package to a flash drive. Note: The configuration package cannot be exported unless a flash drive is attached to the printer. Flash Drive Menu Print Settings menu Use To Copies 1–999 Specify a default number of copies for each print job. Paper Source Tray [x] MP Feeder Manual Paper Manual Envelope Set a default paper source for all print jobs.
Understanding the printer menus 239 Use To Duplex Binding Long Edge Short Edge Define the way duplexed pages are bound and printed. Notes: • Long Edge assumes binding along the long edge of the page (left edge for portrait and top edge for landscape). This is the factory default setting. • Short Edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape). Paper Saver Orientation Auto Landscape Portrait Specify the orientation of a multiple‑page document.
Understanding the printer menus 240 Use To Separator Sheets Off Between Copies Between Jobs Between Pages Specify if blank separator sheets are inserted. Notes: • Off is the factory default setting. • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to On. If Collate is set to Off, then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's. • Between Jobs inserts a blank sheet between print jobs.
Understanding the printer menus 241 Use To Print Area Normal Fit to Page Whole Page Set the logical and physical printable area. Notes: • Normal is the factory default setting. When attempting to print data in the non‑printable area defined by the Normal setting, the printer clips the image at the boundary. • Fit to Page fits the page content into the selected paper size.
Understanding the printer menus 242 Finishing menu Use To Sides (Duplex) 1 sided 2 sided Specify whether two‑sided (duplex) printing is set as the default for all print jobs. Notes: • “1 sided” is the factory default setting. • You can set two‑sided printing from the printer software. For Windows users: Click File > Print, and then click Properties, Preferences, Options, or Setup. For Macintosh users: Choose File > Print, and then adjust the settings from the Print dialog and pop‑up menus.
Understanding the printer menus 243 Use To Separator Source Tray [x] Manual Feeder Specify the paper source for separator sheets. Notes: • Tray 1 (standard tray) is the factory default setting. • From the Paper menu, set Configure MP to "Cassette" for Manual Feeder to appear as a menu setting. Paper Saver Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up Print multiple‑page images on one side of a paper.
Understanding the printer menus 244 Use To Hole Punch Mode 2 holes 3 holes 4 holes Specify the number of holes to be created on printed outputs for the purpose of collecting the sheets in a binder or folder. Notes: • “3 holes” is the US factory default setting. “4 holes” is the international factory default setting. • This menu appears only when a supported staple, hole punch finisher is installed. Offset Pages None Between Copies Between Jobs Offset pages at certain instances.
Understanding the printer menus 245 Use To Enhance Fine Lines On Off Enable a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts. Notes: • Off is the factory default setting. • You can set this option from the printer software. For Windows users, click File > Print, and then click Properties, Preferences, Options, or Setup. For Macintosh users, choose File > Print, and then adjust the settings from the Print dialog and pop‑up menus.
Understanding the printer menus 246 Use To Disk Near Full Action None E‑mail Current Log E‑mail & Delete Current Log E‑mail & Delete Oldest Log Post Current Log Post & Delete Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest Log Delete All Logs Delete All But Current Determine and set how the printer responds when the printer hard disk is nearly full.
Understanding the printer menus 247 Use To Format Flash Yes No Format the flash memory. Warning—Potential Damage: Do not turn off the printer while the flash memory is being formatted. Notes: • Yes deletes all data stored in flash memory. • No cancels the format request. • Flash memory refers to the memory added by installing a flash memory card in the printer. • The flash memory option card must not be read/write‑ or write‑protected.
Understanding the printer menus 248 Use To Annotations Do Not Print Print Print annotations in a PDF. Note: Do Not Print is the factory default setting. PostScript menu Use To Print PS Error On Off Print a page containing the PostScript error. Lock PS Startup Mode On Off Disable the SysStart file. Font Priority Resident Flash/Disk Establish the font search order. Note: Off is the factory default setting. Note: Off is the factory default setting.
Understanding the printer menus 249 Use To Symbol Set 10U PC‑8 12U PC‑850 Specify the symbol set for each font name. Notes: • 10U PC‑8 is the US factory default setting. 12U PC‑850 is the international factory default setting. • A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific programs such as math symbols for scientific text. Only the supported symbol sets are shown.
Understanding the printer menus 250 Use To PCL Emulation Settings Auto CR after LF On Off Specify whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command. PCL Emulation Settings Auto LF after CR On Off Specify whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command.
Understanding the printer menus 251 HTML menu Use Font Name Albertus MT Antique Olive Apple Chancery Arial MT Avant Garde Bodoni Bookman Chicago Clarendon Cooper Black Copperplate Coronet Courier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text Intl CG Times Intl Courier Intl Univers To Joanna MT Letter Gothic Lubalin Graph Marigold MonaLisa Recut Monaco New CenturySbk New York Optima Oxford Palatino StempelGaramond Taffy Times TimesNewRoman Univers Zapf Chancery NewSansMTJA NewSansMTCS N
Understanding the printer menus 252 Use To Margin Size 8–255 mm Set the page margin for HTML documents. Notes: • 19 mm is the factory default setting. • Margin size can be increased in 1‑mm increments. Backgrounds Do Not Print Print Specify whether to print backgrounds on HTML documents. Note: Print is the factory default setting. Image menu Use To Auto Fit On Off Select the optimal paper size, scaling, and orientation. Invert On Off Invert bitonal monochrome images.
