MX710 Series User's Guide August 2014 Machine type(s): 7463 Model(s): 032, 036, 037, 232, 236, 237 www.lexmark.
Contents 2 Contents Safety information.......................................................................................7 Learning about the printer...........................................................................9 Finding information about the printer......................................................................................................9 Selecting a location for the printer.......................................................................................................
Contents 3 Configuring Universal paper settings......................................................................................................59 Loading the 250‑ or 550‑sheet tray........................................................................................................59 Loading the 2100‑sheet tray...................................................................................................................66 Loading the multipurpose feeder.........................................
Contents 4 Sending a fax.........................................................................................................................................128 Creating shortcuts.................................................................................................................................130 Customizing fax settings........................................................................................................................131 Canceling an outgoing fax.....................
Contents 5 Ordering parts and supplies..................................................................................................................240 Storing supplies.....................................................................................................................................243 Replacing supplies.................................................................................................................................243 Moving the printer................................
Contents 6 Notices.....................................................................................................336 Index........................................................................................................
Safety information 7 Safety information Connect the power cord directly to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible. CAUTION—POTENTIAL INJURY: Do not use this product with extension cords, multioutlet power strips, multioutlet extenders, or other types of surge or UPS devices.
Safety information 8 This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts. CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress.
Learning about the printer 9 Learning about the printer Finding information about the printer What are you looking for? Find it here Initial setup instructions: Setup documentation—The setup documentation came with the printer and is also available at http://support.lexmark.com.
Learning about the printer 10 What are you looking for? Find it here The latest supplemental information, updates, and customer support: Lexmark support Web site— http://support.lexmark.com • • • • • Documentation Note: Select your country or region, and then select your product to view the appropriate support site.
Learning about the printer 1 Right side 152 mm (6 in.) 2 Front 394 mm (15.5 in.) 3 Left side 152 mm (6 in.) 4 Rear 152 mm (6 in.) 5 Top 152 mm (6 in.) 11 Printer configurations CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using multiple input options. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, then you may need additional furniture.
Learning about the printer 12 Basic model 1 2 3 4 5 6 7 1 Automatic document feeder (ADF) 2 ADF tray 3 ADF bin 4 Standard bin 5 Printer control panel 6 100‑sheet multipurpose feeder 7 Standard 550‑sheet tray
Learning about the printer 13 Fully configured model The following illustration shows the maximum number of optional trays that are supported by the printer. For more information on other configurations, visit www.lexmark.com/multifunctionprinters. 1 Optional 550‑sheet tray 2 Optional 250‑sheet trays 3 Caster base 4 Optional 2100‑sheet tray When using optional trays: • Always use a caster base when the printer is configured with an optional 2100‑sheet tray.
Learning about the printer 14 Using the ADF and scanner glass Scanner glass A B C Automatic document feeder (ADF) Use the ADF for multiple‑page documents including two- Use the scanner glass for single‑page documents, book pages, sided (duplex) pages. small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). You can use the ADF or the scanner glass to scan documents.
Understanding the printer control panel 15 Understanding the printer control panel Using the printer control panel 1 3 2 9 1 @!. 4 7 GHI 3 DEF 2 ABC 5 8 TUV * 0 4 6 MNO JKL PQRS 9 WXYZ # C 5 8 Use the 7 6 To 1 Display 2 Home button Go to the home screen. 3 Sleep button Enable Sleep mode or Hibernate mode. • View the printer status and messages. • Set up and operate the printer.
Understanding the printer control panel 16 Indicator light Printer status Off The printer is off or in Hibernate mode. Blinking green The printer is warming up, processing data, or printing. Solid green The printer is on, but idle. Blinking red The printer requires user intervention. Sleep button light Printer status Off The printer is off, idle, or in Ready state. Solid amber The printer is in Sleep mode. Blinking amber The printer is entering or waking from Hibernate mode.
Understanding the printer control panel Touch 17 To 7 Forms and Favorites Quickly find and print frequently used online forms. 8 Menu icon Access the printer menus. Note: The menus are available only when the printer is in Ready state. 9 Bookmarks Create, organize, and save a set of bookmarks (URL) into a tree view of folders and file links. Note: The tree view supports only bookmarks created from this function, and not from any other application.
Understanding the printer control panel Feature 18 Description Status message bar • Show the current printer status such as Ready or Busy. • Show printer conditions such as Toner Low or Cartridge Low. • Show intervention messages so the printer can continue processing. Printer IP address The IP address of your network printer is located at the upper left corner of the home screen and appears as four sets of numbers separated by periods.
Understanding the printer control panel Other touch-screen buttons Touch To Accept Save a setting. Cancel Reset • Cancel an action or a selection. • Exit a screen and return to the previous screen without saving changes. Reset values on the screen.
Setting up and using the home screen applications 20 Setting up and using the home screen applications Notes: • Your home screen may vary depending on your home screen customization settings, administrative setup, and active embedded applications. • There may be additional solutions and applications available for purchase. For more information, go to www.lexmark.com or contact the place where you purchased the printer.
Setting up and using the home screen applications 21 3 Press Enter. Note: If you are using a proxy server, then temporarily disable it to load the Web page correctly. Customizing the home screen 1 Open a Web browser, and then type the printer IP address in the address field. Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Setting up and using the home screen applications 22 Activating the home screen applications Finding information about the home screen applications Your printer comes with preinstalled home screen applications. Before you can use these applications, you must first activate and set up these applications using the Embedded Web Server. For more information on accessing the Embedded Web Server, see “Accessing the Embedded Web Server” on page 20.
Setting up and using the home screen applications 23 Setting up Card Copy Note: A later version of this User's Guide may contain a direct link to the Administrator's Guide of this application. To check for updates of this User's Guide, go to http://support.lexmark.com. Use To Quickly and easily copy insurance, identification, and other wallet‑size cards. You can scan and print both sides of a card on a single page, saving paper and showing the information on the card in a more convenient manner.
Setting up and using the home screen applications Use 24 To Create shortcuts on the printer home screen, with settings for up to 25 frequently used copy, fax, or email jobs. To use the application, touch MyShortcut, and then follow the instructions on the printer display. Setting up Multi Send Note: A later version of this User's Guide may contain a direct link to the Administrator's Guide of this application. To check for updates of this User's Guide, go to http://support.lexmark.com.
Setting up and using the home screen applications Use 25 To Scan a document and send it to a shared network folder. You can define up to 30 unique folder destinations. Notes: • The printer must have permission to write to the destinations. From the computer where the destination is specified, use sharing, security, and firewall settings to allow the printer at least a write access. For help, see the documentation that came with your operating system.
Setting up and using the home screen applications 26 Exporting and importing a configuration You can export configuration settings into a text file, and then import the file to apply the settings to other printers. 1 Open a Web browser, and then type the printer IP address in the address field. Note: View the IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Additional printer setup Additional printer setup Installing internal options CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Additional printer setup CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. 1 Open the controller board access cover.
Additional printer setup 29 3 Remove the shield. 1 2 4 Use the following illustration to locate the appropriate connector. Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board electronic components or connectors.
Additional printer setup 30 5 Reattach the shield, and then align the screws with the holes. 1 6 Tighten the screws on the shield.
Additional printer setup 7 Close the access cover. Installing a memory card CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Additional printer setup 32 3 Align the notch (1) on the memory card with the ridge (2) on the connector. 1 2 4 Push the memory card straight into the connector, and then push the card toward the controller board wall until it clicks into place. 5 Reattach the controller board shield, and then the controller board access cover.
Additional printer setup 33 Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board electronic components or connectors. 1 Access the controller board. For more information, see “Accessing the controller board” on page 27. 2 Unpack the optional card. Warning—Potential Damage: Avoid touching the connection points along the edge of the card.
Additional printer setup 34 Warning—Potential Damage: Improper installation of the card may cause damage to the card and the controller board. Note: The entire length of the connector on the card must touch and be flush against the controller board. 5 Close the controller board access door. Note: When the printer software and any hardware options are installed, it may be necessary to manually add the options in the printer driver to make them available for print jobs.
