MX610 Series User's Guide May 2013 Machine type(s): 7016 Model(s): 630, 670, 675 www.lexmark.
Contents 2 Contents Safety information.......................................................................................7 Learning about the printer...........................................................................9 Finding information about the printer......................................................................................................9 Selecting a location for the printer.......................................................................................................
Contents 3 Setting up the printer software...............................................................................................................48 Networking..............................................................................................................................................50 Verifying printer setup............................................................................................................................58 Loading paper and specialty media...............
Contents 4 Canceling an e-mail...............................................................................................................................104 Understanding the e-mail options........................................................................................................104 Faxing......................................................................................................107 Setting up the printer to fax...................................................................
Contents 5 Finding printer security information.....................................................................................................219 Maintaining the printer............................................................................220 Cleaning the printer parts.....................................................................................................................220 Checking the status of parts and supplies..................................................................
Contents 6 Solving scanner problems.....................................................................................................................309 Solving home screen applications problems.........................................................................................314 Embedded Web Server does not open.................................................................................................314 Contacting customer support...........................................................
Safety information 7 Safety information Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible. Do not place or use this product near water or wet locations. CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Safety information 8 Refer service or repairs, other than those described in the user documentation, to a service representative. CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using multiple input options. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, then you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.
Learning about the printer 9 Learning about the printer Finding information about the printer What are you looking for? Find it here Initial setup instructions: Setup documentation—The setup documentation came with the printer and is also available at http://support.lexmark.com.
Learning about the printer 10 What are you looking for? Find it here The latest supplemental information, updates, and customer support: Lexmark support Web site— http://support.lexmark.com • • • • • Documentation Note: Select your country or region, and then select your product to view the appropriate support site.
Learning about the printer 11 5 1 4 1 3 1 Right side 304.8 mm (12 in.) 2 Front 508 mm (20 in.) 3 Left side 203.2 mm (8 in.) 4 Rear 203.2 mm (8 in.) 5 Top 800 mm (31.49 in.) 2 Printer configurations CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed. CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability.
Learning about the printer 12 Basic model 2 3 4 1 5 7 6 1 Display 2 Automatic document feeder (ADF) 3 ADF tray 4 ADF bin 5 Standard bin 6 Multipurpose feeder 7 Standard 550‑sheet tray
Learning about the printer 13 Configured model 1 1 2 3 3 2 1 Optional 250‑sheet tray 2 Optional 550‑sheet tray 3 Optional stapler Using the Embedded Web Server Note: This feature is available only in network printers or printers connected to print servers. If the printer is installed on a network, then you can use the Embedded Web Server to do the following: • • • • • • View the virtual display of the printer control panel. Check the status of the printer supplies.
Learning about the printer 14 3 Press Enter. The Embedded Web Server page appears. Understanding the basic functions of the scanner • • • • • Make quick copies or set the printer to perform specific copy jobs. Send a fax using the printer control panel. Send a fax to multiple fax destinations at the same time. Scan documents and send them to your computer, an e-mail address, or an FTP destination. Scan documents and send them to another printer (PDF through an FTP).
Understanding the printer control panel 15 Understanding the printer control panel Using the printer control panel Use the To 1 Printer control panel 2 Home button Go to the home screen. 3 Sleep button Enable Sleep mode or Hibernate mode. • View the printer status and messages. • Set up and operate the printer. Do the following to wake the printer from Sleep mode: • • • • • Press any hard button. Open a door or cover. Send a print job from the computer.
Understanding the printer control panel 16 Indicator light Printer status Solid green The printer is on, but idle. Blinking red The printer requires user intervention. Sleep button light Printer status Off The printer is off, idle or in Ready state. Solid amber The printer is in Sleep mode. Blinking amber The printer is entering or waking from Hibernate mode. Blinking amber for 0.1 second, then goes completely off for 1.9 seconds in a slow, pulsing pattern The printer is in Hibernate mode.
Understanding the printer control panel Touch 9 17 To Bookmarks Create, organize, and save a set of bookmarks (URL) into a tree view of folders and file links. Note: The tree view supports only bookmarks created from this function, and not from any other application. 10 USB Drive View, select, print, scan, or e‑mail photos and documents from a flash drive. Note: This icon appears only when you return to the home screen while a memory card or flash drive is connected to the printer.
Understanding the printer control panel 18 Feature Description Printer IP address The IP address of your network printer is located at the upper left corner of the home screen and appears as four sets of numbers separated by periods. You can use the IP address when accessing the Embedded Web Server so you can view and remotely configure printer settings even when you are not physically near the printer. Example: 123.123.123.
Understanding the printer control panel Touch Cancel Reset To • Cancel an action or a selection. • Exit a screen and return to the previous screen without saving changes. Reset values on the screen.
Setting up and using the home screen applications 20 Setting up and using the home screen applications Notes: • Your home screen may vary, depending on your home screen customization settings, administrative setup, and active applications. Some applications are supported only in select printer models. • There may be additional solutions and applications available for purchase. For more information, visit http://support.lexmark.com or contact the place where you purchased the printer.
Setting up and using the home screen applications 21 3 Click Advanced > TCP/IP. 4 Look for IPv4 Address. Finding the IP address of the printer Note: Make sure your printer is connected to a network or to a print server. You can find the printer IP address: • From the top left corner of the printer home screen. • From the TCP/IP section in the Network/Ports menu. • By printing a network setup page or menu settings page, and then finding the TCP/IP section.
Setting up and using the home screen applications 22 Understanding the different applications Use To Card Copy Scan and print both sides of a card on a single page. For more information, see “Setting up Card Copy” on page 23. Fax Scan a document, and then send it to a fax number. For more information, see “Faxing” on page 107. Forms and Favorites Quickly find and print frequently used online forms directly from the printer home screen.
Setting up and using the home screen applications Use 23 To Streamline work processes by letting you quickly find and print frequently used online forms directly from the printer home screen. Note: The printer must have permission to access the network folder, FTP site, or Web site where the bookmark is stored. From the computer where the bookmark is stored, use sharing, security, and firewall settings to allow the printer at least a read access.
Setting up and using the home screen applications 24 3 Change the default scanning options, if necessary. • Default tray—Select the default tray to be used for printing scan images. • Default number of copies—Specify the number of copies that should automatically print when the application is used. • Default contrast setting—Specify a setting to increase or decrease the level of contrast when a copy of the scanned card is printed.
Setting up and using the home screen applications 25 1 Open a Web browser, and then type the printer IP address in the address field. Note: View the printer IP address on the printer home screen. The printer IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. 2 Click Settings > Apps > Apps Management > Multi Send. 3 From the Profiles section, click Add, and then customize the settings.
Setting up and using the home screen applications 26 • Make sure the printer has access rights to the folder where the specified destination is located. 4 Click Apply. To use the application, touch Scan to Network on the printer home screen, and then follow the instructions on the printer display. Setting up Remote Operator Panel This application enables you to interact with the printer control panel even when you are not physically near the network printer.
Setting up and using the home screen applications 27 3 To export or import a configuration for multiple applications, do the following: a Click Settings > Import/Export. b Do either of the following: • To export a configuration file, click Export Embedded Solutions Settings File, and then follow the instructions on the computer screen to save the configuration file.
Additional printer setup Additional printer setup Installing internal options CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Additional printer setup 29 Accessing the controller board CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. 1 Open the controller board access door.
Additional printer setup 1 Memory card connector 2 Option card connector 3 Printer hard disk connector 4 Lexmark Internal Solutions Port connector 4 Close the shield, and then the access door. Installing a memory card CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing.
Additional printer setup 31 3 Align the notch (1) on the memory card with the ridge (2) on the connector. 1 2 4 Push the memory card straight into the connector, and then push the card toward the controller board wall until it clicks into place. 5 Close the controller board shield, and then the controller board access door. Note: When the printer software and any hardware options are installed, you may need to manually add the options in the printer driver to make them available for print jobs.
Additional printer setup Installing an optional card CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Additional printer setup 33 4 Push the card firmly into place as shown in the illustration. Warning—Potential Damage: Improper installation of the card may cause damage to the card and the controller board. Note: The entire length of the connector on the card must touch and be flushed against the controller board. 5 Close the controller board shield, and then the controller board access door.
Additional printer setup 34 Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board electronic components or connectors. 1 Open the controller board access door. 2 Lightly press the stop on the left side of the access door, and then slide the access door to remove it. 1 2 3 3 Unpack the ISP kit.
Additional printer setup 35 1 ISP solution 2 Screw to attach the ISP to the bracket 3 ISP exterior cover 4 Screws to attach the ISP metal bracket to the printer cage 5 Plastic bracket 6 Long ISP cable 4 Place the plastic bracket inside the ISP exterior cover until it clicks into place. 5 Slide and push the ISP solution into the plastic bracket.
Additional printer setup 6 Secure the ISP solution to the plastic bracket using the long screw. 7 Tighten the two screws on the end of the ISP solution.
Additional printer setup 8 Attach the white plug of the ISP solution interface cable into the white receptacle on the ISP. 9 Attach the ISP exterior cover at an angle by inserting the left hinges first.
Additional printer setup 10 Lower the rest of the cover, and then slide the cover to the right. 11 Run the ISP cable through the controller board shield.
Additional printer setup 39 12 Open the shield using the green handle. 1 2 13 Attach the blue plug of the ISP solution interface cable into the blue receptacle on the controller board. Note: If you have installed a printer hard disk, then you need to remove it. For more information, see “Removing a printer hard disk” on page 43. To reinstall the printer hard disk, see “Installing a printer hard disk” on page 40.
Additional printer setup 40 14 Close the shield. 15 Close the ISP exterior cover. Note: When the printer software and any hardware options are installed, it may be necessary to manually add the options in the printer driver to make them available for print jobs. For more information, see “Updating available options in the printer driver” on page 49.
Additional printer setup a Using a flat‑head screwdriver, loosen the screws. b Insert the plug of the printer hard disk interface cable into the receptacle of the controller board. Note: The plug and the receptacle are color‑coded blue.
Additional printer setup 42 c Align the screws on the printer hard disk to the slots on the controller board bracket, and then slide the printer hard disk onto the brackets. d Tighten the two screws. 4 Close the controller board shield, and then close the controller board access door. Note: When the printer software and any hardware options are installed, you may need to manually add the options in the printer driver to make them available for print jobs.
Additional printer setup 43 Removing a printer hard disk Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board electronic components or connectors. 1 Access the controller board. For more information, see “Accessing the controller board” on page 29. Note: This task requires a flat‑head screwdriver.
Additional printer setup 44 Installing hardware options Order of installation CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing.
Additional printer setup 45 1 2 2 Unpack the tray, and then remove all packing material. 3 Pull out the tray from the base. 2 4 Remove any packing material from inside the tray. 5 Insert the tray into the base. 6 Place the tray near the printer. 7 Align the printer with the tray, and then slowly lower the printer into place. Note: Optional trays lock together when stacked.
Additional printer setup 46 1 2 8 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer. 2 1 Notes: • When the printer software and any hardware options are installed, you may need to manually add the options in the printer driver to make them available for print jobs. For more information, see “Updating available options in the printer driver” on page 49.
Additional printer setup 47 Attaching cables CAUTION—POTENTIAL INJURY: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning storm. Connect the printer to the computer using a USB cable or to the network using an Ethernet cable.
Additional printer setup 48 Use the To 7 USB printer port Connect the printer to a computer. 8 Security slot Attach a lock that will secure the printer in place. Setting up the printer software Installing the printer software Notes: • If you installed the printer software on the computer before but need to reinstall the software, then uninstall the current software first. • Close all open software programs before installing the printer software. 1 Obtain a copy of the software installer package.
Additional printer setup Updating available options in the printer driver When any hardware options are installed, you may need to manually add the options in the printer driver to make them available for use. For Windows users 1 Open the printers folder. In Windows 8 From the Search charm, type run, and then navigate to: Apps list > Run > type control printers > OK In Windows 7 or earlier a Click or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.
Additional printer setup 50 Networking Notes: • Purchase a MarkNetTM N8350 wireless network adapter first before setting up the printer on a wireless network. For information on installing the wireless network adapter, see the instruction sheet that came with the adapter. • A Service Set Identifier (SSID) is a name assigned to a wireless network. Wired Equivalent Privacy (WEP), Wi-Fi Protected Access (WPA), WPA2, and 802.1X-RADIUS are types of security used on a network.
Additional printer setup 51 In Windows 7 or earlier a Click , or click Start and then click Run. b In the Start Search or Run dialog, type D:\setup.exe. c Press Enter, or click OK. Note: D is the letter of your CD or DVD drive. • If you are using the downloaded software installer from the Web, then double‑click the installer that you have saved in your computer. Wait for the Select Installation Type dialog to appear, and then click Install.
Additional printer setup 52 d Click the IP tab. e Type the printer IP address in the address field, and then click Add. • For AppleTalk printing: Notes: – Make sure AppleTalk is activated on your printer. – This feature is supported only in Mac OS X version 10.5.