Understanding the printer menus 253 Menu item Description Printing Guide Provides information about loading paper and other specialty media Media Guide Provides a list of the paper sizes supported in trays and feeders Print Defects Guide Provides information about resolving print defects Menu Map Provides a list of the printer control panel menus and settings Information Guide Provides help in locating additional information Connection Guide Provides information about connecting the printer l
Saving money and the environment 254 Saving money and the environment Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see: • The Notices chapter • The Environmental Sustainability section of the Lexmark Web site at www.lexmark.
Saving money and the environment 255 Avoid paper jams Correctly set the paper type and size to avoid paper jams. For more information, see “Avoiding jams” on page 270. Recycling Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see: • The Notices chapter • The Environmental Sustainability section of the Lexmark Web site at www.lexmark.com/environment • The Lexmark recycling program at www.lexmark.
Saving money and the environment 3 Follow the instructions on the computer screen.
Maintaining the printer 257 Maintaining the printer Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and supplies, may cause damage to your printer. Ordering supplies To order parts and supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web site at www.lexmark.com or contact the place where you purchased the printer.
Maintaining the printer 258 Item Return Program cartridge High Yield Toner Cartridge 521H Extra High Yield Toner Cartridge 521X* For the European Union, European Economic Area , and Switzerland Toner Cartridge 522 High Yield Toner Cartridge 522H Extra High Yield Toner Cartridge 522X* For the Asia Pacific Region (includes Australia and New Zealand) Toner Cartridge 523 High Yield Toner Cartridge 523H Extra High Yield Toner Cartridge 523X* For Latin America (includes Puerto Rico and Mexico)
Maintaining the printer 259 Ordering staple cartridges Part name Part number Staple cartridges 25A0013 Ordering a roller kit For more information on replacing the roller kit, see the instruction sheet that came with the part. Lexmark roller kit and part number Type Part number Printer engine roller maintenance kit 40X7706 Ordering a maintenance kit To identify the supported fuser type, view the label on the fuser. Do either of the following: • Remove the toner cartridge and the imaging unit.
Maintaining the printer 260 Fuser maintenance kit type Part number Type 07 40X8427 Type 08 40X8428 Type 09 40X8429 Storing supplies Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.
Maintaining the printer 261 2 Pull the cartridge out of the printer using the handle. 3 Unpack the new toner cartridge, then remove the packing material, and then shake the cartridge to redistribute the toner. 4 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer. Note: Make sure the cartridge is fully pushed in.
Maintaining the printer 262 5 Close the multipurpose feeder door and the front cover. 2 1 Replacing the imaging unit 1 Lift the front cover, and then pull down the multipurpose feeder door.
Maintaining the printer 263 2 Pull out the toner cartridge from the printer using the handle. 3 Lift the green handle, and then pull out the imaging unit from the printer. 1 2 4 Unpack the new imaging unit, and then shake it. 5 Remove all packing material from the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning—Potential Damage: Do not touch the photoconductor drum.
Maintaining the printer 264 6 Insert the imaging unit into the printer by aligning the arrows on the side rails of the imaging unit with the arrows on the side rails inside the printer. 7 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.
Maintaining the printer 265 8 Close the multipurpose feeder door and the front cover. 2 1 Replacing a staple cartridge 1 Open the stapler door. 2 Pull down the latch of the staple cartridge holder, and then pull the holder out of the finisher.
Maintaining the printer 266 3 Squeeze both sides of the empty staple case with your fingers, and then remove the staple case from the cartridge. 2 1 1 4 Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the cartridge. 2 1 5 Push the staple cartridge into the finisher until it clicks into place. 6 Close the stapler door. Cleaning the printer parts Cleaning the printer Note: You may need to perform this task after every few months.
Maintaining the printer 267 4 Dampen a clean, lint-free cloth with water, and use it to wipe the outside of the printer. Warning—Potential Damage: Do not use household cleaners or detergents to prevent damage to the exterior of the printer. 5 Make sure all areas of the printer are dry before sending a new print job. Emptying the hole punch box 1 Pull out the hole punch box. 2 Empty the container. 3 Insert the emptied hole punch box back into the finisher until it clicks into place.
Maintaining the printer 268 – To remove the finisher, hold the finisher on both sides, and then lift the latches to unlock the finisher. • If the printer does not have a caster base but is configured with optional trays, then remove the trays. Note: Slide the latch on the right side of the optional tray toward the front of the tray until it clicks into place. • Use the handholds located on both sides of the printer to lift it. • Make sure your fingers are not under the printer when you set it down.
Maintaining the printer 269 • Make sure there is adequate clearance around the printer. • Use only the power cord provided with this product or the manufacturer's authorized replacement. Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer warranty.
Clearing jams 270 Clearing jams Carefully select paper and specialty media and load them properly to avoid paper jams. For more information, see “Avoiding jams” on page 270. If jams occur, then follow the steps outlined in this chapter. Note: Jam recovery is set to Auto by default. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks. Avoiding jams Load paper properly • Make sure paper lies flat in the tray.
Clearing jams 271 • Do not slide the paper into the tray. Load paper as shown in the illustration. • Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing tightly against the paper or envelopes. • Push the tray firmly into the printer after loading paper. • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.