Additional printer setup 35 1 ISP solution 2 Screw for attaching the plastic bracket to the ISP 3 Screws for attaching the ISP mounting bracket to the controller board shield 4 Plastic bracket 4 Remove the metal cover from the ISP opening. a Loosen the screw. b Lift the metal cover, and then pull it out completely.
Additional printer setup 36 5 Align the posts of the plastic bracket to the holes on the controller board cage, and then press the plastic bracket on the controller board cage until it clicks into place. Note: Make sure that the plastic bracket has latched completely, and that the plastic bracket is seated firmly on the cage. 6 Install the ISP on the plastic bracket. Note: Hold the ISP at an angle over the plastic bracket so that any overhanging connectors will pass through the ISP opening in the cage.
Additional printer setup 7 Lower the ISP toward the plastic bracket until the ISP is seated between the guides of the plastic bracket. 8 Use the provided thumbscrew for the ISP to attach the plastic bracket to the ISP. Note: Turn the screw clockwise, enough to hold the ISP in place, but do not tighten it yet.
Additional printer setup 9 Attach the two provided screws to secure the ISP mounting bracket to the controller board shield. 10 Tighten the thumbscrew that is attached to the ISP. Warning—Potential Damage: Do not screw it on too tightly.
Additional printer setup 11 Connect the ISP solution interface cable into the receptacle of the controller board. Note: The plugs and receptacles are color-coded. Installing a printer hard disk Note: This task requires a flat‑head screwdriver. CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing.
Additional printer setup 3 Locate the appropriate connector on the controller board cage. Note: If an optional ISP is currently installed, then the printer hard disk must be installed onto the ISP.
Additional printer setup 41 To install a printer hard disk onto the ISP: a Remove the screws attached to the printer hard disk mounting bracket, and then remove the bracket. b Align the standoffs of the printer hard disk to the holes in the ISP, and then press the printer hard disk down until the standoffs are in place. Installation warning: Hold only the edges of the printed circuit board assembly. Do not touch or press on the center of the printer hard disk. Doing so may cause damage.
Additional printer setup 42 To install a printer hard disk directly on the controller board cage: a Align the standoffs of the printer hard disk to the holes in the controller board cage, and then press the printer hard disk down until the standoffs are in place. Installation warning: Hold only the edges of the printed circuit board assembly. Do not touch or press on the center of the printer hard disk. Doing so may cause damage.
Additional printer setup b Use the two provided screws to attach the printer hard disk mounting bracket. c Insert the plug of the printer hard disk interface cable into the receptacle of the controller board. Note: The plugs and receptacles are color‑coded.
Additional printer setup Removing a printer hard disk Note: This task requires a flat‑head screwdriver. CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Additional printer setup 45 Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board electronic components or connectors. 1 Access the controller board. For more information, see “Accessing the controller board” on page 27. 2 Unplug the printer hard disk interface cable from the controller board, leaving the cable attached to the printer hard disk.
Additional printer setup 3 Remove the screws holding the printer hard disk in place. 4 Remove the printer hard disk. 5 Set aside the printer hard disk.
Additional printer setup 47 Installing hardware options Order of installation CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing.
Additional printer setup 48 1 2 2 Unpack the optional tray, and then remove all packing material. 3 Pull out the tray completely from the base. 4 Remove any packing material from inside the tray. 5 Insert the tray into the base. 6 Place the tray near the printer. 7 Lock the wheels of the caster base to secure the printer, then align the printer with the tray, and then slowly lower the printer into place. Note: Optional trays lock together when stacked.
Additional printer setup 49 8 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.
Additional printer setup 2 50 1 Note: When the printer software and any optional trays are installed, you may need to manually add the options in the printer driver to make them available for print jobs. For more information, see “Adding available options in the print driver” on page 52. To uninstall the optional trays, slide the latch on the right side of the printer toward the front of the printer until it clicks into place, and then remove stacked trays one at a time from the top to the bottom.
Additional printer setup 51 7 6 5 4 3 1 Use the To EXT port Connect additional devices (telephone or answering machine) to the printer and the telephone line. Use this port if you do not have a dedicated fax line for the printer and if this connection method is supported in your country or region. Note: Remove the plug to access the port.
Additional printer setup Organizing cables Attach the Ethernet cable and power cord, and then neatly tuck the cables in the channels at the back of the printer. Setting up the printer software Installing the printer 1 Obtain a copy of the software installer package. 2 Run the installer, and then follow the instructions on the computer screen. 3 For Macintosh users, add the printer. Note: Obtain the printer IP address from the TCP/IP section in the Network/Ports menu.
Additional printer setup 53 In Windows 8 From the Search charm, type run, and then navigate to: Run > type control printers > OK In Windows 7 or earlier a Click , or click Start and then click Run. b Type control printers. c Press Enter, or click OK. 2 Select the printer you want to update, and then do either of the following: • For Windows 7 or later, select Printer properties. • For earlier versions, select Properties. 3 Navigate to the Configuration tab, and then select Update Now ‑ Ask Printer.
Additional printer setup 54 You will need an Ethernet cable to connect the printer to the network and an available port where the printer can physically connect to the network. Use a new network cable when possible to avoid potential problems caused by a damaged cable. Preparing to set up the printer on a wireless network Notes: • Make sure your wireless network adapter is installed in your printer and working properly.
Additional printer setup 55 Connecting the printer using the Wireless Setup Wizard Before you begin, make sure that: • A wireless network adapter is installed in the printer and is working properly. For more information, see the instruction sheet that came with the wireless network adapter. • An Ethernet cable is disconnected from the printer. • Active NIC is set to Auto.
Additional printer setup 56 3 Open a Web browser, and then type the IP address of your access point in the address field. Notes: • The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 4 Access the WPS settings. For more information, see the documentation that came with your access point. 5 Enter the eight‑digit PIN, and then save the setting.
Additional printer setup 57 3 Configure the port from the list. 4 Update the IP address. 5 Apply the changes. For Macintosh users 1 From System Preferences in the Apple menu, navigate to the list of printers, and then select + > IP. 2 Type the IP address in the address field. 3 Apply the changes. Setting up serial printing (Windows only) After installing the serial or communication (COM) port, configure the printer and the computer. Note: Serial printing reduces print speed.
Additional printer setup 58 Printing a network setup page If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration. 1 From the home screen, navigate to: > Reports > Network Setup Page 2 Check the first section of the network setup page, and confirm that the status is Connected.
Loading paper and specialty media 59 Loading paper and specialty media The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 254 and “Storing paper” on page 84.
Loading paper and specialty media 60 2 Squeeze and slide the width guide to the correct position for the size of the paper being loaded until it clicks into place. Note: Use the paper size indicators at the bottom of the tray to help position the guides.
Loading paper and specialty media 61 3 Unlock the length guide, and then squeeze and slide the guide to the correct position for the size of the paper being loaded. Notes: • Lock the length guide for all paper sizes. • Use the paper size indicators at the bottom of the tray to help position the guides.
Loading paper and specialty media 62 4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 5 Load the paper stack with the printable side facedown for one‑sided printing. Note: Make sure the paper or envelope is loaded properly.
Loading paper and specialty media 63 • Do not slide the paper into the tray. Load paper as shown in the illustration. • If you are loading envelopes, then make sure that the flap side is facing up and the envelopes are on the left side of the tray.
Loading paper and specialty media • Make sure the paper is below the solid line, which is the maximum paper fill indicator. Warning—Potential Damage: Overfilling the tray can cause paper jams.
Loading paper and specialty media 65 • When using card stock, labels, or other types of specialty media, make sure the paper is below the dashed line, which is the alternate paper fill indicator. 6 For custom‑ or Universal‑size paper, adjust the paper guides to lightly touch the sides of the stack, and then lock the length guide.