Additional printer setup 53 Notes: – If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility of the computer network adapter, and then look for the network name. If you cannot find the SSID or the security information for your network, then see the documentation that came with the access point, or contact your system support person.
Additional printer setup 54 Using the Push Button Configuration method 1 From the printer control panel, navigate to: > Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup > Wi‑Fi Protected Setup > Start Push Button Method 2 Follow the instructions on the printer display.
Additional printer setup 55 Changing port settings after installing a new network Internal Solutions Port When a new Lexmark Internal Solutions Port (ISP) is installed in the printer, the printer configurations on computers that access the printer must be updated since the printer will be assigned a new IP address. All computers that access the printer must be updated with this new IP address.
Additional printer setup 56 6 Type the new IP address in the “Printer Name or IP Address” field. 7 Click OK > Close. For Macintosh users 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Add the printer.
Additional printer setup 57 2 Install the printer driver. a Obtain a copy of the software installer package. • From the Software and Documentation CD that came with your printer • From our Web site: Go to www.lexmark.
Additional printer setup 58 In Windows 7 or earlier 1 Click , or click Start and then click Run. 2 In the Start Search or Run dialog, type devmgmt.msc. 3 Press Enter or click OK. b Double‑click Ports (COM & LPT) to expand the list of available ports. c Do either of the following: • Press and hold the COM port where you attached the serial cable to your computer (example: COM1). • Right‑click the COM port where you attached the serial cable to your computer (example: COM1).
Loading paper and specialty media 59 Loading paper and specialty media The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 235 and “Storing paper” on page 77.
Loading paper and specialty media 60 1 2 Squeeze, and then slide the width guide tab to the correct position for the size of the paper you are loading.
Loading paper and specialty media 61 3 Squeeze, and then slide the length guide tab to the correct position for the size of the paper you are loading. 1 EC EX R A4 LT L LG B5 2 A5 A6 A 4 LT R EX EC B5 A 5 Notes: • For some paper sizes like letter, legal, and A4, squeeze, and then slide the length guide tab backward to accommodate their length. • When loading legal‑size paper, the length guide extends beyond the base leaving the paper exposed to dust.
Loading paper and specialty media 62 4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 5 Load the paper stack with the printable side facedown. • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not, and whether two sided printing is needed.
Loading paper and specialty media 63 Without an optional staple finisher With an optional staple finisher One‑sided printing One‑sided printing Two‑sided (duplex) printing Two‑sided (duplex) printing • Make sure the paper is below the maximum paper fill indicator located on the side of the width guide. Overfilling may cause paper jams.
Loading paper and specialty media 64 6 Insert the tray. 7 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray. Note: Set the correct paper size and paper type to avoid paper jams and print quality problems. Loading the multipurpose feeder Use the multipurpose feeder when printing on different paper sizes and types or specialty media, such as card stock, transparencies, paper labels, and envelopes.
Loading paper and specialty media a Pull the multipurpose feeder extender. b Pull the extender gently so that the multipurpose feeder is fully extended and open.
Loading paper and specialty media 66 2 Squeeze the tab on the left width guide, and then move the guides for the paper you are loading. 3 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. • Hold transparencies by the edges. Flex the stack of transparencies back and forth to loosen them, and then fan them. Straighten the edges on a level surface.
Loading paper and specialty media Notes: • Do not force paper or specialty media into the multipurpose feeder. • Make sure the paper or specialty media is below the maximum paper fill indicator located on the paper guides. Overfilling may cause paper jams. • Load paper, transparencies, and card stock with the recommended printable side faceup and the top edge entering the printer first. For more information on loading transparencies, see the packaging that the transparencies came in.
Loading paper and specialty media • Load letterhead faceup with the top edge entering the printer first. For two‑sided (duplex) printing, load letterhead facedown with the bottom edge entering the printer first.
Loading paper and specialty media 69 • Load envelopes with the flap on the left side facedown. Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives. These envelopes may severely damage the printer. 5 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper or specialty media loaded in the multipurpose feeder.
Loading paper and specialty media 70 Linking and unlinking trays When the paper size and paper type for any trays are the same, the printer links those trays. When one linked tray becomes empty, paper feeds from the next linked tray. We recommend giving all unique paper, such as letterhead and different colored plain papers, a different custom type name so that the trays they are in do not automatically link.
Loading paper and specialty media Using the printer control panel 1 From the home screen, navigate to: > Paper Menu > Custom Names 2 Select a custom name, and then type a custom paper type name. 3 Touch . 4 Touch Custom Types, and then verify that the new custom paper type name has replaced the custom name. Assigning a custom paper type Using the Embedded Web Server Assign a custom paper type name to a tray when linking or unlinking trays.
Loading paper and specialty media 72 • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Paper Menu > Custom Types. 3 Select a custom name you want to configure, then select a paper or specialty media type, and then click Submit. Using the printer control panel 1 From the home screen, navigate to: > Paper Menu > Custom Types 2 Select a custom name you want to configure, and then touch .
Paper and specialty media guide 73 Paper and specialty media guide Using specialty media Tips on using letterhead • • • • Use letterhead designed specifically for laser printers. Print samples on the letterhead being considered for use before buying large quantities. Before loading letterhead, flex, fan, and straighten the stack to prevent sheets from sticking together. Page orientation is important when printing on letterhead.
Paper and specialty media guide 74 – Have any exposed adhesive when the flap is in the sealed or closed position – Have bent corners – Have rough, cockle, or laid finishes • Adjust the width guides to fit the width of the envelopes. Note: A combination of high humidity (over 60%) and high printing temperature may wrinkle or seal envelopes. Tips on using labels Print samples on the labels being considered for use before buying large quantities. Note: Use only paper label sheets.
Paper and specialty media guide 75 • Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces semi‑liquid and volatile components into the printer. • Use grain short card stock when possible. Paper guidelines Selecting the correct paper or specialty media reduces printing problems. For the best print quality, try a sample of the paper or specialty media before buying large quantities.
Paper and specialty media guide 76 For 60–90‑g/m2 (16–24‑lb) bond paper, grain long paper is recommended. Fiber content Most high‑quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton can negatively affect paper handling.
Paper and specialty media guide 77 Use papers printed with heat‑resistant inks designed for use in xerographic copiers. The ink must be able to withstand temperatures up to 230°C (446°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks that are oxidation‑set or oil‑based generally meet these requirements; latex inks might not. When in doubt, contact the paper supplier.
Paper and specialty media guide 78 Supported paper sizes, types, and weights Supported paper sizes Paper size and dimension Standard 550‑sheet tray Optional 250‑ or Multipurpose 550‑sheet tray feeder ADF Scanner glass Duplex mode X X X X X X X X Business card X X 3x5 X 4x6 X X A4 210 x 297 mm (8.27 x 11.7 in.) A5 X 148 x 210 mm (5.83 x 8.27 in.) A6 X X 105 x 148 mm (4.13 x 5.83 in.) X JIS B5 182 x 257 mm (7.17 x 10.1 in.) Letter 215.9 x 279.4 mm (8.5 x 11 in.) Legal 215.9 x 355.
Paper and specialty media guide 79 Paper size and dimension Standard 550‑sheet tray Optional 250‑ or Multipurpose 550‑sheet tray feeder ADF Scanner glass Duplex mode Universal* 76.2 x 76.2 mm to 215.9 x 359.92 mm (3 x 3 in. to 8.5 x 14.17 in.) 7 3/4 Envelope (Monarch) X X X X X X X X X X X X X X X X X X X X X X X X X B5 Envelope 176 x 250 mm (6.93 x 9.84 in.) X X X X X Other Envelope X X X X X 98.4 x 190.5 mm (3.875 x 7.5 in.) 9 Envelope 98.4 x 226.1 mm (3.
Paper and specialty media guide Paper type 80 Standard 250‑ or Multipurpose 550‑sheet tray 550‑sheet tray feeder Duplex mode ADF Scanner glass Recycled Paper labels Bond X X X X X X X Envelope2 Rough envelope Letterhead Preprinted Colored paper Light paper Heavy paper Rough/Cotton X Custom Type [x] 1 Transparencies are supported only in the 250‑sheet tray. 2 Use envelopes that lie flat when individually placed on a table facedown.
Paper and specialty media guide 81 Paper size Dimensions Staple finisher 7 3/4 Envelope (Monarch) 98 x 191 mm (3.9 x 7.5 in.) X 9 Envelope 98 x 225 mm (3.9 x 8.9 in.) X 10 Envelope 105 x 241 mm (4.1 x 9.5 in.) X DL Envelope 110 x 220 mm (4.3 x 8.7 in.) X C5 Envelope 162 x 229 mm (6.38 x 9.01 in.) X B5 Envelope 176 x 250 mm (6.93 x 9.84 in.) X Other Envelope 98 x 162 mm (3.9 x 6.4 in.) to 176 x 250 mm (6.9 x 9.8 in.
Printing 82 Printing Printing forms and a document Printing forms Use the Forms and Favorites application to quickly and easily access frequently used forms or other information that is regularly printed. Before you can use this application, first set it up on the printer. For more information, see “Setting up Forms and Favorites” on page 22.
Printing 83 Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Print Settings > Quality Menu > Toner Darkness. 3 Adjust the toner darkness, and then click Submit.
Printing 84 • If you insert the flash drive while the printer is processing other print jobs, then Busy appears on the printer display. After these print jobs are processed, you may need to view the held jobs list to print documents from the flash drive. Warning—Potential Damage: Do not touch the USB cable, any wireless network adapter, any connector, the memory device, or the printer in the areas shown while actively printing, reading, or writing from the memory device. Loss of data can occur.
Printing 85 Recommended flash drives File type • Lexar JumpDrive FireFly (512MB and 1GB) • SanDisk Cruzer Micro (512MB and 1GB) • Sony Micro Vault Classic (512MB and 1GB) Documents: • .pdf • .xps Images: • • • • • • • • .dcx .gif .jpeg or .jpg .bmp .pcx .tiff or .tif .png .
Printing 86 2 Touch Submit. Printing confidential and other held jobs Note: Confidential and Verify print jobs are automatically deleted from memory after printing. Repeat and Reserve jobs are held in the printer until you delete them. For Windows users 1 With a document open, click File > Print. 2 Click Properties, Preferences, Options, or Setup. 3 Click Print and Hold. 4 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name.
Printing 87 • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Security > Confidential Print Setup. 3 Modify the settings: • Set a maximum number of PIN entry attempts. When a user exceeds that number, all of the jobs for that user are deleted. • Set an expiration time for confidential print jobs. When a user has not printed the jobs within that time, all of the jobs for that user are deleted. 4 Click Submit to save the modified settings.
Printing In Windows 8 From the Search charm, type run, and then navigate to: Apps list > Run > type control printers > OK In Windows 7 or earlier a Click or click Start, and then click Run. b In the Start Search or Run dialog, type control printers. c Press Enter, or click OK. 2 Double‑click the printer icon. 3 Select the print job you want to cancel. 4 Click Delete.
Copying 89 Copying Automatic document feeder (ADF) Scanner glass Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). Making copies Making a quick copy 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Copying 90 3 From the home screen, navigate to: Copy > specify the copy settings > Copy It Copying using the scanner glass 1 Place an original document facedown on the scanner glass in the upper left corner. 2 From the home screen, navigate to: Copy > specify the copy settings > Copy It If you have more pages to scan, then place the next document on the scanner glass, and then touch Scan the next page. 3 Touch Finish the Job.
Copying 91 3 Navigate to: Copy to > select the tray that contains transparencies > Copy It If there are no trays that contain transparencies, then navigate to: Manual Feeder > > select the size of the transparencies > > Transparency > 4 Load transparencies into the multipurpose feeder, and then touch Copy It. Copying on letterhead 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Copying 92 Making copies using paper from a selected tray 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides.
Copying 93 • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the home screen, navigate to: Copy > Copy from > Mixed Sizes > 4 Navigate to: Copy to > Letter > > Copy It The scanner identifies the different paper sizes as they are scanned, and then scales the mixed paper sizes to fit on the paper size selected.
Copying 94 4 From the Scale area, touch or to decrease or increase the value by 1%. Touching “Copy to” or “Copy from” after setting Scale manually changes the scale value back to Auto. Note: Auto is the factory default setting. This automatically adjusts the scan image of the original document to fit the size of the paper onto which you are copying. 5 Touch Copy It. Adjusting copy quality 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Copying 95 Collated Not collated 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides.
Copying 96 Notes: • Make sure to set the paper size to letter, legal, A4, or JIS B5. • Make sure to set the copy size to 100%. 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly.
Copying 97 Placing information on copies Placing a header or footer on pages 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly.
Copying 98 Canceling a copy job while pages are being printed 1 From the printer control panel, touch Cancel Job or press on the keypad. 2 Touch the job you want to cancel, and then touch Delete Selected Jobs. Note: If you press on the keypad, then touch Resume to return to the home screen. Understanding the copy options Copy from This option opens a screen where you can select the paper size of the original document. • Touch the paper size that matches the original document.