Clearing jams 272 • If paper needs to be returned to the mailbox bin, then insert the paper under the bin arm, and then push the paper all the way back. 2 1 Note: If the paper is not under the bin arm, then a jam occurs due to an overfilled bin. Use recommended paper • Use only recommended paper or specialty media. • Do not load wrinkled, creased, damp, bent, or curled paper. • Flex, fan, and straighten paper or specialty media before loading it.
Clearing jams 273 1 2 3 4 5 6 11 7 10 9 8 Jam location Printer message What to do 1 Staple finisher [x]‑page jam, remove paper, open Remove paper from the stapler bin, open the stapler stapler door. Leave paper in bin. [455– door, then remove the staple cartridge, and then 457] remove the jammed staples. 2 Standard bin [x]‑page jam, remove standard bin jam. [203] 3 Inside the printer [x]‑page jam, lift front cover to remove Open the front cover and the multipurpose feeder, cartridge.
Clearing jams Jam location 274 Printer message What to do 9 Upper door and rear [x]‑page jam, open upper and lower duplex area rear door. [231–234] Open the rear door of the printer and the rear duplex area, and then remove the jammed paper. 10 Mailbox [x]‑page jam, remove paper, open mailbox rear door. Leave paper in bin. [43y.xx] Open the rear door of the mailbox, and then remove the jammed paper. 11 Staple finisher rear door [x]‑page jam, remove paper, open finisher rear door.
Clearing jams 275 3 Place the cartridge aside. 4 Lift the green handle, and then pull the imaging unit out of the printer. 1 2 5 Place the imaging unit aside on a flat, smooth surface. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. 6 Pull the jammed paper gently to the right, and then remove it from the printer. Note: Make sure all paper fragments are removed.
Clearing jams 276 8 Insert the cartridge into the printer, and then push the green handle back into place. Notes: • Align the arrows on the guides of the toner cartridge with the arrows in the printer. • Make sure the cartridge is fully pushed in. 9 Close the multipurpose feeder door and the front cover. 2 1 10 Do either of the following to clear the message and continue printing: • For touch‑screen printer models, touch or Done.
Clearing jams 277 1 Pull down the rear door. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 3 Close the rear door. 4 Do either of the following to clear the message and continue printing: • For touch‑screen printer models, touch or Done. • For non‑touch‑screen printer models, select Next > > Clear the jam, press OK > . [x]‑page jam, open upper and lower rear door.
Clearing jams 1 Pull down the rear door. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 3 Close the rear door.
Clearing jams 279 4 Push the back of the standard tray. 5 Press down the rear duplex flap, then firmly grasp the jammed paper, and then gently pull the paper out. Note: Make sure all paper fragments are removed. 2 1 6 Insert the standard tray.
Clearing jams 280 7 Do either of the following to clear the message and continue printing: • For touch‑screen printer models, touch or Done. • For non‑touch‑screen printer models, select Next > > Clear the jam, press OK > . [x]‑page jam, remove standard bin jam. [203] 1 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed.
Clearing jams 281 2 1 3 Insert the tray. 4 Do either of the following to clear the message and continue printing: • For touch‑screen printer models, touch or Done. • For non‑touch‑screen printer models, select Next > > Clear the jam, press OK > [x]‑page jam, open tray [x]. [24x] 1 Check which tray is indicated on the printer display, and then pull the tray. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. .
Clearing jams 282 3 Insert the tray. 4 Do either of the following to clear the message and continue printing: • For touch‑screen printer models, touch or Done. • For non‑touch‑screen printer models, select Next > > Clear the jam, press OK > . [x]‑page jam, clear manual feeder. [250] 1 From the multipurpose feeder, firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed.
Clearing jams 283 2 Flex the sheets of paper back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface. 3 Reload paper into the multipurpose feeder. 4 Slide the paper guide until it lightly rests against the edge of the paper. 5 Do either of the following to clear the message and continue printing: • For touch‑screen printer models, touch or Done. • For non‑touch‑screen printer models, select Next > > Clear the jam, press OK > .
Clearing jams 2 Open the stapler door. 3 Pull down the latch of the staple cartridge holder, and then pull the holder out of the printer. 4 Use the metal tab to lift the staple guard, and then remove any loose staples.
Clearing jams 285 5 Press down the staple guard until it clicks into place. 6 Press the staples against the metal bracket. Note: If the staples are at the rear of the cartridge, then shake the cartridge downward to bring the staples near the metal bracket.
Clearing jams 286 7 Push the cartridge holder firmly back into the stapler unit until the cartridge holder clicks into place. 8 Close the stapler door. 9 Do either of the following to clear the message and continue printing: • For touch‑screen printer models, touch or Done. • For non‑touch‑screen printer models, select Next > > Clear the jam, press OK > .
Clearing jams [x]‑page jam, remove paper, open finisher rear door. Leave paper in bin. [451] 1 Open the rear staple finisher door. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 3 Close the staple finisher door.
Clearing jams 288 4 Do either of the following to clear the message and continue printing: • For touch‑screen printer models, touch or Done. • For non‑touch‑screen printer models, select Next > > Clear the jam, press OK > . [x]‑page jam, remove paper, open expander rear door. Leave paper in bin. [41y.xx] 1 Open the rear output expander door. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed.