Loading paper and specialty media 66 7 Insert the tray. 8 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray. Note: Set the correct paper size and type to avoid paper jams and print quality problems. Loading the 2100‑sheet tray CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed. 1 Pull out the tray completely.
Loading paper and specialty media 67 Loading A5‑size paper a Pull up and slide the width guide to the position for A5. 2 1 A5 A5 A4 LGL OFC FOLIO LTR A5 A4 LGL C OF LIO FO R LT A4 LGL C OF LIO FO R LT b Squeeze, and then slide the length guide to the position for A5 until it clicks into place.
Loading paper and specialty media 68 c Remove the A5 length guide from its holder. 1 2 d Insert the A5 length guide into its designated slot. Note: Press the A5 length guide until it clicks into place. Loading A4‑, letter‑, legal‑, oficio‑, and folio‑size paper a Pull up and slide the width guide to the correct position for the size of paper you are loading.
Loading paper and specialty media 69 b If the A5 length guide is still attached to the length guide, then remove it from its place. If the A5 length guide is not attached, then proceed to step d. c Put the A5 length guide in its holder.
Loading paper and specialty media 70 A5 A4 LGL OFC FOLIO LTR d Squeeze, and then slide the length guide to the correct position for the paper size you are loading. 3 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 4 Load the paper stack with the printable side facedown for one‑sided printing. • Make sure the paper is loaded properly.
Loading paper and specialty media 71 One‑sided printing Two‑sided (duplex) printing C AB C AB • Make sure the paper is below the maximum paper fill indicator. Warning—Potential Damage: Overfilling the tray can cause paper jams. 5 Insert the tray. Note: Press the paper stack down while inserting the tray.
Loading paper and specialty media 72 LGLOFC FOLIO LTR A4 A5 6 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray. Note: Set the correct paper size and type to avoid paper jams and print quality problems. Loading the multipurpose feeder 1 Pull down the multipurpose feeder door. Note: Do not load or close the multipurpose feeder while a job is printing.
Loading paper and specialty media 2 Pull the multipurpose feeder extender. Note: Guide the extender gently so that the multipurpose feeder is fully extended and open. 3 Slide the width guide to the correct position for the size of the paper you are loading. Note: Use the paper size indicators on the bottom of the tray to help position the guides.
Loading paper and specialty media 74 4 Prepare the paper or specialty media for loading. • Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. • Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface. Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them. • Flex the stack of envelopes back and forth to loosen them, and then fan them.
Loading paper and specialty media 75 • Load only one size and type of paper or specialty media at a time. • Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled. One‑sided (simplex) printing Two‑sided (duplex) printing C AB • Load envelopes with the flap side down and on the left of the multipurpose feeder. Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives.
Loading paper and specialty media 76 6 For custom- or Universal- size paper, adjust the width guides to lightly touch the sides of the stack. 7 From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray. Note: Set the correct paper size and type to avoid paper jams and print quality problems. Linking and unlinking trays The printer links trays when the specified paper size and type are the same.
Loading paper and specialty media Note: You can also change the paper size and type settings using the printer control panel. For more information, see “Setting the paper size and type” on page 59. Warning—Potential Damage: Paper loaded in the tray should match the paper type name assigned in the printer. The temperature of the fuser varies according to the specified paper type. Printing issues may occur if settings are not properly configured.
Loading paper and specialty media 3 Select a custom paper type name, and then select a paper type. Note: Paper is the factory default paper type for all user‑defined custom names. 4 Click Submit. Using the printer control panel 1 From the home screen, navigate to: > Paper Menu > Custom Types 2 Select a custom paper type name, and then select a paper type. Note: Paper is the factory default paper type for all user‑defined custom names. 3 Touch Submit.
Paper and specialty media guide 79 Paper and specialty media guide Notes: • • • • Make sure that the paper size, type, and weight are set correctly on the computer or on the control panel. Flex, fan, and straighten specialty media before loading them. The printer may print at a reduced speed to prevent damage to the fuser. For more information on card stock and labels, see the Card Stock & Label Guide on the Lexmark support Web site at http://support.lexmark.com.
Paper and specialty media guide 80 – Have bent corners. – Have rough, cockle, or laid finishes. • Adjust the width guides to fit the width of the envelopes. • Before loading the envelopes on the tray, flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level surface. Note: A combination of high humidity (over 60%) and high printing temperature may wrinkle or seal envelopes.
Paper and specialty media guide 81 Tips on using transparencies • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the transparencies loaded in the tray. • • • • • Print a test page on the transparencies being considered for use before buying large quantities. Use transparencies designed specifically for laser printers. Avoid getting fingerprints on the transparencies to prevent print quality problems.
Paper and specialty media guide 82 Grain direction Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the paper, or grain short, running the width of the paper. For 60–176 g/m2 (16–47‑lb) paper, grain long paper is recommended. Fiber content Most high‑quality xerographic paper is made from 100% chemically treated pulped wood.
Paper and specialty media guide • • • • 83 Thickness (impacts how much can be loaded into a tray) Surface roughness (measured in Sheffield units, impacts print clarity and how well toner fuses to the paper) Surface friction (determines how easily sheets can be separated) Grain and formation (impacts curling, which also influences the mechanics of how the paper behaves as it moves through the printer) • Brightness and texture (look and feel) Recycled papers are better than ever; however, the amount of re
Paper and specialty media guide 84 For more information about Lexmark, visit www.lexmark.com. General sustainability-related information can be found at the Environmental Sustainability link. Storing paper Use these paper storage guidelines to help avoid jams and uneven print quality: • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent.
Paper and specialty media guide 85 Paper size1 Dimensions Letter 216 x 279 mm (8.5 x 11 in.) Legal 216 x 356 mm (8.5 x 14 in.) Executive 184 x 267 mm (7.3 x 10.5 in.) Oficio (México) 216 x 340 mm (8.5 x 13.4 in.) Folio 216 x 330 mm (8.5 x 13 in.) Statement 140 x 216 mm (5.5 x 8.5 in.) X Universal 105 x 148 mm to 216 x 356 mm (4.13 x 5.83 in. to 8.5 x 14 in.) X 70 x 127 mm to 216 x 356 mm (2.76 x 5 in. to 8.5 x 14 in.
Paper and specialty media guide Paper size1 Dimensions Other Envelope 98 x 162 mm (3.9 x 6.4 in.) to 176 x 250 mm (6.9 x 9.8 in.) 86 Standard or optional 250‑ or 550‑sheet tray 2100‑sheet tray Multipurpose feeder Duplex X ADF X Scanner glass X 1 If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that correspond to the position of the length guide in the tray from the Paper Size/Type menu.
Printing 87 Printing Printing forms and a document Printing forms Use Forms and Favorites to quickly and easily access frequently used forms or other information that is regularly printed. Before you can use this application, first set it up on the printer. For more information, see “Setting up Forms and Favorites” on page 22. 1 From the home screen, navigate to: Forms and Favorites > select the form from the list > enter the number of copies > adjust other settings 2 Apply the changes.
Printing 88 Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Print Settings > Quality Menu > Toner Darkness. 3 Adjust the toner darkness, and then click Submit.
Printing 89 • If you insert the flash drive when the printer requires attention, such as when a jam has occurred, then the printer ignores the flash drive. • If you insert the flash drive while the printer is processing other print jobs, then Busy appears on the printer display. After these print jobs are processed, you may need to view the held jobs list to print documents from the flash drive.
Printing 90 Recommended flash drives File type • Lexar JumpDrive FireFly (512MB and 1GB) • SanDisk Cruzer Micro (512MB and 1GB) • Sony Micro Vault Classic (512MB and 1GB) Documents: • .pdf • .xps Images: • • • • • • • • .dcx .gif .jpeg or .jpg .bmp .pcx .tiff or .tif .png .fls Printing from a mobile device To download a compatible mobile printing application, visit www.lexmark.com/mobile. Note: Mobile printing applications may also be available from your mobile device manufacturer.