Copying 99 Collate This option keeps the pages of a print job stacked in sequence when printing multiple copies of the document. Copies This option lets you set the number of copies to be printed. Content This option lets you set the original document type and source. Select from the following content types: • • • • Text—The content of the original document is mostly text or line art. Text/Photo—The original document is a mixture of text, graphics, and photos.
E-mailing 100 E-mailing Automatic document feeder (ADF) Scanner glass Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). You can use the printer to e‑mail scanned documents to one or more recipients in a number of ways. You can type the e‑mail address, use a shortcut number, or use the address book.
E-mailing 101 3 Enter the appropriate information, and then click Submit. Creating an e-mail shortcut Creating an e-mail shortcut using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly.
E-mailing 102 E-mailing a document You can use the printer to e‑mail scanned documents to one or more recipients in a number of ways. You can type the e‑mail address, use a shortcut number, or use the address book. You can also use the Multi Send or MyShortcut application from the printer home screen. For more information, see “Activating the home screen applications” on page 22.
E-mailing 103 Sending an e‑mail using the address book 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides.
E-mailing 104 3 From the home screen, navigate to: E-mail > Recipient(s) > type the e‑mail address > Done > Send as 4 Touch the button that represents the file type you want to send. • PDF—Create a single file with multiple pages. • Secure PDF—Create an encrypted PDF file that protects the file contents from unauthorized access. • TIFF—Create multiple files or a single file. If Multi-page TIFF is turned off in the Settings menu of the Embedded Web Server, then TIFF saves one page in each file.
E-mailing 105 Darkness This option lets you adjust how light or dark your scanned documents are in relation to the original document. Resolution This option lets you adjust the output quality of your e-mail. Increasing the image resolution increases the e-mail file size and the time needed to scan your original document. Decreasing the image resolution reduces the file size. Send As This option lets you set the output type for the scan image.
E-mailing 106 Page Setup This option lets you change the following settings: • Sides (Duplex)—This specifies if the original document is printed on only one side or on both sides of the paper. This also identifies what needs to be scanned for inclusion in the e-mail. • Orientation—This specifies the orientation of the original document, and then changes the Sides (Duplex) and Binding settings to match the orientation.
Faxing 107 Faxing Automatic document feeder (ADF) Use the ADF for multiple‑page documents including two-sided (duplex) pages. Scanner glass Use the scanner glass for single-page documents, book pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). Setting up the printer to fax CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm.
Faxing 108 Initial fax setup Many countries and regions require outgoing faxes to contain the following information in a margin at the top or bottom of each transmitted page, or on the first page of the transmission: fax name (identification of the business, other entity, or individual sending the message) and fax number (telephone number of the sending fax machine, business, other entity, or individual). For more information, see “Regulatory notices for telecommunication terminal equipment” on page 322.
Faxing 109 Choosing a fax connection Scenario 1: Standard telephone line Setup 1: Printer is connected to a dedicated fax line To connect: 1 Connect one end of the telephone cable that came with the printer to the port of the printer. 2 Connect the other end of the telephone cable to an active analog wall jack. Tips for this setup: • You can set the printer to receive faxes automatically (Auto Answer On) or manually (Auto Answer Off).
Faxing 110 Setup 2: Printer is sharing the line with an answering machine Connected to the same telephone wall jack PHONE LINE To connect: 1 Connect one end of the telephone cable that came with the printer to the 2 Connect the other end of the telephone cable to an active analog wall jack. 3 Connect the answering machine to the port of the printer. port of the printer.
Faxing 111 Connected to different wall jacks PHONE LINE To connect: 1 Connect one end of the telephone cable that came with the printer to the port of the printer. 2 Connect the other end of the telephone cable to an active analog wall jack. Tips for this setup: • If you have only one telephone number on your line, then you need to set the printer to receive faxes automatically (Auto Answer On). • Set the printer to pick up calls two rings after the answering machine.
Faxing 112 Setup 3: Printer is sharing the line with a telephone subscribed to voice mail service 02 To connect: 1 Connect one end of the telephone cable that came with the printer to the port of the printer. 2 Connect the other end of the telephone cable to an active analog wall jack. 3 Connect the telephone to the port of the printer. Tips for this setup: • This setup works best if you subscribe to a distinctive ring service.
Faxing 113 Scenario 2: Digital Subscriber Line (DSL) A Digital Subscriber Line splits your regular telephone line into two channels: voice and Internet. Telephone and fax signals travel through the voice channel, and Internet signals pass through the other channel. This way, you can use the same line for analog voice calls (including faxes) and digital Internet access.
Faxing 114 Scenario 3: VoIP telephone service To connect: 1 Connect one end of a telephone cable to the port of the printer. 2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP adapter. The port labeled Phone Line 2 or Fax Port is not always active. You may need to pay extra to your VoIP provider if you want to activate the second phone port. 3 Remove the protective plug from the port of the printer, and then connect the telephone to the port.
Faxing 115 Scenario 4: Digital telephone service through a cable provider Setup 1: Printer is connected directly to a cable modem 1 Connect one end of the telephone cable that came with your printer to the port of the printer. 2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the cable modem. Note: The port labeled Phone Line 2 or Fax Port is not always active. VoIP providers may charge additional cost for activation of the second phone port.
Faxing 116 Setup 2: Printer is connected to a wall jack; cable modem is installed elsewhere in the facility 1 Connect one end of the telephone cable that came with your printer to the port of the printer. 2 Connect the other end of the telephone cable to an active analog telephone wall jack. 3 Connect your analog telephone to the port of the printer.
Faxing 117 If the wall jack or equipment in your facility is not compatible with this type of connection, then you need to use a telephone adapter. An adapter for your country or region may not come with your printer, and you may need to purchase it separately. There may be an adapter plug installed in the port of the printer. If you are using a telephone adapter or a facility port of the printer.
Faxing 118 Connecting the printer to a non‑RJ‑11 wall jack LINE EXT 1 Connect one end of the telephone cable that came with printer to the port of the printer. 2 Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to the wall jack. 3 If you want to connect another device (telephone or answering machine) to the same wall jack, and if the device has a non‑RJ‑11 connector, then connect it directly to the telephone adapter.
Faxing 119 Connecting the printer to a wall jack in Germany The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines. The F port is for telephones. N F N Connect the printer to any of the N ports. N F N PHONE 1 Connect one end of the telephone cable that came the printer to the LINE port of the printer. 2 Connect the other end of the telephone cable to the RJ‑11 adapter, and then connect the adapter to an N port.
Faxing 120 3 If you want to connect a telephone and answering machine to the same wall jack, then connect the devices as shown. Note: Do not remove the adapter plug from the telephone system. port of the printer if you are connecting to a serial or cascaded Connecting to a distinctive ring service A distinctive ring service may be available from your telephone company. This service lets you have multiple telephone numbers on one telephone line, with each telephone number having a different ring pattern.
Faxing 121 Setting the date and time You can set the date and time so that they are printed on every fax you send. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Security > Set Date and Time.
Faxing 122 3 From the home screen, touch Fax. 4 Enter the fax number or a shortcut. Note: To add recipients, touch Next number, and then enter the recipient's telephone number or shortcut number, or search the address book. 5 Touch Fax It. Sending a fax using the computer The printer driver fax option lets you send a print job to the printer, which sends the job as a fax. The fax option works as a normal fax machine, but is controlled through the printer driver instead of the printer control panel.
Faxing 123 • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the printer control panel, press #, and then enter the shortcut number using the keypad. 4 Touch Fax It. Sending a fax using the address book The address book lets you search for bookmarks and network directory servers. For more information on enabling the address book feature, contact your system support person.
Faxing 124 Creating shortcuts Creating a fax destination shortcut using the Embedded Web Server Assign a shortcut number to a single fax number or a group of fax numbers. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly.
Faxing 125 Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the home screen, navigate to: Fax > enter the fax number > Options 4 From the Resolution area, touch the arrows to select the resolution you want.
Faxing 126 • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Fax Settings > Analog Fax Setup > Block No Name Fax. Notes: • This option blocks all incoming faxes that have a private caller ID or have no fax name. • In the Banned Fax List field, enter the phone numbers or type the fax names of specific fax callers you want to block.
Faxing 127 3 From the Held Fax Mode menu, select one of the following: • Off • Always On • Manual • Scheduled 4 If you selected Scheduled, then continue with the following steps: a Click Fax Holding Schedule. b From the Action menu, select Hold faxes. c From the Time menu, select the time you want the held faxes released. d From the Day(s) menu, select the day you want the held faxes released. 5 Click Add.
Faxing 128 Select from the following content sources: • • • • • • • • Color Laser—The original document was printed using a color laser printer. Inkjet—The original document was printed using an inkjet printer. Magazine—The original document is from a magazine. Brochure—The original document is from a brochure. Black/White Laser—The original document was printed using a mono laser printer. Photo/Film—The original document is a photo from film. Newspaper—The original document is from a newspaper.
Faxing 129 Using the advanced options Select from the following settings: • Advanced Imaging—This adjusts the Background Removal, Color Balance, Color Dropout, Contrast, Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, and Sharpness settings before you fax the document. • Custom Job—This combines multiple scanning jobs into a single job. • Edge Erase—This removes smudges or marks around the edges of a document.
Scanning 130 Scanning You can use the printer to send a file to an FTP address. You can type the e‑mail address, use a shortcut number, or use the address book. You can also use the Multi-send or MyShortcut application from the printer home screen. For more information, see “Activating the home screen applications” on page 22. Using Scan to Network Scan to Network lets you scan your documents to network destinations specified by your system support person.
Scanning 131 Creating an FTP shortcut using the printer control panel 1 From the home screen, navigate to: FTP > FTP > type the FTP address > > type a name for the shortcut > Done 2 Verify that the shortcut name and number are correct, and then touch OK. Notes: • If the name or number is incorrect, then touch Cancel, and then reenter the information. • If you enter a number that is already in use, then you are prompted to select another number.
Scanning 132 • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the home screen, navigate to: FTP > FTP > > type the name of the recipient > Search 4 Touch the name of the recipient. Note: To search for additional recipients, touch New Search, and then type the name of the next recipient. 5 Touch > Send It. Scanning to a computer or flash drive You can use the printer to send a scanned file.
Scanning 133 4 Select a location on your computer where you want to save the scan image. 5 Type a scan name, and then a user name. Note: The scan name is the name that appears in the Scan Profile list on the display. 6 Click Submit. Note: Clicking Submit automatically assigns a shortcut number. You can use this shortcut number when you are ready to scan your documents. 7 Review the instructions on the Scan Profile screen.
Scanning 134 3 Select your printer from the list. Note: To identify your printer, print a network setup page, and then look for “Fully Qualified Domain Name” in the TCP/IP section. 4 Click Next > Close. 5 Depending on your device, do either of the following:. • Press and hold the printer you want to configure. • Right‑click the printer you want to configure. 6 From the menu that appears, select Scan Properties or Properties, and then change the settings as necessary.
Scanning 135 Using the ScanBack Utility You can use the Lexmark ScanBackTM Utility instead of the Embedded Web Server to create scan‑to‑computer profiles. The ScanBack Utility can be downloaded from the Lexmark support Web site at http://support.lexmark.com. 1 Set up your scan‑to‑computer profile: a Launch the ScanBack Utility. b Select the printer. If no printers are listed, then contact your system support person, or click Setup to manually search for an IP address or host name.
Scanning 136 Darkness This option lets you adjust how light or dark the scanned documents are in relation to the original document. Resolution This option lets you adjust the output quality of your file. Increasing the image resolution increases the file size and the time needed to scan your original document. Decreasing the image resolution reduces the file size. Send As This option lets you set the output type for the scan image.
Scanning 137 Page Setup This option lets you change the following settings: • Sides (Duplex)—This specifies if the original document is printed on only one side or on both sides of the paper. • Orientation—This specifies the orientation of the original document, and then changes the Sides (Duplex) and Binding settings to match the orientation. • Binding—This specifies if the original document is bound on the long‑edge or short‑edge side.
Understanding the printer menus 138 Understanding the printer menus Menus list Paper Menu Reports Network/Ports Security Default Source Paper Size/Type Menu Settings Page Device Statistics Active NIC Configure MP Stapler Test Standard USB Edit Security Settings Miscellaneous Security Settings Substitute Size Paper Texture Network Setup Page1 Network [x] Setup Page Parallel [x] Serial [x] Paper Weight Shortcut List SMTP Setup Paper Loading Fax Job Log Security Audit Log Custom Types Fa
Understanding the printer menus 139 Paper menu Default Source menu Use To Default Source Tray [x] Multipurpose Feeder Manual Paper Manual Envelope Set a default paper source for all print jobs. Notes: • Tray 1 (standard tray) is the factory default setting. • From the Paper menu, set Configure MP to "Cassette" for Multipurpose Feeder to appear as a menu setting. • If two trays contain paper of the same size and type, and the trays have the same settings, then the trays are automatically linked.