Clearing jams 289 3 Close the rear output expander door. 4 Do either of the following to clear the message and continue printing: • For touch‑screen printer models, touch or Done. • For non‑touch‑screen printer models, select Next > > Clear the jam, press OK > .
Clearing jams [x]‑page jam, remove paper, open mailbox rear door. Leave paper in bin. [43y.xx] 1 Open the rear mailbox door. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 3 Close the rear mailbox door.
Clearing jams 291 4 If the jam is in the mailbox bin, then firmly grasp the jammed paper, and then gently pull it out. Note: Make sure all paper fragments are removed. 5 Do either of the following to clear the message and continue printing: • For touch‑screen printer models, touch or Done. • For non‑touch‑screen printer models, select Next > > Clear the jam, press OK > .
Troubleshooting 292 Troubleshooting Understanding the printer messages Cartridge, imaging unit mismatch [41.xy] 1 Check if both the toner cartridge and imaging unit are MICR (Magnetic Ink Character Recognition) or non-MICR supplies. Note: For a list of supported supplies, see the “Ordering supplies” section of the User's Guide or visit www.lexmark.com. 2 Change the toner cartridge or imaging unit so that both are MICR or non‑MICR supplies.
Troubleshooting 293 Change [paper source] to [custom type name] load [orientation] Try one or more of the following • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper. For non‑touch‑screen printer models, press to confirm. • Cancel the print job.
Troubleshooting 294 • To clear the message and resume the job, select Continue on the printer control panel. For non-touch-screen printer models, press to confirm. Close door or insert cartridge The toner cartridge is missing or not installed properly. Insert the cartridge, and then close all doors and covers. Close front door Close the front door of the printer.
Troubleshooting 295 Disk must be formatted for use in this device From the printer control panel, select Format disk to format the printer hard disk and clear the message. Note: Formatting deletes all the files stored in the printer hard disk. Disk near full. Securely clearing disk space. Try one or more of the following: • Select Continue to clear the message. For non-touch-screen printer models, press • Delete fonts, macros, and other data stored in the printer hard disk.
Troubleshooting 296 If necessary, select Continue on the printer control panel to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm. Incompatible output bin [x] [59] Try one or more of the following: • Remove the indicated bin. • Select Continue on the printer control panel to clear the message and continue printing without using the specified bin. For non-touch-screen printer models, press to confirm.
Troubleshooting 297 Insert Tray [x] Try one or more of the following: • Insert the specified tray into the printer. • Cancel the print job. • Reset the active bin for a linked set of bins by selecting Reset active bin on the printer control panel. Install bin [x] Try one or more of the following: • Install the specified bin: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Install the specified bin. 4 Connect the power cord to a properly grounded electrical outlet.
Troubleshooting 298 Select Continue to clear the message. For non-touch-screen printer models, press to confirm. Insufficient memory, some held jobs will not be restored [37] Try one or more of the following: • From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press to confirm. • Delete other held jobs to free up additional printer memory.
Troubleshooting 299 Load [paper source] with [custom type name] [paper orientation] Try one or more of the following: • Load the tray or feeder with the correct size and type of paper. • To use the tray that has the correct size or type of paper, select Finished loading paper on the printer control panel. For non‑touch‑screen printer models, press to confirm. Note: If the printer finds a tray that has the correct size and type of paper, then it feeds from that tray.
Troubleshooting 300 Load manual feeder with [custom type name] [paper orientation] Try one or more of the following: • Load the multipurpose feeder with the correct size and type of paper. • Depending on your printer model, touch Continue or press to clear the message and continue printing. Note: If no paper is loaded in the feeder when Continue or is selected, then the printer manually overrides the request, and then prints from an automatically selected tray. • Cancel the current job.
Troubleshooting 301 Maintenance kit very low, [x] estimated pages remain [80.xy] You may need to replace the maintenance kit very soon. For more information, contact customer support at http://support.lexmark.com or your service representative. If necessary, select Continue on the printer control panel to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm.
Troubleshooting 302 Not enough free space in flash memory for resources [52] Try one or more of the following: • From the printer control panel, select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm. • Delete fonts, macros, and other data stored in the flash memory. • Upgrade to a larger capacity flash memory card. Note: Downloaded fonts and macros that are not previously stored in the flash memory are deleted.
Troubleshooting 3 4 5 6 303 Remove the specified bin. Reattach the bin. Connect the power cord to a properly grounded electrical outlet. Turn the printer back on. • Remove the specified bin: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the specified bin. 4 Contact customer support. • Select Continue on the printer control panel to clear the message and print without using the specified bin. For non-touch-screen printer models, press to confirm.
Troubleshooting 304 Reinstall missing or unresponsive fuser [31.xy] Try one or more of the following: • Remove the unresponsive fuser, and then reinstall it. Note: If the message appears after reinstalling the supply, then the fuser is defective. Replace the fuser. • Install the missing fuser. For more information on installing the fuser, see the instruction sheet that came with the part. Reinstall missing or unresponsive imaging unit [31.
Troubleshooting 305 If removing the paper does not clear the message, then select Continue on the printer control panel. For non-touchscreen printer models, press to confirm. Remove paper from standard output bin Remove the paper stack from the standard bin. The printer automatically detects paper removal and resumes printing. If removing the paper does not clear the message, then select Continue on the printer control panel. For non-touchscreen printer models, press to confirm.