Printing 91 Use To Notes: • Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs. • You can set the printer to store print jobs in the printer memory until you start the print job from the printer control panel. • All print jobs that can be initiated by the user at the printer are called held jobs. 2 Touch Submit.
Printing 92 Modifying confidential print settings 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Security > Confidential Print Setup.
Printing Canceling a print job from the computer For Windows users 1 Open the printers folder, and then select your printer. 2 From the print queue, select the print job you want to cancel, and then delete it. For Macintosh users 1 From System Preferences in the Apple menu, navigate to your printer. 2 From the print queue, select the print job you want to cancel, and then delete it.
Copying 94 Copying Scanner glass A B C Automatic document feeder (ADF) Use the ADF for multiple‑page documents including two-sided pages. Use the scanner glass for single-page documents, book pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). Making copies Making a quick copy 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Copying 95 • The ADF indicator light comes on when the paper is loaded properly. 2 Adjust the paper guides. 3 From the home screen, navigate to: Copy > specify the copy settings > Copy It Copying using the scanner glass 1 Place an original document facedown on the scanner glass in the upper left corner. 2 From the home screen, navigate to: Copy > specify the copy settings > Copy It If you have more pages to scan, then place the next document on the scanner glass, and then touch Scan the next page.
Copying 96 3 Navigate to: Copy to > select the tray that contains transparencies > Copy It If there are no trays that contain transparencies, then navigate to: Manual Feeder > > select the size of the transparencies > > Transparency > 4 Load transparencies into the multipurpose feeder, and then touch Copy It. Copying on letterhead 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Copying 97 Customizing copy settings Copying to a different size 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides.
Copying 98 Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides.
Copying 99 3 From the home screen, navigate to: Copy > Sides (Duplex) > select the preferred duplexing method Note: For the preferred duplexing method, the first number represents sides of the original documents while the second number represents sides of the copy. For example, select “2 sided to 2 sided” if you have two-sided original documents and you want two‑sided copies. 4 Touch > Copy It. Reducing or enlarging copies Copies can be scaled from 25% to 400% of the original document size.
Copying 100 5 Touch . 6 Touch the button that best represents the content source of the document you are copying. • Color Laser—The original document was printed using a color laser printer. • Inkjet—The original document was printed using an inkjet printer. • Magazine—The original document is from a magazine. • Press—The original document was printed using a printing press. • Black/White Laser—The original document was printed using a mono laser printer.
Copying 101 3 From the home screen, navigate to: Copy > Advanced Options > Separator Sheets Note: Set Collate to “1,2,3 ‑ 1,2,3” to place separator sheets between copies. If Collate is set to “1,1,1 ‑ 2,2,2,” then the separator sheets are added to the end of the copy job. For more information, see “Collating copies” on page 100. 4 Select one of the following: • Between Copies • Between Jobs • Between Pages • Off 5 Touch > Copy It.
Copying 102 For example: 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides.
Copying 103 Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides.
Copying 104 • If the paper type or size that you want to copy onto is not loaded in one of the trays, then touch Manual Feeder, and manually load the paper in the multipurpose feeder. • When “Copy to” is set to Auto Size Match, each copy matches the paper size of the original document. If a matching paper size is not in one of the trays, then Paper size not found appears and prompts to load a paper in a tray or multipurpose feeder.
Copying • • • • 105 Newspaper—The original document is from a newspaper. Other—The original document was printed using an alternate or unknown printer. Photo/Film—The original document is a photo from film. Press—The original document was printed using a printing press. Save As Shortcut This option lets you save the current settings by assigning a shortcut name. Note: Selecting this option automatically assigns the next available shortcut number.
E-mailing 106 E-mailing Scanner glass A B C Automatic document feeder (ADF) Use the ADF for multiple‑page documents including two-sided pages. Use the scanner glass for single-page documents, book pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). Setting up the printer to e-mail Setting up the e-mail function 1 Open a Web browser, and then type the printer IP address in the address field.
E-mailing 107 Creating an e-mail shortcut Creating an e-mail shortcut using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings.
E-mailing 108 E-mailing a document Note: You can also e-mail scanned documents by using the Multi Send or MyShortcut application from the home screen. For more information, see “Activating the home screen applications” on page 22. Sending an e-mail using the printer control panel 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
E-mailing 109 Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the home screen, navigate to: E-mail > Recipient(s) > > type the name of the recipient > Search 4 Touch the name of the recipient.
E-mailing 110 Canceling an e-mail • When using the ADF, touch Cancel Job while Scanning appears. • When using the scanner glass, touch Cancel Job while Scanning appears, or while Scan the Next Page / Finish the Job appears. Understanding the e-mail options Recipient(s) This option lets you enter the recipient of your e-mail. You may enter multiple e‑mail addresses. Subject This option lets you type a subject line for your e-mail.
E-mailing 111 Content This option lets you set the original document type and source. Select from the following content types: • • • • Graphics—The original document is mostly business‑type graphics, such as pie charts, bar charts, and animations. Photo—The original document is mostly a photo or an image. Text—The content of the original document is mostly text or line art. Text/Photo—The original document is a mixture of text, graphics, and photos.
E-mailing 112 Using the advanced options Select from the following settings: • Advanced Imaging—This adjusts the Background Removal, Color Balance, Color Dropout, Contrast, JPEG Quality, Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you e‑mail the document. • Custom Job—This combines multiple scanning jobs into a single job. • Edge Erase—This removes smudges or marks around the edges of a document.
Faxing 113 Faxing Scanner glass A B C Automatic document feeder (ADF) Use the ADF for multiple‑page documents including two-sided pages. Use the scanner glass for single-page documents, book pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). Setting up the printer to fax CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm.
Faxing 114 Initial fax setup Many countries and regions require outgoing faxes to contain the following information in a margin at the top or bottom of each transmitted page, or on the first page of the transmission: fax name (identification of the business, other entity, or individual sending the message) and fax number (telephone number of the sending fax machine, business, other entity, or individual). For more information, see “Regulatory notices for telecommunication terminal equipment” on page 343.
Faxing 115 Choosing a fax connection Scenario 1: Standard telephone line Setup 1: Printer is connected to a dedicated fax line To connect: 1 Connect one end of the telephone cable that came with the printer to the 2 Connect the other end of the telephone cable to an active analog wall jack. port of the printer.
Faxing 116 Tips for this setup: • You can set the printer to receive faxes automatically (Auto Answer On) or manually (Auto Answer Off). • If you want to receive faxes automatically (Auto Answer On), then set the printer to pick up on any number of rings that you want.
Faxing 117 Connected to different wall jacks PHONE LINE To connect: 1 Connect one end of the telephone cable that came with the printer to the port of the printer. 2 Connect the other end of the telephone cable to an active analog wall jack. Tips for this setup: • If you have only one telephone number on your line, then you need to set the printer to receive faxes automatically (Auto Answer On). • Set the printer to pick up calls two rings after the answering machine.
Faxing 118 Setup 3: Printer is sharing the line with a telephone subscribed to voice mail service 02 To connect: 1 Connect one end of the telephone cable that came with the printer to the port of the printer. 2 Connect the other end of the telephone cable to an active analog wall jack. 3 Connect the telephone to the port of the printer. Tips for this setup: • This setup works best if you subscribe to a distinctive ring service.
Faxing 119 • You can also set the printer to receive faxes automatically (Auto Answer On), but you need to turn off the voice mail service when you are expecting a fax. This setting works best if you are using voice mail more often than fax. Scenario 2: Digital Subscriber Line (DSL) A Digital Subscriber Line splits your regular telephone line into two channels: voice and Internet. Telephone and fax signals travel through the voice channel, and Internet signals pass through the other channel.
Faxing 120 3 To connect a telephone to the printer, remove any installed adapter plug from the port of the printer, and then connect the telephone to the port. Scenario 3: VoIP telephone service To connect: 1 Connect one end of the telephone cable that came with the printer to the port of the printer. 2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP adapter. Note: The port labeled Phone Line 2 or Fax Port is not always active.