Understanding the printer menus 140 Use To Tray [x] Type Plain Paper Card Stock Transparency Recycled Labels Vinyl Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x] Specify the type of paper loaded in each tray.
Understanding the printer menus 141 Use To Multipurpose Feeder Type Plain Paper Card Stock Transparency Recycled Labels Vinyl Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x] Specify the paper type loaded in the multipurpose feeder. Manual Paper Size A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal Specify the size of the paper being manually loaded.
Understanding the printer menus 142 Use To Manual Paper Type Plain Paper Card Stock Transparency Recycled Labels Vinyl Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x] Specify the paper type being manually loaded. Manual Envelope Size 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope Specify the envelope size being manually loaded.
Understanding the printer menus 143 Substitute Size menu Use To Substitute Size Off Statement/A5 Letter/A4 All Listed Substitute a specified paper size if the requested paper size is not available. Notes: • All Listed is the factory default setting. All available substitutions are allowed. • Off indicates no size substitutions are allowed. • Setting a substitution lets the job print without a Change Paper message appearing.
Understanding the printer menus 144 Use To Rough Envelope Texture Rough Specify the relative texture of the rough envelopes loaded. Letterhead Texture Smooth Normal Rough Specify the relative texture of the letterhead loaded. Preprinted Texture Smooth Normal Rough Specify the relative texture of the preprinted paper loaded. Colored Texture Smooth Normal Rough Specify the relative texture of the colored paper loaded.
Understanding the printer menus 145 Use To Transparency Weight Light Normal Heavy Specify the relative weight of the transparencies loaded. Recycled Weight Light Normal Heavy Specify the relative weight of the recycled paper loaded. Labels Weight Light Normal Heavy Specify the relative weight of the labels loaded. Bond Weight Light Normal Heavy Specify the relative weight of the bond paper loaded. Envelope Weight Light Normal Heavy Specify the relative weight of the envelope loaded.
Understanding the printer menus 146 Use To Rough/Cotton Weight Light Normal Heavy Specify the relative weight of the cotton or rough paper loaded. Custom [x] Weight Light Normal Heavy Specify the relative weight of the custom paper loaded. Note: Normal is the factory default setting. Notes: • Normal is the factory default setting. • The options appear only when the custom type is supported.
Understanding the printer menus 147 Use To Heavy Loading Duplex Off Determine and set two-sided printing for all print jobs that specify Heavy as the paper type. Rough/Cotton Loading Duplex Off Determine and set two-sided printing for all print jobs that specify Rough or Cotton as the paper type. Custom [x] Loading Duplex Off Determine and set two-sided printing for all print jobs that specify Custom [x] as the paper type. Note: Custom [x] Loading appears only when the custom type is supported.
Understanding the printer menus 148 Custom Scan Sizes menu Use To Custom Scan Size [x] Scan Size Name Width Height Orientation Portrait Landscape 2 scans per side Off On Specify a custom scan size name and page orientation. Notes: • The custom scan size name replaces Custom Scan Size [x] in the printer menus. • ADF Media Type is the factory default setting for custom scan sizes 3, 4, 5, and 6. • 8.5 inches is the U.S. factory default setting for Width.
Understanding the printer menus 149 Use To Feed Direction Short Edge Long Edge Specify the feed direction if the paper can be loaded in either direction. Notes: • Short Edge is the factory default setting. • Long Edge appears only when the longest edge is shorter than the maximum width supported in the tray.
Understanding the printer menus 150 Use To Print Directory Print a list of all the resources stored in an optional flash memory card or printer hard disk. Notes: • Job Buffer Size must be set to 100%. • Make sure the optional flash memory or printer hard disk is working and installed correctly. Asset Report Print a report containing asset information including the printer serial number and model name. The report contains text and UPC bar codes that can be scanned into an asset database.
Understanding the printer menus 151 Use To NPA Mode Off Auto Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol. Notes: • Auto is the factory default setting. • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated. Network Buffer Auto 3KB to [maximum size allowed] Set the size of the network input buffer.
Understanding the printer menus 152 Network Card menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > Network Card • Network/Ports > Network [x] > Network [x] Setup > Network Card Use To View Card Status Connected Disconnected View the connection status of the network card. View Card Speed View the speed of an active network card. Network Address UAA LAA View the network addresses.
Understanding the printer menus 153 Use To Enable BOOTP On Off Specify the BOOTP address assignment setting. Enable AutoIP Yes No Specify the Zero Configuration Networking setting. Enable FTP/TFTP Yes No Enable the built-in FTP server, which lets you send files to the printer using File Transfer Protocol. Enable HTTP Server Yes No Enable the built-in Web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a Web browser.
Understanding the printer menus 154 Use To Auto Configuration On Off Specify whether or not the wireless network adapter accepts the automatic IPv6 address configuration entries provided by a router. View Hostname Set the host name. View Address Note: These settings can be changed only from the Embedded Web Server. View Router Address Enable DHCPv6 On Off Note: On is the factory default setting. Enable DHCPv6 in the printer. Note: On is the factory default setting.
Understanding the printer menus 155 Use To View Security Mode View the encryption method for the wireless network. AppleTalk menu Note: This menu appears only in printer models that are connected to an Ethernet network or when an optional wireless network adapter is installed.
Understanding the printer menus 156 Use To NPA Mode On Off Auto Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol. Notes: • Auto is the factory default setting. Auto sets the printer to examine data, determine the format, and then process it appropriately. • The printer automatically restarts when changing the setting from the printer control panel. The menu selection is then updated.
Understanding the printer menus 157 Use To ENA Gateway yyy.yyy.yyy.yyy Set the gateway information for an external print server. Note: This menu is available only when the printer is attached to an external print server through the USB port. SMTP Setup menu Use To Primary SMTP Gateway Specify SMTP server gateway and port information. Primary SMTP Gateway Port Note: 25 is the default SMTP gateway port.
Understanding the printer menus 158 Use To Device‑Initiated E‑mail None Use Device SMTP Credentials Specify what credentials will be used when communicating to the SMTP server. Notes: User‑Initiated E‑mail None Use Device SMTP Credentials Use Session User ID and Password Use Session E‑mail address and Password Prompt user • None is the factory default setting for Device‑Initiated E‑mail and User‑Initiated E‑mail.
Understanding the printer menus 159 Use To Edit Access Controls Administrative Menus Function Access Management Solutions Cancel jobs at the Device Control access to printer menus, firmware updates, held jobs, and other access points.
Understanding the printer menus 160 Use To LDAP Certificate Verification Demand Try Allow Never Allow the user to request a server certificate. Notes: • “Demand” means a server certificate is requested. If a bad certificate is provided or if no certificate is provided, then the session is terminated immediately. “Demand” is the factory default setting. • “Try” means a server certificate is requested. If no certificate is provided, then the session proceeds normally.
Understanding the printer menus 161 Use To Verify Job Expiration Off 1 hour 4 hours 24 hours 1 week Set a limit on how long the printer stores print jobs needing verification. Reserve Job Expiration Off 1 hour 4 hours 24 hours 1 week Set a limit on how long the printer stores print jobs for printing at a later time. Note: Off is the factory default setting.
Understanding the printer menus 162 Use To Delete Log Yes No Specify whether or not audit logs are deleted. Configure Log Enable Audit Yes No Enable Remote Syslog No Yes Remote Syslog Facility 0–23 Severity of events to log 0–7 Specify how and whether or not audit logs are created. Note: Yes is the factory default setting. Notes: • Enable Audit determines if events are recorded in the secure audit log and remote syslog. No is the factory default setting.
Understanding the printer menus 163 Use To Enable Authentication On Off Change the authentication setting to On or Off. Note: Off is the factory default setting. Settings menu General Settings menu Use To Display Language English Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Greek Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese Set the language of the text appearing on the printer display.
Understanding the printer menus 164 Use To ADF Loaded Beep Enabled Disabled Specify whether or not the ADF sounds a beep when paper is loaded. ADF Multi‑feed Sensor On Off Detect when the ADF picks more than one sheet of paper at once. Quiet Mode Off On Reduce the amount of noise produced by the printer. Note: Enabled is the factory default setting. Note: On is the factory default setting. Notes: • Off is the factory default setting. This supports the performance specifications for your printer.
Understanding the printer menus 165 Use To Keyboard Keyboard Type English Francais Francais Canadien Deutsch Italiano Espanol Greek Dansk Norsk Nederlands Svenska Suomi Portuguese Russian Polski Swiss German Swiss French Korean Magyar Turkce Cesky Simplified Chinese Traditional Chinese Japanese Custom Key [x] Specify a language and custom key information for the printer keyboard. The additional tabs enable access to accent marks and symbols from the keyboard.
Understanding the printer menus 166 Use To Displayed Information Left side Right side Custom Text [x] Specify what is displayed on the upper left and right corners of the home screen. For the Left side and Right side menus, select from the following options: None IP Address Hostname Contact Name Location Date/Time mDNS/DDNS Service Name Zero Configuration Name Custom Text [x] Model Name Notes: • IP Address is the factory default setting for “Left side.
Understanding the printer menus 167 Use To Displayed Information (continued) Paper Jam Load Paper Service Errors Customize the displayed information for Paper Jam, Load Paper, and Service Errors menus. Select from the following options: Display Yes No Message to display Default Alternate Default [text entry] Alternate [text entry] Notes: • No is the factory default setting for Display. • Default is the factory default setting for “Message to display.
Understanding the printer menus 168 Use To Screen Brightness 20–100 Specify the brightness of the printer control panel screen. One Page Copy Off On Set copies from the scanner glass to only one page at a time. Output Lighting Normal/Standby Mode Off Dim Bright Set the amount of light from the standard output bin. Note: 100 is the factory default setting. Note: Off is the factory default setting. Notes: • Dim is the factory default setting if Eco-Mode is set to Energy or Energy/Paper.
Understanding the printer menus 169 Use To Web Page Refresh Rate 30–300 Specify the number of seconds between Embedded Web Server refreshes. Note: 120 is the factory default setting. Contact Name Specify a contact name for the printer. Note: The contact name will be stored on the Embedded Web Server. Location Specify the location of the printer. Note: The location will be stored on the Embedded Web Server.
Understanding the printer menus 170 Use To Timeouts Timeout Disabled 1–3 hours 6 hours 1–3 days 1–2 weeks 1 month Set the printer to operate at a low power state. Timeouts Hibernate Timeout on Connection Hibernate Do Not Hibernate Set the printer to Hibernate Timeout even when there is an active Ethernet or phone connection. Timeouts Screen Timeout 15–300 Set the amount of time in seconds the printer waits before returning the printer display to Ready state.
Understanding the printer menus 171 Use To Timeouts Job Hold Timeout 5–255 Set the amount of time the printer waits for user intervention before it holds jobs that require unavailable resources and continues to print other jobs in the print queue. Notes: • 30 is the factory default setting. • This menu item appears only when a formatted, working printer hard disk is installed. Error Recovery Auto Reboot Reboot when idle Reboot always Reboot never Automatically reboot the printer.
Understanding the printer menus 172 Use To Press and Hold Sleep Button Do Nothing Sleep Hibernate Determine how the printer responds to a long press of the Sleep button when the printer is idle. Notes: • Do Nothing is the factory default setting. • Sleep or Hibernate sets the printer to operate at a lower power configuration. • If the printer is in Sleep Mode, then the touch screen appears off and the Sleep button turns amber in color.
Understanding the printer menus 173 Use To Sides (Duplex) 1 sided to 1 sided 1 sided to 2 sided 2 sided to 1 sided 2 sided to 2 sided Specify whether an original document is two‑sided (duplex) or one‑sided, and then specify whether the copy should be two‑sided or one‑sided. Notes: • 1 sided to 1 sided—The original document has print on one side and the copy will also have print on one side. • 1 sided to 2 sided—The original document has print on one side, while the copy will have print on both sides.
Understanding the printer menus 174 Use To Original Size Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in. ID Card Specify the paper size of the original document. Copy To Source Tray [x] Auto Size Match Multipurpose Feeder Specify the paper source for copy jobs. Transparency Separators On Off Place a sheet of paper between transparencies.
Understanding the printer menus 175 Use To Header/Footer [Location] Off Date/Time Page number Custom text Print on All pages First page only All but first page Custom text Specify the header or footer information and its location on the page. For the location, select from the following options: • • • • • • Top left Top middle Top right Bottom left Bottom middle Bottom right Notes: • Off is the factory default setting for the location. • “All pages” is the factory default setting for “Print on.
Understanding the printer menus 176 Use To Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specify which color to drop during scanning and to adjust the dropout setting for each color threshold. Contrast 0–5 Best for content Specify the contrast used for the copy job. Mirror Image Off On Create a mirror image of the original document. Negative Image Off On Create a negative image of the original document.
Understanding the printer menus 177 Use To Fax Name Specify the name of the fax in the printer. Fax Number Specify the number assigned to the fax. Fax ID Fax Name Fax Number Specify how the fax is identified. Enable Manual Fax On Off Set the printer to fax manually, which requires a line splitter and a telephone handset. Notes: • Off is the factory default setting. • Use a regular telephone to answer an incoming fax job and to dial a fax number.
