User Guide

Use To
Timeouts
Print Timeout
Disabled
1–255
Set the amount of time in seconds the scanner waits to receive an
end‑of‑job message before canceling the rest of the print job.
Notes:
• 90 is the factory default setting.
• When the timer expires, any partially printed page still in the
printer is printed, and then the printer checks to see if any
new print jobs are waiting.
• Print Timeout is available only when using PCL emulation.
This setting has no effect on PostScript emulation print jobs.
Timeouts
Wait Timeout
Disabled
15–65535
Set the amount of time in seconds the scanner waits for additional
data before canceling a print job.
Notes:
• 40 is the factory default setting.
• Wait Timeout is available only when the scanner is using
PostScript emulation. This setting has no effect on PCL
emulation print jobs.
Timeouts
Job Hold Timeout
5–255
Set the amount of time the scanner waits for user intervention
before it holds jobs that require unavailable resources and
continues to print other jobs in the print queue.
Notes:
• 30 is the factory default setting.
• This menu appears only when a hard disk is installed.
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Set the scanner and the printer to restart when an error occurs.
Note: “Reboot always” is the factory default setting.
Error Recovery
Max Auto Reboots
1‑20
Determine the number of automatic reboots the printer can
perform.
Notes:
• 2 is the factory default setting.
• If the printer reaches the maximum number of reboots
within a certain amount of time, the printer does not
continue to reboot, and the error message appears on the
display.
Print Recovery
Auto Continue
Disabled
5–255
Let the printer automatically continue printing from certain offline
situations when these are not resolved within the specified time
period.
Note: Disabled is the factory default setting.
Understanding the printer menus 189