Faxing 121 Tips for this setup: • To make sure that the phone port on the VoIP adapter is active, plug an analog telephone into the phone port, and then listen for a dial tone. If you hear a dial tone, then the port is active. • If you need two phone ports for your devices, but do not want to pay additional cost, then do not plug the printer into the second phone port. You can use a phone splitter.
Faxing 122 1 Connect one end of the telephone cable that came with your printer to the port of the printer. 2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the cable modem. Note: The port labeled Phone Line 2 or Fax Port is not always active. VoIP providers may charge additional cost for activation of the second phone port. 3 Connect your analog telephone phone to the port of the printer.
Faxing 123 1 Connect one end of the telephone cable that came with your printer to the port of the printer. 2 Connect the other end of the telephone cable to an active analog telephone wall jack. 3 Connect your analog telephone to the port of the printer. Scenario 5: Countries or regions with different telephone wall jacks and plugs Some countries or regions may have different types of telephone wall jack connectors than those that came with the printer.
Faxing 124 Connecting the printer to a non‑RJ‑11 wall jack 1 Connect one end of the telephone cable that came with printer to the port of the printer. 2 Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to the wall jack. 3 If you want to connect another device (telephone or answering machine) to the same wall jack, and if the device has a non‑RJ‑11 connector, then connect it directly to the telephone adapter.
Faxing 125 Connecting the printer to a wall jack in Germany The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines. The F port is for telephones.
Faxing 126 Connect the printer to any of the N ports. N F N PHONE 1 Connect one end of the telephone cable that came the printer to the LINE port of the printer. 2 Connect the other end of the telephone cable to the RJ‑11 adapter, and then connect the adapter to an N port. 3 If you want to connect a telephone and answering machine to the same wall jack, then connect the devices as shown. Note: Do not remove the adapter plug from the telephone system.
Faxing 127 Connecting to a distinctive ring service A distinctive ring service may be available from your telephone company. This service lets you have multiple telephone numbers on one telephone line, with each telephone number having a different ring pattern. This may be useful for distinguishing between fax and voice calls.
Faxing 128 Setting the date and time You can set the date and time so that they are printed on every fax you send. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Security > Set Date and Time.
Faxing 129 3 From the home screen, touch Fax. 4 Enter the fax number or a shortcut. Note: To add recipients, touch Next number, and then enter the recipient's telephone number or shortcut number, or search the address book. 5 Touch Fax It. Sending a fax using the computer For Windows users 1 With a document open, click File > Print. 2 Select the printer, and then click Properties, Preferences, Options, or Setup. 3 Click Fax > Enable fax, and then enter the recipient fax number or numbers.
Faxing 130 Sending a fax using the address book The address book lets you search for bookmarks and network directory servers. For more information on enabling the address book feature, contact your system support person. 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray.
Faxing 131 Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Manage Shortcuts > Fax Shortcut Setup. Note: A password may be required. If you do not have an ID and password, then contact your system support person. 3 Type a name for the shortcut, and then enter the fax number.
Faxing 132 4 From the Resolution area, touch the arrows to select the resolution you want. Note: Select a resolution from Standard (fastest speed) to Ultra Fine (best quality at a reduced speed). 5 Touch Fax It. Making a fax lighter or darker 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray.
Faxing 133 Canceling an outgoing fax Canceling a fax while the original documents are still scanning • When using the ADF, touch Cancel Job on the printer control panel while Scanning appears. • When using the scanner glass, touch Cancel Job on the printer control panel while Scanning appears or while Scan the Next Page and Finish the Job appear. Canceling a fax after the original documents have been scanned to memory 1 On the home screen, touch Cancel Jobs. The Cancel Jobs screen appears.
Faxing 134 c From the Time menu, select the time you want the held faxes released. d From the Day(s) menu, select the day you want the held faxes released. 5 Click Add. Forwarding a fax This option lets you print and forward received faxes to a fax number, e‑mail address, FTP site, or LDSS. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen.
Faxing 135 Resolution This option lets you adjust the quality of the fax output. Increasing the image resolution increases the file size and the time needed to scan your original document. Decreasing the image resolution reduces the file size. Select one of the following: • • • • Standard—Use this when faxing most documents. Fine 200 dpi—Use this when faxing documents with small prints. Super fine 300 dpi—Use this when faxing documents with fine details.
Faxing 136 • Transmission Log—This prints the transmission log or transmission error log. • Multifeed Sensor—This detects when the ADF picks more than one sheet of paper at a time, and then shows an error message. Note: This option is supported only in select printer models.
Scanning 137 Scanning Using Scan to Network Scan to Network lets you scan your documents to network destinations specified by your system support person. After the destinations (shared network folders) have been established on the network, the setup process for the application involves installing and configuring the application on the appropriate printer using its Embedded Web Server. For more information, see “Setting up Scan to Network” on page 24.
Scanning 138 Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Navigate to: Settings > Other Settings area > Manage Shortcuts > FTP Shortcut Setup 3 Enter the appropriate information. Note: A password may be required. If you do not have an ID and password, then contact your system support person.
Scanning 139 Scanning to an FTP address using a shortcut number 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides.
Scanning 140 Automatic Document Feeder (ADF) Scanner glass Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). The scanner lets you scan documents directly to a computer or a flash drive. The computer does not have to be directly connected to the printer for you to receive images using Scan to Computer.
Scanning 141 Setting up Scan to Computer Notes: • This feature is supported only in Windows Vista or later. • Make sure your computer and printer are connected to the same network. 1 Open the printers folder, and then select your printer. Note: If your printer is not in the list, then add your printer. 2 Open the printer properties, and then adjust the settings as necessary. 3 From the control panel, touch Scan to Computer > select the appropriate scan setting > Send It.
Scanning 142 Original Size This option lets you set the paper size of the documents you are going to scan. When Original Size is set to Mixed Sizes, you can scan an original document that contains mixed paper sizes (letter‑ and legal‑size pages). Send As This option lets you set the output type for the scan image. Select one of the following: • PDF—Use to create a single file with multiple pages. The PDF can be sent as a secured or compressed file. • TIFF—Use to create multiple files or a single file.
Scanning • • • • • • 143 Inkjet—The original document was printed using an inkjet printer. Magazine—The original document is from a magazine. Newspaper—The original document is from a newspaper. Other—The original document was printed using an alternate or unknown printer. Photo/Film—The original document is a photo from film. Press—The original document was printed using a printing press. Scan Preview This option lets you view the first page of the image before it is included in the file.
Understanding the printer menus 144 Understanding the printer menus Menus list Paper Menu Reports Network/Ports Security Default Source Paper Size/Type Menu Settings Page Device Statistics Active NIC Edit Security Setups Miscellaneous Security Settings Configure MP Network Setup Page Standard USB Confidential Print Substitute Size Network [x] Setup Page Erase Temporary Data Files Paper Texture Shortcut List Parallel [x] Serial [x] Paper Weight Fax Job Log SMTP Setup Set Date and Time
Understanding the printer menus 145 Paper menu Default Source menu Use To Default Source Tray [x] Multipurpose Feeder Manual Paper Manual Envelope Set a default paper source for all print jobs. Notes: • Tray 1 (standard tray) is the factory default setting. • From the Paper menu, set Configure MP to "Cassette" for Multipurpose Feeder to appear as a menu setting. • If two trays contain paper of the same size and type, and the trays have the same settings, then the trays are automatically linked.
Understanding the printer menus 146 Paper Size/Type menu Use To Tray [x] Size A4 A5 A6 JIS‑B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope Specify the paper size loaded in each tray.
Understanding the printer menus 147 Use To MP Feeder Size A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope Specify the paper size loaded in the multipurpose feeder.
Understanding the printer menus 148 Use To Manual Paper Size A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal Specify the size of the paper being manually loaded. Manual Paper Type Plain Paper Card Stock Transparency Recycled Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x] Specify the paper type being manually loaded.