Understanding the printer menus 178 Use To Fax Cover Page Fax Cover Page Off by default On by default Never use Always use Include to Field On Off Include from Field On Off From Include Message Field On Off Message Include Logo On Off Include Footer [x] On Off Footer [x] Configure the fax cover page. Use To Resolution Standard Fine 200 dpi Super Fine 300 dpi Ultra Fine 600 dpi Specify quality in dots per inch (dpi).
Understanding the printer menus 179 Use To Original Size Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in. Specify the paper size of the original document. Sides (Duplex) Off Long edge Short edge Specify the page orientation of text and graphics. Note: Mixed Sizes is the U.S. factory default setting. A4 is the international factory default setting.
Understanding the printer menus 180 Use To Dialing Prefix Rules Prefix Rule [x] Establish a dialing prefix rule. Automatic Redial 0–9 Specify the number of times the printer tries to send the fax to a specified number. Redial frequency 1–200 Specify the number of minutes between redials. Behind a PABX Yes No Enable or disable switchboard blind dialing without a dial tone. Enable ECM Yes No Enable or disable Error Correction Mode for fax jobs.
Understanding the printer menus 181 Use To Background Removal ‑4 to 4 Adjust the amount of background visible on a scanned image. Contrast 0–5 Best for content Specify the contrast in the scanned image. Mirror Image Off On Create a mirror image of the original document. Negative Image Off On Create a negative image of the original document. Shadow Detail ‑4 to 4 Adjust the amount of shadow detail visible. Adjust ADF Skew Auto Off On Correct the slight skew in the scanned image.
Understanding the printer menus 182 Use To Auto Reduction On Off Scale an incoming fax job so that it fits the size of the paper loaded in the designated fax source. Paper Source Auto Tray [x] Multipurpose Feeder Specify the paper source for printing incoming fax jobs. Sides (Duplex) Off On Enable two‑sided (duplex) printing for incoming fax jobs. Separator Sheets Off Before Job After Job Enable the printer to include separator sheets for incoming fax jobs.
Understanding the printer menus 183 Use To Block No Name Fax Off On Enable blocking of incoming faxes sent from devices with no station ID or fax ID specified. Banned Fax List Enable the list of blocked fax numbers stored in the printer. Note: Off is the factory default setting. Note: You can enter up to 512 characters. Use To Transmission Log Print log Do not print log Print only for error Enable printing of a transmission log after each fax job.
Understanding the printer menus 184 Use To Ringer Volume Off On Control the fax speaker ringer volume. Use To All Rings Single Ring Only Double Ring Only Triple Ring Only Single or Double Rings Only Single or Triple Rings Only Double or Triple Rings Only Note: On is the factory default setting. Specify ring patterns when the printer is answering calls. Note: All Rings is the factory default setting.
Understanding the printer menus 185 Use To E‑mail Server Setup Web Link Setup Server Login Password Path File Name Web Link Define the e‑mail server path name, for example: /directory/path. Format PDF (.pdf) Secure PDF TIFF (.tif) JPEG (.jpg) XPS (.xps) Specify the format of the scanned file. PDF Version 1.2–1.7 A–1a Set the version of the PDF file that will be scanned for e‑mailing. Content Type Text Graphics Text/Photo Photo Specify the content of the original document.
Understanding the printer menus 186 Use To Orientation Portrait Landscape Specify the page orientation of the scanned image. Original Size Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in. Specify the paper size of the document being scanned. Sides (Duplex) Off Long edge Short edge Specify the page orientation of text and graphics.
Understanding the printer menus 187 Use To Photo Default 5–90 Set the quality of a photo image in relation to file size and the quality of the image. E‑mail images sent as Attachment Web Link Specify how the images are sent. Use Multi‑Page Tiff On Off Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑e-mail job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job.
Understanding the printer menus 188 Use To Color Balance Cyan‑Red Magenta-Green Yellow-Blue Enable an equal balance of colors in the output. Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specify which color to drop during scanning and to adjust the dropout setting for each color threshold. Contrast 0–5 Best for content Specify the contrast of the output.
Understanding the printer menus 189 Use To Use cc:/bcc: Off On Enable the use of the cc and bcc fields. Note: Off is the factory default setting. FTP Settings menu Use To Format PDF (.pdf) Secure PDF (.pdf) TIFF (.tif) JPEG (.jpg) XPS (.xps) Specify the format of the file for FTP sending. PDF Version 1.2–1.7 A–1a Set the version level of the PDF file for FTP sending. Content Type Text Graphics Text/Photo Photo Specify the content of the original document.
Understanding the printer menus 190 Use To Orientation Portrait Landscape Specify the page orientation of the scanned image. Original Size Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in. Specify the paper size of the original document. Sides (Duplex) Off Long edge Short edge Specify the page orientation of text and graphics.
Understanding the printer menus 191 Use To Photo Default 5–90 Set the quality of a photo image in relation to the file size and quality of the image. Use Multi‑Page TIFF On Off Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑FTP job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job. Note: 50 is the factory default setting.
Understanding the printer menus 192 Use To Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specify which color to drop during scanning, and how much the dropout is increased or decreased. Contrast 0–5 Best for content Specify the contrast of the output. Mirror Image Off On Create a mirror image of the original document. Negative Image Off On Create a negative image of the original document.
Understanding the printer menus 193 Flash Drive menu Scan Settings Use To Format PDF (.pdf) Secure PDF TIFF (.tif) JPEG (.jpg) XPS (.xps) Specify the format of the file to be sent through FTP. PDF Version 1.2–1.7 A‑1a Set the version of the PDF file to be sent through FTP. Content Type Text Graphics Text/Photo Photo Specify the content of the original document.
Understanding the printer menus 194 Use To Original Size Letter Legal Executive Folio Statement Oficio (Mexico) Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Difficult Media Letter Difficult Media A5 Difficult Media Legal Difficult Media A4 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in. Specify the paper size of the original document. Sides (Duplex) Off Long Edge Short Edge Specify the page orientation of text and graphics. Note: Letter is the U.S. factory default setting.
Understanding the printer menus 195 Use To Use Multi‑Page TIFF On Off Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan to FTP job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page. Notes: • On is the factory default setting. • This menu item applies to all scan functions. File Name Type a base file name. Note: A maximum of 53 characters is allowed.
Understanding the printer menus 196 Print Settings Copies 1–999 Specify a default number of copies for each print job. Note: 1 is the factory default setting. Paper Source Set a default paper source for all print jobs. Tray [x] Note: Tray 1 is the factory default setting. Multipurpose Feeder Manual Paper Manual Envelope Collate (1,1,1) (2,2,2) (1,2,3) (1,2,3) Stack the pages of a print job in sequence when printing multiple copies.
Understanding the printer menus 197 Paper Saver Orientation Specify the orientation of a multiple‑page document. Auto Note: Auto is the factory default setting. The printer chooses between portrait and landscape. Landscape Portrait Paper Saver Border None Solid Print a border on each page image. Separator Sheets Off Between Copies Between Jobs Between Pages Specify whether blank separator sheets are inserted. Note: None is the factory default setting. Notes: • Off is the factory default setting.
Understanding the printer menus 198 Use To Job Waiting On Off Specify that print jobs be removed from the print queue if they require unavailable printer options or custom settings. Print jobs removed from the print queue are stored in a separate print queue, so other jobs print normally. When the missing information or options are obtained, the stored jobs print. Notes: • Off is the factory default setting. • This menu setting appears only when a formatted, working printer hard disk is installed.
Understanding the printer menus 199 Use To Print All Order Alphabetical Oldest First Newest First Specify the order in which held and confidential jobs are printed when Print All is selected. Note: Alphabetical is the factory default setting. Print jobs always appear in alphabetical order on the printer control panel. Finishing menu Use To Sides (Duplex) 1 sided 2 sided Specify whether two‑sided (duplex) printing is set as the default for all print jobs.
Understanding the printer menus 200 Use To Separator Sheets Off Between Copies Between Jobs Between Pages Specify whether blank separator sheets are inserted. Notes: • None is the factory default setting. • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to “(1,2,3) (1,2,3).” If Collate is set to “(1,1,1) (2,2,2),” then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
Understanding the printer menus 201 Use To Run Stapler Test Print a report that confirms that the staple finisher is functioning properly. Note: This menu item appears only when a supported staple finisher is installed. Quality menu Use To Print Resolution 300 dpi 600 dpi 1200 dpi 1200 Image Q 2400 Image Q Specify the printed output resolution in dots per inch.
Understanding the printer menus 202 Job Accounting menu Note: This menu item appears only when a formatted, working printer hard disk is installed. Make sure the printer hard disk is not read/write‑ or write‑protected. Use To Job Accounting Log Off On Determine and set if the printer creates a log of the print jobs it receives. Job Accounting Utilities Print and delete log files or export them to a flash drive.
Understanding the printer menus 203 Use To E‑mail Address to Send Logs Specify the e‑mail address to which the printer sends job accounting logs. Log File Prefix Specify the prefix you want for the log file name. Note: The current host name defined in the TCP/IP menu is used as the default log file prefix. Utilities menu Use To Remove Held Jobs Confidential Held Not Restored All Delete confidential and held jobs from the printer hard disk.
Understanding the printer menus 204 Use To Coverage Estimator Off On Provide an estimate of the percentage coverage of toner on a page. The estimate is printed on a separate page at the end of each print job. Note: Off is the factory default setting. XPS menu Use To Print Error Pages Off On Print a page containing information on errors, including XML markup errors. Note: Off is the factory default setting. PDF menu Use To Scale to Fit Yes No Scale page content to fit the selected paper size.
Understanding the printer menus 205 PCL Emul menu Use To Font Source Resident Disk Download Flash All Specify the set of fonts used by the Font Name menu. Notes: • “Resident” is the factory default setting. Resident shows the factory default set of fonts downloaded in the RAM. • “Flash” and “Disk” settings show all fonts resident in that option. • The flash option must be properly formatted and cannot be read/write‑, write‑, or password‑protected.
Understanding the printer menus 206 Use To PCL Emulation Settings Lines per Page 1–255 Specify the number of lines that print on each page. Notes: • 60 is the US factory default setting. 64 is the international default setting. • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the Paper Size and Orientation you want before setting Lines per Page.
Understanding the printer menus 207 Use To Tray Renumber View Factory Defaults MPF Default = 8 T1 Default = 1 T1 Default = 4 T1 Default = 5 T1 Default = 20 T1 Default = 21 Env Default = 6 MPaper Default = 2 MEnv Default = 3 Display the factory default setting assigned to each tray or feeder. Tray Renumber Restore Defaults Yes No Restore all tray and feeder assignments to the factory default settings.
Understanding the printer menus 208 Use To Font Size 1–255 pt Set the default font size for HTML documents. Notes: • 12 pt is the factory default setting. • Font size can be increased in 1‑point increments. Scale 1–400% Scale the default font for HTML documents. Notes: • 100% is the factory default setting. • Scaling can be increased in 1% increments. Orientation Portrait Landscape Set the page orientation for HTML documents. Margin Size 8–255 mm Set the page margin for HTML documents.
Understanding the printer menus 209 Use To Orientation Portrait Landscape Reverse Portrait Reverse Landscape Set the image orientation. Note: Portrait is the factory default setting. Help menu The Help menu consists of a series of Help pages that are stored in the multifunction printer (MFP) as PDF files. They contain information about using the printer and performing various tasks, including copying, scanning, and faxing. English, French, German, and Spanish translations are stored in the printer.
Saving money and the environment 210 Saving money and the environment Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see: • The Notices chapter • The Environmental Sustainability section of the Lexmark Web site at www.lexmark.
Saving money and the environment 211 Saving energy Using Eco‑Mode 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly.
Saving money and the environment 212 Use To On Reduce printer noise. Notes: • Print jobs are processed at a reduced speed. • Printer engine motors do not start until a document is ready to print. There will be a short delay before the first page is printed. Off Use factory default settings. Note: This setting supports the performance specifications of the printer. 3 Click Submit. Adjusting Sleep mode To save energy, decrease the number of minutes the printer waits before it enters Sleep mode.
Saving money and the environment 213 Using Hibernate Mode Hibernate is an ultra‑low power operating mode. When operating in Hibernate mode, the printer is essentially off, and all other systems and devices are powered down safely. Note: The Hibernate and Sleep modes can be scheduled. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen.
Saving money and the environment 214 Using the printer control panel 1 From the printer control panel, navigate to: > Settings > General Settings > Timeouts > Hibernate Timeout 2 Select the amount of time the printer waits after a print job is processed before it enters Hibernate mode. 3 Touch . Using Schedule Power Modes Schedule Power Modes lets you schedule when the printer goes into a reduced power state or into Ready state.