Troubleshooting 306 Replace maintenance kit, 0 estimated pages remain [80.xy] Contact customer support at http://support.lexmark.com or your service representative, and then report the message. The printer is scheduled for maintenance. Replace roller kit [81.xx] 1 Replace the roller kit. For more information, see the instruction sheet that came with the part. 2 Press to clear the message and continue printing. Replace unsupported cartridge [32.
Troubleshooting 307 Serial port [x] disabled [56] Try one or more of the following: • Select Continue to clear the message. For non-touch-screen printer models, press to confirm. The printer discards any data received through the specified serial port. • Select Reset active bin to reset the active bin for a linked set of bins. • Make sure the Serial Buffer menu is set to Enabled. Some held jobs were not restored Select Continue to clear the message.
Troubleshooting 308 Too many disks installed [58] 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the extra printer hard disks. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on. Too many flash options installed [58] 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the extra flash memory. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on.
Troubleshooting 309 Unsupported disk 1 Remove the unsupported disk, and then install a supported one. 2 Select Continue to clear the message and continue printing. For non‑touch screen printer models, press to confirm. Unsupported option in slot [x] [55] 1 Turn off the printer. 2 Unplug the power cord from the wall outlet. 3 Remove the unsupported option card from the printer controller board, and then replace it with a supported card. 4 Connect the power cord to a properly grounded electrical outlet.
Troubleshooting 310 Printer does not respond The printer is not responding Action Yes No Step 1 Go to step 2. Turn on the printer. Make sure the printer is turned on. Is the printer turned on? Step 2 Check if the printer is in Sleep mode or Hibernate mode. Is the printer in Sleep mode or Hibernate mode? Step 3 Press the Sleep button Go to step 3. to wake the printer from Sleep mode or Hibernate mode. Go to step 4.
Troubleshooting 311 Action Yes No Step 8 Go to step 9. Connect the printer cable securely to the printer and the computer, print server, option, or other network device. Go to step 10. Turn off the printer, remove all packing materials, then reinstall the hardware options, and then turn on the printer. Check if one end of the printer cable is plugged into a port on the printer and the other to the computer, print server, option, or other network device.
Troubleshooting 312 Printing problems Confidential and other held jobs do not print Action Yes No Step 1 a From the printer control panel, open the Held Jobs folder, and then verify that your print job is listed. b Resend the print job. The problem is solved. Go to step 2. For more information, see“Printing confidential and other held jobs” on page 74 for non‑touch‑screen printer models.
Troubleshooting 313 Error message about reading the flash drive appears Action Yes No Step 1 Go to step 2. Insert the flash drive into the front USB slot. Check if the flash drive is inserted into the front USB slot. Note: The flash drive will not work if it is inserted into the rear USB slot. Is the flash drive inserted into the front USB slot? Step 2 Wait until the printer is Go to step 3. Check if the indicator light on the printer control panel is blinking green.
Troubleshooting 314 Incorrect characters print Action Yes No Step 1 Deactivate Hex Trace mode. Go to step 2. Contact customer support. The problem is solved. Action Yes No Step 1 a Check if you are printing on paper that is supported by the tray. The problem is solved. Go to step 2. Make sure the printer is not in Hex Trace mode. Note: If Ready Hex appears on the printer display, then turn off the printer, and then turn it back on to deactivate Hex Trace mode.
Troubleshooting 315 Large jobs do not collate Action Yes No Step 1 a From the Finishing menu on the printer control panel, set Collate to (1,2,3) (1,2,3). b Resend the print job. The problem is solved. Go to step 2. Did the job print and collate correctly? Step 2 a From the printer software, set Collate to (1,2,3) (1,2,3). The problem is solved. Go to step 3. Note: Setting Collate to (1,1,1) (2,2,2) in the software overrides the setting in the Finishing menu. b Resend the print job.
Troubleshooting 316 Print job takes longer than expected Action Yes No Step 1 The problem is solved. Go to step 2. Change the environmental settings of the printer. a From the printer control panel, navigate to: Settings > General Settings b Select Eco‑Mode or Quiet Mode, and then select Off. Note: Disabling Eco-Mode or Quiet Mode may increase the consumption of energy or supplies, or both. Did the job print? Step 2 The problem is solved. Go to step 3.
Troubleshooting Action 317 Yes No The problem is solved. Go to step 3. Step 2 a Check if the printer is plugged in and turned on, and if Ready appears on the printer display. b Resend the print job. Do the jobs print? Step 3 The problem is solved. Go to step 4. If an error message appears on the printer display, then clear the message. Note: The printer continues to print after clearing the message.
Troubleshooting Action 318 Yes No Step 1 The problem is solved. Go to step 2. a Make sure the size of the paper loaded in the tray matches the fuser type. Note: Use a 110-volt fuser for printing on letter-size paper and a 220-volt fuser for printing on A4‑size paper. b Resend the print job. Does the print speed increase? Step 2 a Replace the fuser. For more information on installing the fuser, see the instruction sheet that came with the part. b Resend the print job. The problem is solved.