Understanding the printer menus 149 Use To Default ADF Media Type Plain Paper Card Stock Transparency Recycled Labels Vinyl Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom [x] Specify the media type being loaded in the ADF. Note: Plain Paper is the factory default setting. Note: Only installed trays and feeders are listed in this menu.
Understanding the printer menus Use To Transparency Texture Smooth Normal Rough Specify the relative texture of the transparencies loaded in a specific tray. Recycled Texture Smooth Normal Rough Specify the relative texture of the recycled paper loaded in a specific tray. Labels Texture Smooth Normal Rough Specify the relative texture of the labels loaded in a specific tray. Vinyl Labels Texture Smooth Normal Rough Specify the relative texture of the vinyl labels loaded in a specific tray.
Understanding the printer menus 151 Use To Heavy Texture Smooth Normal Rough Specify the relative texture of the heavy paper loaded in a specific tray. Rough/Cotton Texture Rough Specify the relative texture of the rough or cotton paper loaded in a specific tray. Custom [x] Texture Smooth Normal Rough Specify the relative texture of the custom paper loaded in a specific tray. Note: Normal is the factory default setting. Note: Rough is the factory default setting.
Understanding the printer menus 152 Use To Envelope Weight Light Normal Heavy Specify the relative weight of the envelope loaded. Rough Envelope Weight Light Normal Heavy Specify the relative weight of the rough envelope loaded. Letterhead Weight Light Normal Heavy Specify the relative weight of the letterhead loaded. Preprinted Weight Light Normal Heavy Specify the relative weight of the preprinted paper loaded.
Understanding the printer menus 153 Paper Loading menu Use To Card Stock Loading Duplex Off Determine and set two-sided printing for all print jobs with Card Stock as the paper type. Recycled Loading Duplex Off Determine and set two-sided printing for all print jobs with Recycled as the paper type. Labels Loading Duplex Off Determine and set two-sided printing for all print jobs with Labels as the paper type.
Understanding the printer menus 154 Use To Custom [x] Loading Duplex Off Determine and set two-sided printing for all print jobs with Custom [x] as the paper type. Note: Custom [x] Loading is available only when the custom type is supported. Notes: • Off is the factory default setting for all Paper Loading menu selections.
Understanding the printer menus 155 Custom Scan Sizes menu Use To Custom Scan Size [x] Scan Size Name Media Type ADF Media Type Plain Paper Card Stock Transparency Recycled Labels Vinyl Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x] Width 1–8.5 inches (25–216 mm) Height 1–25 inches (25–635 mm) Orientation Portrait Landscape 2 scans per side Off On Specify a custom scan size name, sizes, and orientation.
Understanding the printer menus 156 Use To Portrait Width 3–8.5 inches 76–216 mm Set the portrait width. Notes: • If the width exceeds the maximum, then the printer uses the maximum width allowed. • 8.5 inches is the US factory default setting. You can increase the width in 0.01‑inch increments. • 216 mm is the international factory default setting. You can increase the width in 1‑mm increments. Portrait Height 3–14.17 inches 76–360 mm Set the portrait height.
Understanding the printer menus 157 Use To Fax Job Log Print a report containing information about the last 200 completed faxes. Notes: • This menu item appears only when Enable Job Log is set to On in the Fax Settings menu. • This menu is supported only in some printer models. Fax Call Log Print a report containing information about the last 100 attempted, received, and blocked calls. Notes: • This menu item appears only when Enable Job Log is set to On in the Fax Settings menu.
Understanding the printer menus 158 Network/Ports menu Active NIC menu Use To Active NIC Auto [list of available network cards] Allow the printer to connect to a network. Notes: • Auto is the factory default setting. • This menu item appears only if an optional network adapter is installed. Standard Network or Network [x] menu Note: Only active ports appear in this menu.
Understanding the printer menus 159 Use To Network Buffer Auto 3KB to [maximum size allowed] Set the size of the network input buffer. Notes: • Auto is the factory default setting. • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off. • To increase the maximum size range for the Network Buffer, disable or reduce the size of the parallel, serial, and USB buffers.
Understanding the printer menus 160 Network Card menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > Network Card • Network/Ports > Network [x] > Network [x] Setup > Network Card Use To View Card Status Connected Disconnected View the connection status of the wireless network adapter. View Card Speed View the speed of an active wireless network adapter.
Understanding the printer menus 161 Use To Enable DHCP On Off Specify the DHCP address and parameter assignment. Enable RARP On Off Specify the RARP address assignment setting. Enable BOOTP On Off Specify the BOOTP address assignment setting. Enable AutoIP Yes No Specify the Zero Configuration Networking setting. Enable FTP/TFTP Yes No Enable the built-in FTP server, which lets you send files to the printer using File Transfer Protocol.
Understanding the printer menus 162 Use To Enable IPv6 On Off Enable IPv6 in the printer. Auto Configuration On Off Specify whether or not the network adapter accepts the automatic IPv6 address configuration entries provided by a router. Set Hostname Set the host name. View Address Note: These settings can be changed only from the Embedded Web Server. View Router Address Enable DHCPv6 On Off Note: On is the factory default setting. Note: On is the factory default setting.
Understanding the printer menus 163 Use To Choose Network Select an available network for the printer to use. View Signal Quality View the quality of the wireless connection. View Security Mode View the encryption method for the wireless network.
Understanding the printer menus 164 Use To NPA Mode On Off Auto Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol. Notes: • Auto is the factory default setting. Auto sets the printer to examine data, determine the format, and then process it appropriately. • The printer automatically restarts when changing the setting from the printer control panel. The menu selection is then updated.
Understanding the printer menus 165 Use To ENA Gateway yyy.yyy.yyy.yyy Set the gateway information for an external print server. Note: This menu is available only when the printer is attached to an external print server through the USB port. Parallel [x] menu Note: This menu appears only when an optional parallel card is installed.
Understanding the printer menus 166 Use To Job Buffering Off On Auto Temporarily store print jobs on the printer hard disk before printing. Notes: • Off is the factory default setting. • On buffers print jobs on the printer hard disk. • Auto buffers print jobs only if the printer is busy processing data from another input port. • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.
Understanding the printer menus 167 Use To ENA Gateway yyy.yyy.yyy.yyy Set the gateway information for an external print server. Note: This menu item is available only if the printer is attached to an external print server through the USB port. Serial [x] menu Note: This menu appears only when an optional serial card is installed.
Understanding the printer menus 168 Use To Serial Buffer Disabled Auto 3K to [maximum size allowed] Set the size of the serial input buffer. Notes: • Auto is the factory default setting. • Disabled turns off job buffering. Any jobs already buffered on the disk are printed before normal processing is resumed. • The serial buffer size setting can be changed in 1‑KB increments.
Understanding the printer menus 169 Use To Baud 1200 2400 4800 9600 19200 38400 57600 115200 138200 172800 230400 345600 Specify the rate at which data can be received through the serial port. Data Bits 7 8 Specify the number of data bits sent in each transmission frame. Parity Even Odd None Ignore Set the parity for serial input and output data frames. Honor DSR On Off Determine whether the printer uses the DSR Signal. Notes: • 9600 is the factory default setting.
Understanding the printer menus 170 Use To Use SSL Disabled Negotiate Required Set the printer to use SSL for increased security when connecting to the SMTP server. Notes: • Disabled is the factory default setting. • When the Negotiate setting is used, the SMTP server determines if SSL will be used. SMTP Server Authentication No authentication required Login/Plain CRAM‑MD5 Digest‑MD5 NTLM Kerberos 5 Specify the type of user authentication required for scan‑to e‑mail privileges.
Understanding the printer menus 171 Use To Edit Building Blocks Internal Accounts NTLM Simple Kerberos Setup Kerberos Setup Active Directory LDAP LDAP+GSSAPI Password PIN Edit settings for Internal Accounts, NTLM, Simple Kerberos Setup, Kerberos Setup, Active Directory, LDAP, Password, and PIN. Edit Security Templates [list of available templates] Add or edit a security template.
