User Guide

Configuration change, some held
jobs were not restored [57] 291
Defective flash detected [51] 291
Disk full 62 291
Disk full, scan job canceled 291
Disk must be formatted for use in
this device 292
Disk near full. Securely clearing
disk space. 292
Empty the hole punch box 292
Error reading USB drive. Remove
USB. 292
Error reading USB hub. Remove
hub. 292
Fax memory full 292
Fax partition inoperative. Contact
system administrator. 292
Fax server 'To Format' not set up.
Contact system
administrator. 292
Fax Station Name not set up.
Contact system
administrator. 293
Fax Station Number not set up.
Contact system
administrator. 293
Imaging unit low [84.xy] 293
Imaging unit nearly low
[84.xy] 293
Imaging unit very low, [x]
estimated pages remain
[84.xy] 293
Incompatible output bin [x]
[59] 293
Incompatible tray [x] [59] 293
Incorrect paper size, open [paper
source] [34] 294
Insert hole punch box 294
Insert staple cartridge 294
Insert Tray [x] 294
Install bin [x] 294
Install Tray [x] 295
Insufficient memory for Flash
Memory Defragment operation
[37] 295
Insufficient memory to collate job
[37] 295
Insufficient memory to support
Resource Save feature [35] 295
Insufficient memory, some Held
Jobs were deleted [37] 295
Insufficient memory, some held
jobs will not be restored
[37] 295
Load [paper source] with [custom
string] [paper orientation] 296
Load [paper source] with [custom
type name] [paper
orientation] 296
Load [paper source] with [paper
size] [paper orientation] 296
Load [paper source] with [paper
type] [paper size] [paper
orientation] 296
Load Manual Feeder with [custom
string] [paper orientation] 297
Load Manual Feeder with [custom
type name] [paper
orientation] 297
Load Manual Feeder with [paper
size] [paper orientation] 297
Load manual feeder with [paper
type] [paper size] [paper
orientation] 297
Load staples 297
Maintenance kit low [80.xy] 298
Maintenance kit nearly low
[80.xy] 298
Maintenance kit very low, [x]
estimated pages remain
[80.xy] 298
Memory full [38] 298
Memory full, cannot send
faxes 298
Network [x] software error
[54] 298
No analog phone line connected
to modem, fax is disabled. 298
Non‑Lexmark [supply type], see
User’s Guide [33.xy] 299
Not enough free space in flash
memory for resources [52] 299
Paper changes needed 299
Parallel port [x] disabled [56] 299
Printer had to restart. Last job
may be incomplete. 300
Reattach bin [x] 300
Reattach bins [x] – [y] 300
Reinstall missing or unresponsive
cartridge [31.xy] 301
Reinstall missing or unresponsive
imaging unit [31.xy] 301
Remove defective disk [61] 301
Remove packaging material, [area
name] 301
Remove paper from [linked set bin
name] 302
Remove paper from all bins 301
Remove paper from bin [x] 302
Remove paper from standard
output bin 302
Replace all originals if restarting
job. 302
Replace cartridge, 0 estimated
pages remain [88.xy] 302
Replace cartridge, printer region
mismatch [42.xy] 302
Replace imaging unit, 0 estimated
pages remain [84.xy] 303
Replace jammed originals if
restarting job. 303
Replace last scanned page and
jammed originals if restarting
job. 303
Replace maintenance kit, 0
estimated pages remain
[80.xy] 303
Replace missing fuser [31.xy] 304
Replace missing or unresponsive
fuser [31.xy] 301
Replace roller kit [81.xy] 304
Replace separator pad 304
Replace unsupported cartridge
[32.xy] 304
Replace unsupported fuser
[32.xy] 304
Replace unsupported imaging unit
[32.xy] 304
Replace wiper 304
Restore held jobs? 305
Scan document too long 305
Scanner automatic feeder cover
open 305
Scanner disabled by admin
[840.01] 305
Scanner disabled. Contact system
administrator if problem persists.
[840.02] 305
Scanner jam, remove all originals
from the scanner [2yy.xx] 305
Scanner jam, remove jammed
originals from the scanner
[2yy.xx] 305
Scanner locked, release lock under
scanner 306
Index 384