Saving money and the environment 215 Using the printer control panel 1 From the home screen, navigate to: > Settings > General Settings > Screen Brightness 2 In the Screen Brightness field, enter the brightness percentage you want for the display. 3 Touch . Recycling Recycling Lexmark products To return Lexmark products for recycling: 1 Go to www.lexmark.com/recycle. 2 Find the product type you want to recycle, and then select your country or region from the list.
Securing the printer 216 Securing the printer Statement of Volatility Your printer contains various types of memory that can store device and network settings, and user data. Types of memory Description Volatile memory Your printer uses standard Random Access Memory (RAM) to temporarily buffer user data during simple print and copy jobs. Non-volatile memory Your printer may use two forms of non-volatile memory: EEPROM and NAND (flash memory).
Securing the printer 217 Erasing non‑volatile memory • Individual settings, device and network settings, security settings, and embedded solutions—Erase information and settings by selecting Wipe All Settings in the Configuration menu. • Fax data—Erase fax settings and data by selecting Wipe All Settings in the Configuration menu. 1 Turn off the printer. 2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.
Securing the printer 218 • Disk wiping can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks. 5 Touch Back > Exit Config Menu. The printer will perform a power‑on reset, and then return to normal operating mode. Configuring printer hard disk encryption Enable hard disk encryption to prevent loss of sensitive data in the event the printer or its hard disk is stolen. Note: Some printer models may not have a printer hard disk installed.
Securing the printer 219 • A status bar will indicate the progress of the disk wiping task. After the disk has been encrypted, the printer will return to the Enable/Disable screen. 5 Touch Back > Exit Config Menu. The printer will perform a power‑on reset, and then return to normal operating mode.
Maintaining the printer 220 Maintaining the printer Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and supplies, may cause damage to your printer. Cleaning the printer parts Cleaning the printer Note: You may need to perform this task after every few months. Warning—Potential Damage: Damage to the printer caused by improper handling is not covered by the printer warranty. 1 Make sure that the printer is turned off and unplugged from the electrical outlet.
Maintaining the printer Cleaning the scanner glass Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images. 1 Slightly dampen a soft, lint-free cloth or paper towel with water. 2 Open the scanner cover. 3 Clean all the areas shown, and then let them dry. 1 White underside of the scanner cover 2 Scanner glass 3 ADF glass 4 White underside of the ADF cover 4 Close the scanner cover.
Maintaining the printer 222 Checking the status of parts and supplies Checking the status of parts and supplies on the printer control panel From the home screen, touch Status/Supplies > View Supplies. Checking the status of parts and supplies from the Embedded Web Server Note: Make sure the computer and the printer are connected to the same network. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the home screen.
Maintaining the printer 223 Ordering toner cartridges Notes: • The estimated cartridge yield is based on the ISO/IEC 19752 standard. • Extremely low print coverage for extended periods of time may negatively affect actual yield.
Maintaining the printer 224 Part name Lexmark Return Program Regular Imaging unit 500Z 500ZA Ordering staple cartridges Part name Part number Staple cartridges 35S8500 Ordering a maintenance kit Notes: • Using certain types of paper may require more frequent replacement of the maintenance kit. • The separator roller, fuser, pick rollers, transfer roller, and redrive assembly are all included in the maintenance kit and can be individually ordered and replaced if necessary.
Maintaining the printer Replacing supplies Replacing the toner cartridge 1 Press the button on the right side of the printer, and then open the front door. 2 Pull the toner cartridge out using the handle. 3 Unpack the toner cartridge, and then remove all packing materials. 4 Shake the new cartridge to redistribute the toner.
Maintaining the printer 226 5 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. 6 Close the front door. Replacing the imaging unit 1 Press the button on the right side of the printer, and then open the front door.
Maintaining the printer 2 Pull the toner cartridge out using the handle. 3 Lift the green handle, and then pull the imaging unit out of the printer. 4 Unpack the new imaging unit, and then shake it. 5 Remove all packing materials from the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.
Maintaining the printer 228 Warning—Potential Damage: Do not touch the photoconductor drum. Doing so may affect the print quality of future print jobs. 6 Insert the imaging unit into the printer by aligning the arrows on the side rails of the imaging unit with the arrows on the side rails inside the printer. 7 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer. 8 Close the front door.
Maintaining the printer 229 Replacing the staple cartridge 1 Open the stapler door. 2 Pull out the staple cartridge from the finisher. 3 Hold both sides of the empty staple case with your fingers, pull, and then lift the empty staple case from the cartridge.
Maintaining the printer 230 4 Remove the spare staple case from its holder. 5 Insert the spare staple case into the staple cartridge. 1 2 6 Push the staple cartridge into the finisher until it clicks into place. 7 Replace the spare staple case for future use. 8 Close the stapler door.
Maintaining the printer 231 Moving the printer Before moving the printer CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage: • Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet. • Disconnect all cords and cables from the printer before moving it.
Managing the printer 232 Managing the printer Finding advanced networking and administrator information This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server — Security: Administrator's Guide on the Lexmark support Web site at http://support.lexmark.com.
Managing the printer 233 Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Reports, and then click the type of report you want to view.
Managing the printer 234 Restoring factory default settings If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings. For more information, see “Printing a menu settings page” on page 58. If you want a more comprehensive method of restoring the printer factory default settings, then perform the Wipe All Settings option. For more information, see “Erasing non‑volatile memory” on page 217.
Clearing jams 235 Clearing jams Jam error messages appear on the printer display and include the area of the printer where the jam occurred. When there is more than one jam, the number of jammed pages is displayed. Avoiding jams Load paper properly • Make sure paper lies flat in the tray. Correct loading of paper • • • • Incorrect loading of paper Do not remove a tray while the printer is printing. Do not load a tray while the printer is printing.
Clearing jams 236 • Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing tightly against the paper or envelopes. • Push the tray firmly into the printer after loading paper. Use recommended paper • Use only recommended paper or specialty media. • Do not load wrinkled, creased, damp, bent, or curled paper. • Flex, fan, and straighten paper before loading it. • • • • Do not use paper that has been cut or trimmed by hand.
Clearing jams 237 1 9 2 3 4 1 2 8 3 7 5 6 Jam access area Printer control panel message What to do 1 Automatic document feeder (ADF) [x]‑page jam, open ADF to clear jam. [28y.xx] Remove all paper from the ADF tray, and then remove the jammed paper. 2 Standard bin [x]‑page jam, clear standard bin. [20y.xx] Remove the jammed paper. 3 Front door [x]‑page jam, open front door. [20y.xx] Open the front door, then remove the toner cartridge and imaging unit, and then the jammed paper.
Clearing jams 238 [x]‑page jam, open automatic feeder top cover. [28y.xx] 1 Remove all original documents from the ADF tray. Note: The message is cleared when the pages are removed from the ADF tray. 2 Open the ADF cover. 3 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 4 Close the ADF cover. 5 Straighten the edges of the original documents, then load the documents into the ADF, and then adjust the paper guide.
Clearing jams [x]‑page jam, open rear door. [20y.xx] 1 Open the front door to loosen the jammed paper in the rear door. 2 Gently pull down the rear door. CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it. 3 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed.
Clearing jams 4 Close the front and rear door. 5 From the printer control panel, select Done to clear the message and continue printing. [x]‑page jam, open front door. [20y.xx] CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it. 1 Press the button on the right side of the printer, and then open the front door.
Clearing jams 241 2 Pull out the toner cartridge using the handle. 3 Lift the green handle, and then pull out the imaging unit from the printer. Warning—Potential Damage: Do not touch the shiny blue photoconductor drum under the imaging unit. Doing so may affect the quality of future print jobs. 4 Place the imaging unit aside on a flat, smooth surface. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Clearing jams 242 5 Lift the green flap in front of the printer. 6 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 7 Insert the imaging unit by aligning the arrows on the side rails of the unit with the arrows on the side rails inside the printer, and then insert the imaging unit into the printer.
Clearing jams 243 8 Insert the toner cartridge by aligning the side rails of the cartridge with the arrows on the side rails inside the printer, and then insert the cartridge into the printer. 9 Close the front door. 10 From the printer control panel, select Continue to clear the message and continue printing. [x]‑page jam, remove tray 1 to clear duplex. [23y.xx] 1 Pull out the tray completely.
Clearing jams 2 Locate the lever, and then pull it down to release the jam. 3 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 4 Insert the tray. 5 From the printer control panel, touch Done to clear the message and continue printing. [x]‑page jam, clear manual feeder. [25y.xx] 1 From the multipurpose feeder, firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed.
Clearing jams 245 2 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 3 Reload paper into the multipurpose feeder. Note: Make sure the paper guide lightly rests against the edge of the paper. 4 From the printer control panel, touch Done to clear the message and continue printing. [x]‑page jam, open tray [x]. [24y.xx] 1 Pull out the tray completely.
Clearing jams 246 1 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 3 Insert the tray. 4 From the printer control panel, touch Done to clear the message and continue printing.
Clearing jams [x]-page jam, remove all pages from the output bin. Leave paper in bin. [45y.xx] Paper jam in the finisher bin 1 Empty the standard bin. 2 Move the paper guides to the sides. 3 Remove all jammed pages from inside the access areas. Note: Make sure all paper fragments are removed.
Clearing jams 4 If necessary, touch Done from the printer control panel to clear the message and continue printing. Paper jam in the finisher rear door 1 Open the finisher rear door. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed.
Clearing jams 3 Open the finisher narrow door, and then remove any paper fragments inside the narrow door. 4 Close the narrow door.
Clearing jams 5 Close the finisher rear door. 6 If necessary, touch Done from the printer control panel to clear the message and continue printing. Staple jam in the finisher 1 Open the staple access door. 2 Pull out the staple cartridge from the finisher.
Clearing jams 3 Lift the staple guard, and then remove any jammed or loose staples. 4 Press down the staple guard until it clicks into place. 5 Insert staple cartridge back into the finisher until it clicks into place.
Clearing jams 6 Close the staple access door. 7 If necessary, touch Done from the printer control panel to clear the message and continue printing.
Troubleshooting 253 Troubleshooting • • • • • • • • • “Understanding the printer messages” on page 253 “Solving printer problems” on page 268 “Solving print problems” on page 274 “Solving copy problems” on page 299 “Solving fax problems” on page 303 “Solving scanner problems” on page 309 “Solving home screen applications problems” on page 314 “Embedded Web Server does not open” on page 314 “Contacting customer support” on page 315 Understanding the printer messages Cartridge, imaging unit mismatch [41.
Troubleshooting 254 Cartridge nearly low [88.xy] If necessary, touch Continue on the printer control panel to clear the message and continue printing. Cartridge very low, [x] estimated pages remain [88.xy] You may need to replace the toner cartridge very soon. For more information, see the “Replacing supplies” section of the User’s Guide. If necessary, touch Continue on the printer control panel to clear the message and continue printing.
Troubleshooting 255 Check tray [x] connection Try one or more of the following: • Turn off the printer, and then turn it back on. If the error occurs a second time, then: 1 2 3 4 5 6 Turn off the printer. Unplug the power cord from the electrical outlet. Remove the indicated tray. Reattach the tray. Connect the power cord to a properly grounded electrical outlet. Turn the printer back on. If the error occurs again, then: 1 2 3 4 Turn off the printer. Unplug the power cord from the electrical outlet.
Troubleshooting 256 Complex page, some data may not have printed [39] Try one or more of the following: • From the printer control panel, touch Continue to ignore the message and continue printing. • Cancel current print job. • Install additional printer memory. Configuration change, some held jobs were not restored [57] Held jobs are invalidated because of the following possible changes in the printer: • • • • The printer firmware has been updated. The tray for the print job has been removed.
Troubleshooting 257 Error reading USB drive. Remove USB. An unsupported USB device is inserted. Remove the USB device, and then insert a supported one. Error reading USB hub. Remove hub. An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one. Fax memory full From the printer control panel, touch Continue to clear the message. Fax partition inoperative. Contact system administrator.
Troubleshooting 258 Imaging unit nearly low [84.xy] If necessary, touch Continue on the printer control panel to clear the message and continue printing. Imaging unit very low, [x] estimated pages remain [84.xy] You may need to replace the imaging unit very soon. For more information, see the “Replacing supplies” section of the User’s Guide. If necessary, touch Continue on the printer control panel to clear the message and continue printing.
Troubleshooting 259 Insufficient memory, some Held Jobs were deleted [37] From the printer control panel, touch Continue to clear the message. Insufficient memory, some held jobs will not be restored [37] Try one or more of the following: • From the printer control panel, touch Continue to clear the message. • Delete other held jobs to free up additional printer memory.
Troubleshooting 260 Load [paper source] with [paper type] [paper size] [paper orientation] Try one or more of the following: • Load the specified tray or feeder with the correct size and type of paper. • To use the tray or feeder with the correct size and type of paper, touch Finished loading paper on the printer control panel. Note: If the printer finds a tray or feeder that has the correct size and type of paper, then it feeds from that tray or feeder.
Troubleshooting 261 • From the printer control panel, touch Automatically select paper to use the paper loaded in the tray. • Cancel the print job. Maintenance kit low [80.xy] You may need to order a maintenance kit. For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message. If necessary, touch Continue to clear the message and continue printing. Maintenance kit nearly low [80.