Understanding the printer menus 172 Use To Security Reset Jumper Access controls=”No Security” No Effect Reset factory security defaults Change the value of the security settings. Notes: • Access controls=”No Security” retains all the security information that the user has defined. “No Security" is the factory default setting. • “No Effect” means the reset has no effect on the device’s security configuration.
Understanding the printer menus 173 Use To Repeat Job Expiration Off 1 hour 4 hours 24 hours 1 week Set a limit on how long the printer stores print jobs. Verify Job Expiration Off 1 hour 4 hours 24 hours 1 week Set a limit on how long the printer stores print jobs needing verification. Reserve Job Expiration Off 1 hour 4 hours 24 hours 1 week Set a limit on how long the printer stores print jobs for printing at a later time. Note: Off is the factory default setting.
Understanding the printer menus 174 Security Audit Log menu Use To Export Log Enable an authorized user to export the security log. Notes: • To export the log from the printer control panel, attach a flash drive to the printer. • To export the log from the Embedded Web Server, download the log to a computer. Delete Log Yes No Specify whether audit logs are deleted.
Understanding the printer menus Use 175 To Configure Log (continued) Specify how audit logs are configured. Admin’s e-mail address Notes: [256 character string] • “Admin’s e‑mail address” determines if administrators are automatically Digitally sign exports notified of certain log events. This setting can have one or more e‑mail Off addresses (separated by commas). On • “Digitally sign exports” determines if the printer automatically signs each Severity of events to log exported security log.
Understanding the printer menus 176 Use To Automatically Observe DST On Off Set the printer to use the applicable daylight saving time (DST) start and end times associated with the printer Time Zone setting. Custom Time Zone Setup DST Start Week DST Start Day DST Start Month DST Start Time DST End Week DST End Day DST End Month DST End Time DST Offset Enable the user to set up the time zone. Enable NTP On Off Enable Network Time Protocol, which synchronizes the clocks of devices on a network.
Understanding the printer menus 177 Settings menu General Settings menu Use To Display Language English Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portugues Suomi Russian Polski Greek Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese Set the language of the text appearing on the display.
Understanding the printer menus 178 Use To Run Initial setup Yes No Run the setup wizard. Keyboard Keyboard Type English Francais Francais Canadien Deutsch Italiano Espanol Greek Dansk Norsk Nederlands Svenska Suomi Portugues Russian Polski Swiss German Swiss French Korean Magyar Turkish Czech Simplified Chinese Traditional Chinese Japanese Custom Key [x] Specify a language and custom key information for the display keyboard. Paper Sizes U.S. Metric Specify the unit of measurement for paper sizes.
Understanding the printer menus 179 Use To Displayed Information Left side Right side Custom Text [x] Specify what is displayed on the upper corners of the home screen. For Left side and Right side, select from the following options: None IP Address Hostname Contact Name Location Date/Time mDNS/DDNS Service Name Zero Configuration Name Custom Text [x] Model Name Notes: • IP Address is the factory default setting for Left side. • Date/Time is the factory default setting for Right side.
Understanding the printer menus 180 Use To Displayed Information (continued) Paper Jam Load Paper Service Errors Customize the displayed information for certain menus. Select from the following options: Display Yes No Message to display Default Alternate Default [text entry] Alternate [text entry] Notes: • No is the factory default setting for Display. • Default is the factory default setting for Message to Display.
Understanding the printer menus 181 Use To Screen Brightness 20–100 Specify the brightness of the display. One Page Copy Off On Set copies from the scanner glass to only one page at a time. Output Lighting Normal/Standby Mode Off Dim Bright Set the output lighting for the standard bin. Note: 100 is the factory default setting. Note: Off is the factory default setting. Notes: • Dim is the factory default setting if Eco-Mode is set to Energy or Energy/Paper.
Understanding the printer menus 182 Use To Web Page Refresh Rate 30–300 Specify the number of seconds between Embedded Web Server refreshes. Note: 120 is the factory default setting. Contact Name Specify a contact name. Note: The contact name is stored on the Embedded Web Server. Location Specify the location. Note: The location is stored on the Embedded Web Server. Alarms Alarm Control Cartridge Alarm Set an alarm when the printer requires user intervention.
Understanding the printer menus 183 Use To Timeouts Hibernate Timeout Disabled 20 seconds 1–3 hours 6 hours 1–3 days 1–2 weeks 1 month Set the amount of time before the printer enters Hibernate mode. Hibernate Timeout on Connection Hibernate Do Not Hibernate Set the printer to Hibernate mode even if there is an active Ethernet or phone connection. Timeouts Screen Timeout 15–300 Set the amount of time in seconds before returning the control panel to a Ready state.
Understanding the printer menus 184 Use To Error Recovery Auto Reboot Reboot when idle Reboot always Reboot never Set the printer to restart when an error occurs Error Recovery Max Auto Reboots 1–20 Determine the number of automatic reboots the printer can perform. Print Recovery Let the printer automatically continue printing from certain offline situations when these are not resolved within the specified time period.
Understanding the printer menus 185 Use To Factory Defaults Do Not Restore Restore Now Use the printer factory default settings. Export Configuration Package Export Export the printer configuration file to a flash drive. Note: Do Not Restore is the factory default setting. Copy Settings menu Use To Content Type Text Graphics Text/Photo Photo Specify the content of the original document.
Understanding the printer menus 186 Use To Collate (1,1,1) (2,2,2) (1,2,3) (1,2,3) Keep the pages of a print job stacked in sequence when printing multiple copies. Original Size Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Difficult Media Letter Difficult Media A5 Difficult Media Legal Difficult Media A4 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in. ID Card Specify the paper size of the original document.
Understanding the printer menus 187 Use To Darkness 1–9 Specify the level of darkness for the copy job. Number of Copies 1–999 Specify the number of copies for the copy job. Header/Footer [Location] Off Date/Time Page number Custom text Print on All pages First page only All but first page Custom text Specify the header or footer information and its location on the page. Overlay Confidential Copy Draft Urgent Custom Off Specify the overlay text printed on each page of the copy job.
Understanding the printer menus 188 Use To Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specify which color to drop during scanning and to adjust the dropout setting for each color threshold. Contrast 0–5 Best for content Specify the contrast used for the copy job. Mirror Image Off On Create a mirror image of the original document. Negative Image Off On Create a negative image of the original document.
Understanding the printer menus 189 Use To Optimize Fax Compatibility Optimize fax compatibility with other fax machines. Fax Name Specify the name of the fax in the printer. Fax Number Specify the number assigned to the fax. Fax ID Fax Name Fax Number Specify how the fax is identified. Enable Manual Fax On Off Set the printer to fax manually, which requires a line splitter and a telephone handset. Note: Fax Number is the factory default setting. Notes: • Off is the factory default setting.
Understanding the printer menus 190 Use To Fax Cover Page Fax Cover Page Off by default On by default Never use Always use Include to Field On Off Include from Field On Off From Include Message Field On Off Message Include Logo On Off Include Footer [x] On Off Footer [x] Configure the fax cover page. Notes: • Off by default is the factory default setting for Fax Cover Page. • Off is the factory default setting for all other menu items.
Understanding the printer menus 191 Use To Original Size Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in. Specify the size of the original document. Sides (Duplex) Off Long edge Short edge Specify the orientation of the original documents loaded in the ADF for two‑sided scanning. Content Type Text Graphics Text/Photo Photo Specify the content of the original document.
Understanding the printer menus 192 Use To Automatic Redial 0–9 Specify the number of times the printer tries to send the fax to a specified number. Redial frequency 1–200 Specify the number of minutes between redials. Behind a PABX Yes No Enable or disable switchboard blind dialing without a dial tone. Enable ECM Yes No Enable or disable Error Correction Mode for fax jobs. Enable Fax Scans On Off Fax files that are scanned at the printer.
Understanding the printer menus 193 Use To Color Balance Cyan - Red Magenta - Green Yellow - Blue Enable an equal balance of colors in the scanned image. Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specify which color to drop and to adjust the dropout setting for each color threshold. Contrast 0–5 Best for content Specify the contrast in the scanned image.