Troubleshooting 319 Unexpected page breaks occur Action Yes No Step 1 The problem is solved. Go to step 2. Adjust the print timeout settings. a From the printer control panel, navigate to: Settings > General Settings > Timeouts > Print Timeout b Select a higher setting and then, depending on your printer model, or Submit. select c Resend the print job. Did the file print correctly? Step 2 a Check the original file for manual page breaks. The problem is solved. Contact customer support.
Troubleshooting 320 Action Yes No Step 3 Go to step 4. For more information, see the setup sheet that came with the 2100-sheet tray. Go to step 5. Manually add the tray in the printer driver. Print a menu settings page, and then check if the tray is listed in the Installed Features list. Note: If the tray is listed in the menu settings page, but paper jams when it enters or exits the tray, then it may not be properly installed.
Troubleshooting 321 Action Yes No Step 4 a Check if the internal option is selected. The problem is solved. Contact customer support. It may be necessary to manually add the internal option in the printer driver to make it available for print jobs. For more information, see “Updating available options in the printer driver” on page 36. b Resend the print job. Does the internal option operate correctly? Internal print server does not operate correctly Action Yes No Step 1 Go to step 2.
Troubleshooting 322 Action Yes Step 2 The problem is solved. Contact customer support. Check the cable and the ISP connection. a Use the correct cable, and then make sure it is securely connected to the ISP. b Check if the ISP solution interface cable is securely connected into the receptacle of the controller board. No Note: The ISP solution interface cable and the receptacle on the controller board are color‑coded.
Troubleshooting 323 Action Yes Step 4 The problem is solved. Contact customer support. Check if the tray is available in the printer driver. No Note: If necessary, manually add the tray in the printer driver to make it available for print jobs. For more information, see “Updating available options in the printer driver” on page 36. Is the tray available in the printer driver? USB/parallel interface card does not operate correctly Action Yes No Step 1 Go to step 2.
Troubleshooting 324 Paper frequently jams Action Yes No Step 1 a Pull out the tray, and then do one or more of the following: Go to step 2. The problem is solved. Go to step 3. The problem is solved. • Make sure paper lies flat in the tray. • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray. • Check if the paper guides are aligned against the edges of the paper. • Make sure the paper is below the maximum paper fill indicator.
Troubleshooting 325 Print quality problems Characters have jagged or uneven edges Action Yes Go to step 2. Step 1 a Print a font sample list to check if the fonts you are using are supported by the printer. 1 From the printer control panel, navigate to: No Select a font that is supported by the printer. Menus > Reports > Print Fonts 2 Select PCL Fonts or PostScript Fonts. b Resend the print job. Are you using fonts that are supported by the printer? The problem is solved. Contact customer support.
Troubleshooting 326 Action Yes No Step 2 Go to step 3. Do one or more of the following: From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray. • Specify the paper size from the tray settings to match the paper loaded in the tray. Do the paper size and type match the paper loaded in the tray? • Change the paper loaded in the tray to match the paper size specified in the tray settings.
Troubleshooting 327 Action Yes No Step 2 a Replace the fuser. For more information on installing the fuser, see the instruction sheet that came with the part. b Resend the print job. The problem is solved. Contact customer support. Do compressed images still appear? Gray background on prints Leading edge ABCDE ABCDE ABCDE Trailing edge Action Yes No Step 1 a From the Quality Menu on the printer control panel, decrease the toner darkness. The problem is solved. Go to step 2.
Troubleshooting 328 Horizontal voids appear on prints Leading edge Trailing edge Action Yes No Step 1 a Make sure your software program is using a correct fill pattern. Go to step 2. The problem is solved. Step 2 Go to step 3. a Load the specified tray or feeder with a recommended type of paper. The problem is solved. b Resend the print job. Do horizontal voids appear on prints? b Resend the print job. Do horizontal voids appear on prints? Step 3 a Redistribute the toner in the imaging unit.
Troubleshooting 329 Incorrect margins on prints ABC DEF Action Yes No Step 1 The problem is solved. Go to step 2. a Move the width and length guides in the tray to the correct positions for the paper size loaded. b Resend the print job. Are the margins correct? Step 2 From the printer control panel, set the paper size in the Paper menu to match the paper loaded in the tray. Does the paper size match the paper loaded in the tray? Go to step 3.
Troubleshooting 330 Paper curl Action Yes No Step 1 Go to step 2. Adjust the width and length guides. Go to step 3. Specify the paper type and weight from the tray settings to match the paper loaded in the tray. Go to step 4. The problem is solved. Go to step 5. The problem is solved. Contact customer support. The problem is solved. Move the width and length guides in the tray to the correct positions for the size of the paper loaded.
Troubleshooting Action 331 Yes Step 1 Go to step 2. a Move the width and length guides in the tray to the correct positions for the size of the paper loaded in the tray. b Resend the print job. No The problem is solved. Do print irregularities still appear? Step 2 Go to step 3. Specify the paper size and type from the tray settings to match the paper loaded in the tray. Go to step 4. The problem is solved.
Troubleshooting 332 Print is too dark ABC DEF Action Yes Go to step 2. Step 1 a From the Quality menu on the printer control panel, reduce the toner darkness. No The problem is solved. Note: 8 is the factory default setting. b Resend the print job. Is the print still too dark? Step 2 Go to step 3. a From the printer control panel, set the paper type, texture and weight in the Paper menu to match the paper loaded in the tray. b Resend the print job.