Troubleshooting 262 • Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web site at http://support.lexmark.com. No analog phone line connected to modem, fax is disabled. Connect the printer to an analog phone line. Non‑Lexmark [supply type], see User’s Guide [33.xy] Note: The supply type can be a toner cartridge or the imaging unit. The printer has detected a non‑Lexmark supply or part installed in the printer.
Troubleshooting 263 Parallel port [x] disabled [56] Try one or more of the following: • From the printer control panel, touch Continue to clear the message. • Enable the parallel port. From the printer control panel, navigate to: Network/Ports > Parallel [x] > Parallel Buffer > Auto Note: The printer discards any data received through the parallel port. Printer had to restart. Last job may be incomplete. From the printer control panel, touch Continue to clear the message and continue printing.
Troubleshooting 264 Replace maintenance kit, 0 estimated pages remain [80.xy] The printer is scheduled for maintenance. For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact your service representative, and then report the message. Replace all originals if restarting job. Try one or more of the following: • Touch Cancel job to clear the message and cancel the scan job.
Troubleshooting 265 Replace unsupported imaging unit [32.xy] Remove the imaging unit, and then install a supported one to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide. Note: If you do not have a replacement imaging unit, then see the “Ordering supplies” section of the User’s Guide or visit www.lexmark.com.
Troubleshooting 266 SMTP server not set up. Contact system administrator. From the printer control panel, touch Continue to clear the message. Note: If the message appears again, then contact your system support person. Some held jobs were not restored From the printer control panel, touch Continue to delete the indicated job. Note: Held jobs that are not restored remain in the printer hard disk and are inaccessible.
Troubleshooting 267 Too many trays attached [58] 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the extra trays. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on. Unformatted flash detected [53] Try one or more of the following: • From the printer control panel, touch Continue to stop the defragmentation and continue printing. • Format the flash memory.
Troubleshooting 268 Solving printer problems • “Basic printer problems” on page 268 • “Option problems” on page 270 • “Paper feed problems” on page 273 Basic printer problems The printer is not responding Action Yes No Step 1 Go to step 2. Turn on the printer. Make sure the printer is turned on. Is the printer turned on? Step 2 Check if the printer is in Sleep mode or Hibernate mode. Is the printer in Sleep mode or Hibernate mode? Step 3 Press the Sleep button Go to step 3.
Troubleshooting Action 269 Yes No Step 7 Connect the printer Go to step 8. Check if the printer is plugged into any surge protectors, uninterruptible power cord directly to a properly grounded power supplies, or extension cords. electrical outlet. Is the printer plugged into any surge protectors, uninterruptible power supplies, or extension cords? Step 8 Go to step 9.
Troubleshooting 270 Printer display is blank Action Yes No Step 1 The problem is solved. Go to step 2. Press the Sleep button on the printer control panel. Does Ready appear on the printer display? Step 2 Turn off the printer, then wait for about 10 seconds, and then turn the printer back on. The problem is solved. Turn off the printer, and then contact customer support.
Troubleshooting 271 Action Yes No Step 4 a Check if the internal option is selected. The problem is solved. Contact customer support. It may be necessary to manually add the internal option in the printer driver to make it available for print jobs. For more information, see “Updating available options in the printer driver” on page 49. b Resend the print job.
Troubleshooting 272 Cannot detect memory card Action Yes No Make sure the memory card is installed. a Install the memory card. For more information, see “Installing a memory card” on page 30. The problem is solved. Contact customer support. Note: Check if the memory card is securely connected to the printer controller board. b Print a menu settings page, and then check if the card is listed in the Installed Options list.
Troubleshooting 273 Action Yes Step 2 The problem is solved. Contact customer support. Check the cable and the USB or parallel interface card connection. Use the correct cable, and then make sure it is securely connected to the USB or parallel interface card. No Does the USB or parallel interface card operate correctly? Paper feed problems Paper frequently jams Action Yes No Step 1 a Pull out the tray, and then do one or more of the following: Go to step 2. The problem is solved.
Troubleshooting 274 Paper jam message remains after jam is cleared Action Yes No Check the entire paper path for jammed paper. a Remove any jammed paper. Contact customer support. The problem is solved. Action Yes No Turn on Jam Recovery. a From the home screen, navigate to: The problem is solved. Contact customer support. b From the printer control panel, touch Continue to clear the message.
Troubleshooting 275 Error message about reading the flash drive appears Action Yes No Step 1 Go to step 2. Insert the flash drive into the front USB port. Check if the flash drive is inserted into the front USB port. Note: The flash drive will not work if it is inserted into the rear USB port. Is the flash drive inserted into the front USB port? Step 2 Wait until the printer is Go to step 3. Check if the indicator light on the printer control panel is blinking green.
Troubleshooting Action 276 Yes No The problem is solved. Go to step 3. Step 2 a Check if the printer is plugged in and turned on, and if Ready appears on the printer display. b Resend the print job. Do the jobs print? Step 3 The problem is solved. Go to step 4. If an error message appears on the printer display, then clear the message. Note: The printer continues to print after clearing the message.
Troubleshooting 277 Confidential and other held jobs do not print Note: Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs. Action Yes No Step 1 Go to step 2. Select one of the Print and Hold options, and then resend the print job. For more information, see “Printing confidential and other held jobs” on page 86. Open the held jobs folder on the printer display, and then verify that your print job is listed.
Troubleshooting 278 Print job takes longer than expected Action Yes No Step 1 The problem is solved. Go to step 2. Change the environmental settings of the printer. a From the printer control panel, navigate to: > Settings > General Settings b Select Eco‑Mode or Quiet Mode, and then select Off. Note: Disabling Eco-Mode or Quiet Mode may increase the consumption of energy or supplies, or both. Did the job print? Step 2 The problem is solved. Go to step 3.
Troubleshooting 279 Job prints from the wrong tray or on the wrong paper Action Yes No Step 1 a Check if you are printing on paper that is supported by the tray. The problem is solved. Go to step 2. b Resend the print job. Did the job print from the correct tray or on the correct paper? Step 2 The problem is solved. Go to step 3. a From the Paper menu on the printer control panel, set the paper size and type to match the paper loaded in the tray. b Resend the print job.
Troubleshooting 280 Tray linking does not work Notes: • The trays can detect paper length. • The multipurpose feeder does not automatically detect the paper size. You must set the size from the Paper Size/Type menu. Action Yes No Step 1 The problem is solved. Go to step 2. a Open the trays, and then check if they contain paper of the same size and type. • Check if the paper guides are in the correct positions for the size of the paper loaded in each tray.
Troubleshooting 281 Action Yes Step 3 The problem is solved. Contact customer support. Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job. No Did the job print and collate correctly? Unexpected page breaks occur Action Yes No Increase the printing timeout. a From the home screen, navigate to: The problem is solved. Check the original file for manual page breaks.
Troubleshooting Action 282 Yes Contact customer Step 2 a Use a font that is supported by the printer or install the font that you support. want to use on your computer. For more information, contact your system support person. b Resend the print job. No The problem is solved. Do prints still contain characters that have jagged or uneven edges? Printer is printing blank pages Action Yes No Step 1 a Check if there is packing material left on the imaging unit.
Troubleshooting 283 Action Yes No Step 3 Contact customer support. The problem is solved. Yes No Replace the imaging unit, and then resend the print job. Is the printer still printing blank pages? Clipped pages or images Leading edge ABCDE ABCDE ABCDE Trailing edge Action Step 1 Go to step 2. a Move the width and length guides in the tray to the correct positions for the paper loaded. b Resend the print job. The problem is solved.
Troubleshooting 284 Action Yes No Step 4 a Reinstall the imaging unit. 1 Remove the toner cartridge. Contact customer support. The problem is solved. 2 Remove the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. 3 Install the imaging unit, and then the cartridge. b Resend the print job.
Troubleshooting 285 Action Yes No Step 1 Go to step 2. Load paper with the correct paper type and weight in the tray. Go to step 3. Change the paper loaded in the tray to match the paper type and weight specified in the tray settings. Go to step 4. The problem is solved. Contact customer support. The problem is solved. Action Yes No Step 1 Check if Allow Background Removal is set to Off. a From the General Settings menu, set Allow Background Removal to On. b Resend the print job.
Troubleshooting 286 Action Yes No Step 2 The problem is solved. Go to step 3. Adjust the toner darkness to a lighter setting. a From the Quality Menu, select a lower value to reduce toner density. • 4 is the factory default setting. • If Print Mode is set to Black Only, then a setting of 5 increases toner density and darkness for all print jobs. b Resend the print job. Did the background disappear from the prints? Step 3 The problem is solved. Go to step 4. Reinstall the toner cartridge.
Troubleshooting 287 Action Yes No Step 2 Go to step 3. Do one or more of the following: From the printer control panel, set the paper size in the Paper menu to match the paper loaded in the tray. • Specify the paper size from the tray settings to match the paper loaded in the tray. Does the paper size match the paper loaded in the tray? • Change the paper loaded in the tray to match the paper size specified in the tray settings.
Troubleshooting 288 Action Yes No Step 5 a Load paper from a fresh package. Contact customer support. The problem is solved. Yes No Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Is the paper still curled? Print irregularities Leading edge ) ) ABCDE ABCDE ABCDE Trailing edge Action Step 1 Go to step 2.
Troubleshooting 289 Action Yes No Step 5 a Load paper from a fresh package. Go to step 6. The problem is solved. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Do print irregularities still appear? Step 6 Replace the imaging unit, and then resend the print job. Do print irregularities still appear? Contact customer The problem is solved. support at http://support.lexmar k.com or your service representative.
Troubleshooting 290 Print is too dark Action Yes Go to step 2. Step 1 a From the Quality menu on the printer control panel, reduce the toner darkness. No The problem is solved. Note: 8 is the factory default setting. b Resend the print job. Is the print still too dark? Step 2 Go to step 3. a From the printer control panel, set the paper type, texture and weight in the Paper menu to match the paper loaded in the tray. b Resend the print job.
Troubleshooting 291 Action Yes No Step 5 a Load paper from a fresh package. Go to step 6. The problem is solved. Contact customer support. The problem is solved. Yes No Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Is the print still too dark? Step 6 Replace the imaging unit, and then resend the print job. Is the print still too dark? Print is too light Action Go to step 2.
Troubleshooting 292 Action Yes Step 4 From the printer Go to step 5. control panel, change the texture settings in the Paper Texture menu to match the paper you are printing on. Make sure that the paper has no texture or rough finishes. Are you printing on textured or rough paper? Step 5 a Load paper from a fresh package. No Go to step 6. The problem is solved. Go to step 7. The problem is solved. Contact customer support. The problem is solved.
Troubleshooting Action 293 Yes Step 1 Go to step 2. a Move the width and length guides in the tray to the correct positions for the size of the paper loaded. b Resend the print job. No The problem is solved. Is the print still skewed? Contact customer support. The problem is solved. Action Yes No Step 1 a Reinstall the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. Go to step 2. The problem is solved. Contact customer support. The problem is solved.
Troubleshooting 294 Transparency print quality is poor Action Yes No Step 1 Go to step 2. Set the paper type to Transparency. Contact customer support. The problem is solved. Yes No From the printer control panel, set the paper type in the Paper menu to match the paper loaded in the tray. Is the paper type for the tray set to Transparency? Step 2 a Check if you are using a recommended type of transparency. b Resend the print job.
Troubleshooting 295 Action Yes No Step 4 a Reinstall the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. Go to step 5. The problem is solved. Contact customer support. The problem is solved. Yes No Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. 2 Install the imaging unit, and then the cartridge. b Resend the print job.
Troubleshooting 296 Action Yes No Step 3 a Load paper from a fresh package. Go to step 4. The problem is solved. Go to step 5. The problem is solved. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Do streaked vertical lines appear on prints? Step 4 a Reinstall the imaging unit. 1 Remove the toner cartridge, and then the imaging unit.
Troubleshooting 297 Action Yes No Step 3 a Redistribute the toner in the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. Go to step 4. The problem is solved. Contact customer support. The problem is solved. Action Yes No Step 1 a Make sure your software program is using a correct fill pattern. Go to step 2. The problem is solved. Step 2 Go to step 3. a From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray.
Troubleshooting 298 Action Yes No Step 4 a Redistribute the toner in the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. Go to step 5. The problem is solved. Contact customer support. The problem is solved. Action Yes No Replace the imaging unit, and then resend the print job. Contact customer support. The problem is solved. Action Yes No Step 1 Go to step 2. The problem is solved. 2 Firmly shake the imaging unit.
Troubleshooting 299 Action Yes Step 2 The problem is solved. Contact customer support at http://support.lexmar k.com or your service representative. Replace the imaging unit, and then resend the print job. Does fog or shading appear on prints? No Toner rubs off Leading edge ABC DEF Trailing edge Action Yes No Step 1 Go to step 2. Specify the paper type and weight from the tray settings to match the paper loaded in the tray.