Troubleshooting 333 Action Yes No Step 5 a Load paper from a fresh package. Go to step 6. The problem is solved. Contact customer support. The problem is solved. Yes No Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Is the print still too dark? Step 6 Replace the imaging unit, and then resend the print job. Is the print still too dark? Print is too light ABC DEF Action Go to step 2.
Troubleshooting 334 Action Yes Step 4 From the printer Go to step 5. control panel, change the texture settings in the Paper Texture menu to match the paper you are printing on. Make sure that the paper has no texture or rough finishes. Are you printing on textured or rough paper? Step 5 a Load paper from a fresh package. No Go to step 6. The problem is solved. Go to step 7. The problem is solved. Contact customer support. The problem is solved.
Troubleshooting 335 Action Yes No Step 1 a Check if there is packing material left on the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. Go to step 2. The problem is solved. Go to step 3. The problem is solved. Contact customer support. The problem is solved. 2 Check if the packing material is properly removed from the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Troubleshooting 336 Action Yes No Step 1 a Reinstall the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. Go to step 2. The problem is solved. Contact customer support. The problem is solved. Yes No Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. 2 Install the imaging unit, and then the cartridge. b Resend the print job.
Troubleshooting 337 Shadow images appear on prints Leading edge A AB BC CD D A B C D ABCD Trailing edge Action Yes No Step 1 Go to step 2. Load paper with the correct paper type and weight in the tray. Go to step 3. Change the paper loaded in the tray to match the paper type and weight specified in the tray settings. Go to step 4. The problem is solved. Contact customer support. The problem is solved. Load paper with the correct paper type and weight in the tray.
Troubleshooting Action 338 Yes Step 1 Go to step 2. a Move the width and length guides in the tray to the correct positions for the size of the paper loaded. b Resend the print job. No The problem is solved. Is the print still skewed? Step 2 a Check if you are printing on a paper that is supported by the tray. Contact customer support. The problem is solved. Yes No b Resend the print job.
Troubleshooting 339 Action Yes No Step 4 a Reinstall the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. Go to step 5. The problem is solved. Contact customer support. The problem is solved. Yes No Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. 2 Install the imaging unit, and then the cartridge. b Resend the print job.
Troubleshooting 340 Action Yes No Step 3 a Load paper from a fresh package. Go to step 4. The problem is solved. Go to step 5. The problem is solved. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Do streaked vertical lines appear on prints? Step 4 a Reinstall the imaging unit. 1 Remove the toner cartridge, and then the imaging unit.
Troubleshooting 341 Action Yes Step 2 The problem is solved. Contact customer support. Replace the imaging unit, and then resend the print job. No Did the toner fog or background shading disappear from the prints? Toner specks appear on prints Action Yes No Replace the imaging unit, and then resend the print job. Contact customer support. The problem is solved. Action Yes No Step 1 Go to step 2.
Troubleshooting 342 Action Yes No Step 4 a Enable Quiet mode. Contact customer support. The problem is solved. Action Yes No Step 1 Go to step 2. Set the paper type to Transparency. Contact customer support. The problem is solved. Action Yes No Replace the imaging unit, and then resend the print job. Contact customer support. The problem is solved. From the printer control panel, navigate to: Settings > General Settings > Quiet Mode > On b Resend the print job.
Troubleshooting 343 Vertical voids appear on prints Leading edge Trailing edge Action Yes No Step 1 a Make sure your software program is using a correct fill pattern. Go to step 2. The problem is solved. Step 2 Go to step 3. a From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray. b Resend the print job. The problem is solved. b Resend the print job.
Troubleshooting 344 Solving home screen applications problems This troubleshooting step applies only to touch-screen printer models. An application error has occurred Action Yes No Step 1 Go to step 2. Contact customer support. Check the system log for relevant details. a Open a Web browser, and then type the printer IP address in the address field. If you do not know the IP address of the printer, then you can: • View the IP address on the printer home screen.
Troubleshooting 345 Action Yes No Step 3 Go to step 4. Contact your system support person. Go to step 5. Tighten the cable connection. Go to step 6. Contact your system support person. Check if the network connection is working. Is the network connection working? Step 4 Make sure the cable connections to the printer and print server are secure. For more information, see the setup documentation that came with the printer.
Notices 346 Notices Product information Product name: Lexmark MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS810de, MS812de Machine type: 4063 Model(s): 210, 230, 23E, 410, 430, 630, 63E Edition notice October 2012 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC.
Notices 347 Trademarks Lexmark, Lexmark with diamond design, MarkNet, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products.
Notices 348 All other trademarks are the property of their respective owners. Licensing notices All licensing notices associated with this product can be viewed from the root directory of the installation software CD. Noise emission levels The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296. Note: Some modes may not apply to your product.
Notices 349 This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer. ENERGY STAR Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark. Temperature information Ambient temperature 15.6 to 32.
Notices 350 DANGER - Invisible laser radiation when cartridges are removed and interlock defeated. Avoid exposure to laser beam. PERIGO - Radiação a laser invisível será liberada se os cartuchos forem removidos e o lacre rompido. Evite a exposição aos feixes de laser. Opasnost - Nevidljivo lasersko zračenje kada su kasete uklonjene i poništena sigurnosna veza. Izbjegavati izlaganje zracima. NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, ze zařízení je vysíláno neviditelné laserové záření.
Notices 351 Sleep Mode This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout. Factory default Sleep Mode Timeout for this product (in minutes): 30 By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 180 minutes.
Notices 352 This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.
Notices 353 Extent of limited warranty Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.
Notices 354 Modular component notice This product may contain the following modular component(s): Lexmark Regulatory Type/LEX-M01-005; FCC ID: IYLLEXM01005; Industry Canada IC: 2376A-M01005 Patent acknowledgment The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp.
Notices 355 if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Notices 356 Regulatory notices for wireless products This section contains the following regulatory information pertaining to wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers. Exposure to radio frequency radiation The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies.
Notices 357 Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada.
Notices 358 Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch Hiermit erklärt Lexmark International, Inc.
Notices 359 Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Model‑specific information The following information applies only to the MS812de printer model.
Notices 360 Avis de conformité aux normes de l’industrie du Canada Cet appareil numérique de classe A est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.
Notices 361 To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.
Notices 362 Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment. Compliance is indicated by the CE marking.
Notices 363 Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC. Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski Ar šo Lexmark International, Inc.
Index 364 Index Numerics 2100‑sheet tray loading 57, 106, 156 550‑sheet tray installing 29 Symbols [x]‑page jam, clear manual feeder. [250] 282 [x]‑page jam, lift front cover to remove cartridge. [200–201] 274 [x]‑page jam, open tray [x]. [24x] 281 [x]‑page jam, open upper and lower rear door. [231–234] 277 [x]‑page jam, open upper rear door. [202] 276 [x]‑page jam, remove paper, open expander rear door. Leave paper in bin. [41y.xx] 288 [x]‑page jam, remove paper, open finisher rear door.
Index supply notifications, toner cartridge 77, 126, 176 configuring port settings 42 configuring supply notifications 126, 176 configuring supply notifications from the Embedded Web Server 77 connecting to a wireless network using PBC, Push Button Configuration method 41 using PIN, Personal Identification Number method 41 using the Embedded Web Server 41 using wireless setup wizard 40 conservation settings brightness, adjusting 82, 131, 181 conserving supplies 254 Eco‑Mode 79, 129, 178 Hibernate Mode 131
Index F factory defaults restoring 132, 182 factory defaults, restoring 83 FCC notices 354, 356, 359, 360 finding more information about the printer 8 finding printer IP address 95, 144 finisher finishing features 194 supported paper sizes 194 finisher features 194 Finishing menu 242 firmware card 12 flash drive printing from 72, 122, 172 flash drives supported file types 71, 121, 171 font sample list printing 75, 124, 174 Forms and Favorites setting up 96, 146 G General Settings menu 228 green settings E
Index letterhead loading, 2100‑sheet tray 57, 106, 156 loading, multipurpose feeder 64, 113, 163 loading, trays 50, 99, 149 linking trays 69, 118, 119, 168, 169 Load [paper source] with [custom string] [paper orientation] 298 Load [paper source] with [custom type name] [paper orientation] 299 Load [paper source] with [paper size] [paper orientation] 299 Load [paper source] with [paper type] [paper size] [paper orientation] 299 Load manual feeder with [custom string] [paper orientation] 299 Load manual feed
Index firmware cards 12 Internal Solutions Port, installing 17 memory card 12, 15 printer hard disk, installing 23 printer hard disk, removing 27 updating in printer driver 36 ordering imaging unit 258 maintenance kit 259 roller kit 259 staple cartridges 259 ordering supplies toner cartridges 257 P paper characteristics 188 letterhead 190 preprinted forms 190 recycled 190 selecting 189 setting size 49 setting type 49 storing 188, 191 unacceptable 190 Universal size setting 49, 99, 149 using recycled 254 P
Index indicator light 49, 90, 139 parts 48, 90, 139 Sleep button light 49, 90, 139 using 48, 90, 139 printer control panel, virtual display using the Embedded Web Server 76, 126 printer hard disk disposing of 84, 133, 182 encrypting 86, 135, 184 installing 23 removing 27 wiping 86, 134, 184 printer hard disk encryption 86, 135, 184 printer hard disk memory erasing 86, 134, 184 printer information where to find 8 printer IP address finding 95, 144 printer is printing blank pages 334 printer messages [x]‑pag
Index Remove defective disk [61] 304 Remove packaging material, [area name] 304 Remove paper from [linked set bin name] 304 Remove paper from all bins 304 Remove paper from bin [x] 304 Remove paper from standard output bin 305 Replace cartridge, 0 estimated pages remain [88.xy] 305 Replace cartridge, printer region mismatch [42.xy] 305 Replace imaging unit, 0 estimated pages remain [84.xy] 305 Replace maintenance kit, 0 estimated pages remain [80.xy] 306 Replace missing or unresponsive fuser [31.
Index Replace unsupported imaging unit [32.
Index troubleshooting an application error has occurred 344 cannot open Embedded Web Server 344 checking an unresponsive printer 310 contacting customer support 345 solving basic printer problems 310 troubleshooting, display printer display is blank 311 troubleshooting, paper feed message remains after jam is cleared 324 troubleshooting, print envelope seals when printing 312 error reading flash drive 313 held jobs do not print 312 incorrect characters print 314 incorrect margins on prints 329 jammed pages