Troubleshooting 300 • “Scanner unit does not close” on page 300 • “Poor copy quality” on page 301 • “Partial document or photo copies” on page 302 Copier does not respond Action Yes Step 1 Clear the error or status Go to step 2. message. Check if an error or status message appears on the display. No Does an error or status message appear? Step 2 Go to step 3. Check if the power cord is plugged into the printer and a properly grounded electrical outlet.
Troubleshooting 301 Poor copy quality Action Yes Step 1 Clear the error or status Go to step 2. message. Check if an error or status message appears on the display. No Does an error or status message appear? Step 2 Go to step 3. Increase the scan resolution setting for a higher‑quality output. Go to step 4. See “Cleaning the scanner glass” on page 221. Go to step 5. See “Print quality problems” on page 281. Go to step 6.
Troubleshooting 302 Action Yes No Step 8 Go to step 9. The problem is solved. Go to step 10. The problem is solved. Contact customer support. The problem is solved. Action Yes No Step 1 Go to step 2. Place the document or photo facedown on the scanner glass in the upper left corner. Check for patterns on print. a From the Copy screen, navigate to: Advanced Options > Advanced Imaging > Sharpness > select a lower setting b On the Copy screen, make sure no scaling is being selected.
Troubleshooting 303 Action Yes No Step 2 Go to step 3. Change the paper size setting to match the paper loaded in the tray, or load the tray with paper that matches the paper size setting. Check if the paper size setting matches the size of the paper loaded in the tray. From the Paper menu on the printer control panel, check the Paper Size setting. Does the paper size setting match the size of the paper loaded in the tray. The problem is solved. Contact customer Step 3 support.
Troubleshooting 304 Caller ID is not shown Action Yes No Contact your telephone company to check if your telephone line is subscribed to the caller ID service. The problem is solved. Contact customer support. Notes: • If your region supports multiple caller ID patterns, then you may have to change the default setting. There are two settings available: FSK (pattern 1) and DTMF (pattern 2).
Troubleshooting 305 Action Yes No Step 5 a Check the telephone wall jack. 1 Plug the telephone cable into the wall jack. The problem is solved. Go to step 6. 2 Listen for a dial tone. 3 If you do not hear a dial tone, then plug a different telephone cable into the wall jack. 4 If you still do not hear a dial tone, then plug the telephone cable into a different wall jack. 5 If you hear a dial tone, then connect the printer to that wall jack. b Try sending or receiving a fax.
Troubleshooting 306 Action Yes No Step 8 The problem is solved. Go to step 9. Temporarily disconnect other equipment (such as answering machines, computers with modems, or telephone line splitters) between the printer and the telephone line, and then try sending or receiving a fax. Can you send or receive a fax? The problem is solved. Go to step 10. Step 9 a Temporarily disable call waiting. Contact your telephone company to obtain the keypad sequence for temporarily disabling call waiting.
Troubleshooting 307 Action Yes No Step 2 The problem is solved. Go to step 3. Check the ring count delay settings. a Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. b Click Settings > Fax Settings > Analog Fax Setup.
Troubleshooting 308 Action Yes Step 3 The problem is solved. Contact customer support. Set up the shortcut number properly. No • Check if the shortcut number has been set for the telephone number that you want to dial. • Dial the telephone number manually. Can you send faxes? Received fax has poor print quality Action Yes No Step 1 The problem is solved. Go to step 2. Ask the person who sent you the fax to: a Check if the quality of the original document is satisfactory.
Troubleshooting 309 Action Yes Step 3 The problem is solved. Contact customer support. Replace the toner cartridge. When Cartridge low [88.xy] appears, replace the cartridge, and then resend the fax.
Troubleshooting Action 310 Yes No Step 5 Connect the printer Go to step 6. Check if the printer is plugged into any surge protectors, uninterruptible power cord directly to a properly grounded power supplies, or extension cords. electrical outlet. Is the printer plugged into any surge protectors, uninterruptible power supplies, or extension cords? Step 6 Check other electrical equipment plugged into the outlet.
Troubleshooting 311 Action Yes No Step 5 The problem is solved. Go to step 6. From the Flash Drive menu, reduce the scan resolution settings, and then resend the scan job. Does the job scan? Step 6 The problem is solved. Change the Content Type and Content Check the scan settings. Source settings to From the Scan screen, make sure the Content Type and Content Source match the document settings are correct for the document being scanned. being scanned.
Troubleshooting 312 Poor scanned image quality Action Yes No Step 1 Clear the error message. Go to step 2. Go to step 3. Increase the scan resolution settings for a higher‑quality output. Go to step 4. See “Cleaning the scanner glass” on page 221. Go to step 5. Place the document or photo facedown on the scanner glass in the upper left corner. Go to step 6. See “Print quality problems” on page 281. Problem solved. Go to step 7. Contact customer support.
Troubleshooting 313 Partial document or photo scans Action Yes Check the placement of the document or photo. Contact customer Make sure the document or photo is loaded facedown on the scanner support. glass in the upper left corner. No Load the document or photo facedown on the scanner glass in the upper left corner. Is the document or photo loaded correctly? Cannot scan from a computer Action Yes No Step 1 Go to step 3. Go to step 2. Clear the error message. Go to step 3.
Troubleshooting 314 Solving home screen applications problems An application error has occurred Action Yes No Step 1 Go to step 2. Contact customer support. Check the system log for relevant details. a Open a Web browser, and then type the printer IP address in the address field. If you do not know the IP address of the printer, then you can: • View the IP address on the printer home screen.
Troubleshooting 315 Action Yes No Step 3 Go to step 4. Contact your system support person. Go to step 5. Tighten the cable connection. Go to step 6. Contact your system support person. Check if the network connection is working. Is the network connection working? Step 4 Make sure the cable connections to the printer and print server are secure. For more information, see the setup documentation that came with the printer.
Notices 316 Notices Product information Product name: Lexmark MX610de, MX611de, and MX611dhe Machine type: 7016 Model(s): 630, 670, 675 Edition notice May 2013 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Notices 317 Trademarks Lexmark, Lexmark with diamond design, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products.
Notices 318 Note: Some modes may not apply to your product. 1-meter average sound pressure, dBA Printing 55 dBA Scanning 45 dBA Copying 56 dBA Ready N/A dBA Values are subject to change. See www.lexmark.com for current values. Temperature information Ambient operating temperature 15.6 to 32.2°C (60 to 90°F) Shipping temperature -40 to 43.
Notices 319 Static sensitivity notice This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer. ENERGY STAR Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark. Laser notice The printer is certified in the U.S.
Notices 320 DANGER - Invisible laser radiation when cartridges are removed and interlock defeated. Avoid exposure to laser beam. PERIGO - Radiação a laser invisível será liberada se os cartuchos forem removidos e o lacre rompido. Evite a exposição aos feixes de laser. Opasnost - Nevidljivo lasersko zračenje kada su kasete uklonjene i poništena sigurnosna veza. Izbjegavati izlaganje zracima. NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, ze zařízení je vysíláno neviditelné laserové záření.
Notices 321 Sleep Mode This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout. Factory default Sleep Mode Timeout for this product (in minutes): 30 minutes By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 180 minutes.
Notices 322 Licensing notices All licensing notices associated with this product can be viewed from the root directory of the installation software CD.
Notices 323 The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact your local telephone company.
Notices 324 recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter’s Laboratories), another NRTL (Nationally Recognized Testing Laboratory), or a recognized safety certification body in the country/region of use. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.
Notices 325 Japanese telecom notice The installed optional modem is in compliance with Japanese Telecommunication Law and has been Certified by JATE, with Certification Number A11-0160001. Lexmark International, Inc. LEX-M03-002 A11-0160001JP Using this product in Switzerland This product requires a Swiss billing tone filter (Lexmark part number 80D1877) to be installed on any line which receives metering pulses in Switzerland.
Notices 326 Compliance is indicated by the CE marking. The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
Notices 327 To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.
Notices 328 Compliance is indicated by the CE marking. The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
Notices 329 Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele. Suomi Lexmark International, Inc.
Notices 330 The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Suite B Profile for Transport Layer Security (TLS) implemented in the product or service. The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp.
Notices 331 Limited warranty service The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed.
Notices 332 MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE. Limitation of liability Your sole remedy under this limited warranty is set forth in this document.
Index 333 Index Numerics 250‑sheet tray installing 44 550‑sheet tray installing 44 Symbols [x]-page jam, remove all pages from the output bin. Leave paper in bin. [45y.xx] 247 [x]‑page jam, clear manual feeder. [25y.xx] 244 [x]‑page jam, clear standard bin. [20y.xx] 238 [x]‑page jam, open automatic feeder top cover. [28y.xx] 238 [x]‑page jam, open front door. [20y.xx] 240 [x]‑page jam, open rear door. [20y.xx] 239 [x]‑page jam, open tray [x]. [24y.xx] 245 [x]‑page jam, remove tray 1 to clear duplex.
Index supply notifications, maintenance kit 233 supply notifications, toner cartridge 233 configuring e‑mail settings 100 configuring port settings 55 configuring supply notifications 233 connecting printer to distinctive ring service 120 connecting to a wireless network using PIN (Personal Identification Number) method 53 using Push Button Configuration method 53 using the Embedded Web Server 54 using wireless setup wizard 53 conservation settings brightness, adjusting 214 conserving supplies 210 Eco‑Mode
Index E Eco‑Mode setting 211 Edit Security Setups menu 158 Embedded Web Server accessing 13, 21 administrator settings 232 checking the status of parts 222 checking the status of supplies 222 creating a fax destination shortcut 124 creating an FTP shortcut 130 creating e‑mail shortcuts 101 functions 13 initial fax setup 108 modifying confidential print settings 86 networking settings 232 problem accessing 314 scanning to a computer using 132 setting up e‑mail alerts 232 using 13 Embedded Web Server — Secur
Index Fax Station Number not set up. Contact system administrator.
Index Internal Solutions Port changing port settings 55 installing 33 troubleshooting 272 IP address of computer finding 20 IP address, printer finding 21 IPv6 menu 153 J jams accessing 236 avoiding 235 understanding messages 236 jams, clearing finisher bin 247 in automatic document feeder top cover 238 in duplex area 243 in front door 240 in manual feeder 244 in rear door 239 in standard bin 238 in staple access door 247 in tray [x] 245 Job Accounting menu 202 L labels, paper tips 74 letterhead copying
Index Network Reports menu 151 network settings Embedded Web Server 232 network setup page printing 58 Networking Guide where to find 232 No analog phone line connected to modem, fax is disabled. 262 noise emission levels 317 Non‑Lexmark [supply type], see User’s Guide [33.
Index toner fog or background shading 298 toner rubs off 299 toner specks appear on prints 298 transparency print quality is poor 294 uneven print density 299 white streaks 297 print troubleshooting error reading flash drive 275 held jobs do not print 277 incorrect characters print 279 incorrect margins on prints 286 jammed pages are not reprinted 274 job prints from wrong tray 279 job prints on wrong paper 279 jobs do not print 275 Large jobs do not collate 280 multiple‑language PDF files do not print 274
Index Load [paper source] with [paper type] [paper size] [paper orientation] 260 Load Manual Feeder with [custom string] [paper orientation] 260 Load Manual Feeder with [custom type name] [paper orientation] 260 Load Manual Feeder with [paper size] [paper orientation] 260 Load manual feeder with [paper type] [paper size] [paper orientation] 260 Maintenance kit low [80.xy] 261 Maintenance kit nearly low [80.xy] 261 Maintenance kit very low, [x] estimated pages remain [80.
Index Reinstall missing or unresponsive imaging unit [31.xy] 264 Remote Operator Panel setting up 26 Remove defective disk [61] 263 Remove paper from standard output bin 263 removing printer hard disk 43 repeat print jobs 85 printing from a Macintosh computer 86 printing from Windows 86 repeating print defects appear on prints 289 Replace all originals if restarting job. 264 Replace cartridge, 0 estimated pages remain [88.xy] 263 Replace defective imaging unit [31.
Index sending fax using the address book 123 Serial port [x] disabled [56] 265 serial printing setting up 56 Set Date/Time menu 162 setting TCP/IP address 152 setting Hibernate Timeout 213 setting the fax number 120 setting the outgoing fax name 120 setting the paper size 59 setting the paper type 59 setting the Universal paper size 59 setting up e‑mail alerts 232 setting up fax country‑ or region‑specific 116 digital telephone service 115 DSL connection 113 standard telephone line connection 109 VoIP conn
Index troubleshooting, display printer display is blank 270 troubleshooting, fax caller ID is not shown 304 can receive but not send faxes 307 can send but not receive faxes 306 cannot send or receive a fax 304 received fax has poor print quality 308 troubleshooting, paper feed message remains after jam is cleared 274 troubleshooting, print error reading flash drive 275 held jobs do not print 277 incorrect characters print 279 incorrect margins on prints 286 jammed pages are not reprinted 274 job prints fr
Index X XPS menu 204 344