Understanding the printer menus 194 Use To Enable Color Fax Scans Off by default On by default Never use Always use Enable color faxing. Note: Off by default is the factory default setting. Auto Convert Color Faxes to Mono Convert all outgoing faxes to black and white. Faxes Note: On is the factory default setting. On Off Fax Receive Settings Use To Enable Fax Receive On Off Allow the printer to receive fax jobs. Enable Caller ID On Off Display the caller ID information of an incoming fax.
Understanding the printer menus 195 Use To Separator Sheets Off Before Job After Job Enable the printer to include separator sheets for incoming fax jobs. Separator Sheet Source Tray [x] Multipurpose Feeder Specify the paper source for the separator sheet. Output Bin Standard Bin Bin [x] Specify a bin for received faxes. Fax Footer On Off Print the transmission information at the bottom of each page from a received fax.
Understanding the printer menus 196 Use To Enable Color Fax Receive On Off Enable the printer to receive fax in color and print it in grayscale. Note: On is the factory default setting. Fax Log Settings Use To Transmission Log Print log Do not print log Print only for error Enable printing of a transmission log after each fax job. Receive Error Log Print Never Print on Error Enable printing of a received error log. Auto Print Logs On Off Enable automatic printing of fax logs.
Understanding the printer menus 197 Use To Speaker Volume High Low Set the speaker volume to high or low. Ringer Volume Off On Enable or disable the ringer volume. Note: High is the factory default setting. Note: On is the factory default setting. Answer On Use All Rings Single Ring Only Double Ring Only Triple Ring Only Single or Double Rings Only Single or Triple Rings Only Double or Triple Rings Only To Specify ring patterns when the printer is answering calls.
Understanding the printer menus 198 Use To Content Source Black/White Laser Color Laser Inkjet Photo/Film Magazine Newspaper Press Other Specify how the content was originally produced. Fax Resolution Standard Fine 200 dpi Super Fine 300 dpi Ultra Fine 600 dpi Specify quality in dots per inch (dpi). Darkness 1–9 Lighten or darken the output. Orientation Portrait Landscape Specify the orientation of the scanned image.
Understanding the printer menus 199 Use To Use Multi‑Page TIFF On Off Provide a choice between single‑page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑fax job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the scan job. Note: On is the factory default setting. Enable Analog Receive Off On Enable receiving of analog faxes. Note: Off is the factory default setting.
Understanding the printer menus 200 Use To Format PDF (.pdf) TIFF (.tif) JPEG (.jpg) XPS (.xps) RTF (.rtf) TXT (.txt) Specify the file format. PDF Settings PDF Version 1.2–1.7 A–1a A–1b PDF Compression Normal High Secure PDF Off On Searchable PDF Off On Configure the PDF settings. Content Type Text Graphics Text/Photo Photo Specify the content of the original document.
Understanding the printer menus 201 Use To Resolution 75 dpi 150 dpi 200 dpi 300 dpi 400 dpi 600 dpi Specify the resolution of the scan in dots per inch. Darkness 1–9 Lighten or darken the output. Orientation Portrait Landscape Specify the orientation of the scanned image.
Understanding the printer menus 202 Use To Text Default 5–90 Set the quality of a text image in relation to file size and quality of the image. Text/Photo Default 5–90 Set the quality of a text or photo image in relation to file size and the quality of the image. Note: 75 is the factory default setting. Note: 75 is the factory default setting. Photo Default 5–90 Set the quality of a photo image in relation to file size and the quality of the image.
Understanding the printer menus 203 Use To Allow Save as Shortcut On Off Save e-mail addresses as shortcuts. Notes: • On is the factory default setting. • When set to Off, the Save As Shortcut button does not appear on the e-mail Destination screen. Background Removal ‑4 to 4 Adjust the amount of background visible on a scanned image. Color Balance Cyan - Red Magenta - Green Yellow - Blue Enable an equal balance of colors in the output.
Understanding the printer menus 204 Use To Sharpness 1–5 Adjust the amount of sharpness on a scanned image. Temperature ‑4 to 4 Specify warm or cool outputs. Cool values generate a bluer output than the default while warm values generate a redder output than the default. Use cc:/bcc: Off On Enable the use of the cc: and bcc: fields. Note: 3 is the factory default setting. Note: Off is the factory default setting. FTP Settings menu Use To Format PDF (.pdf) TIFF (.tif) JPEG (.jpg) XPS (.
Understanding the printer menus 205 Use To Content Source Black/White Laser Color Laser Inkjet Photo/Film Magazine Newspaper Press Other Specify how the original document was produced. Color Off On Specify whether the printer captures and transmits content in color. Resolution 75 dpi 150 dpi 200 dpi 300 dpi 400 dpi 600 dpi Specify the quality of the scan in dots per inch (dpi). Darkness 1–9 Lighten or darken the output.
Understanding the printer menus 206 Use To Original Size Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Difficult Media Letter Difficult Media A5 Difficult Media Legal Difficult Media A4 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in. Specify the size of the original document. Sides (Duplex) Off Long Edge Short Edge Specify the orientation of the original documents loaded in the ADF for two‑sided scanning.
Understanding the printer menus 207 Use To Use Multi‑Page TIFF On Off Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑FTP job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job. Note: On is the factory default setting. TIFF Compression LZW JPEG Specify the format used in compressing TIFF files.
Understanding the printer menus 208 Use To Color Balance Cyan - Red Magenta - Green Yellow - Blue Enable an equal balance of colors in the scanned image. Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specify which color to drop and to adjust the dropout setting for each color threshold. Contrast 0–5 Best for content Specify the contrast of the output.
Understanding the printer menus 209 Flash Drive menu Scan Settings Use To Format PDF (.pdf) TIFF (.tif) JPEG (.jpg) XPS (.xps) RTF (.rtf) TXT (.txt) Specify the format of the scanned file. PDF Settings PDF Version 1.2–1.7 A–1a PDF Compression Normal High Secure PDF Off On Searchable PDF Off On Configure the PDF settings. Content Type Text Graphics Text/Photo Photo Specify the content of the original document.
Understanding the printer menus 210 Use To Resolution 75 dpi 150 dpi 200 dpi 300 dpi 400 dpi 600 dpi Specify the resolution of the scan in dots per inch (dpi). Darkness 1–9 Lighten or darken the output. Orientation Portrait Landscape Specify the orientation of the scanned image.
Understanding the printer menus 211 Use To JPEG Quality Best for content 5–90 Set the quality of a JPEG photo image in relation to file size and quality. Text Default 5–90 Set the quality of the text in relation to file size and the quality of the image. Text or Photo Default 5–90 Set the quality of a text or photo image in relation to file size and quality. Photo Default 5–90 Set the quality of a photo image in relation to file size and quality.
Understanding the printer menus 212 Use To Contrast 0–5 Best for content Specify the contrast of the output. Mirror Image Off On Create a mirror image of the original document. Negative Image Off On Create a negative image of the original document. Shadow Detail ‑4 to 4 Adjust the amount of shadow detail visible on a scanned image. Scan edge to edge Off On Specify whether the original document is scanned edge-to-edge. Sharpness 1–5 Adjust the amount of sharpness on a scanned image.
Understanding the printer menus Use 213 To Paper Saver Orientation Specify the orientation of a multiple‑page document. Auto Notes: Landscape • Auto is the factory default setting. Portrait • This setting affects jobs if the value of the Paper Saver setting in the same menu is not set to Off. Paper Saver Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up Specify that multiple pages are printed on one side of a sheet. Paper Saver Border None Solid Print a border on each page image.
Understanding the printer menus 214 OCR Settings menu Use To Auto Rotate On Off Automatically rotate scanned documents for proper orientation. Despeckle Off On Remove specks from a scanned image. Inverse Detection On Off Recognize and make the white text on a black background editable. Auto Contrast Enhance Off On Automatically adjust the contrast to improve OCR quality.
Understanding the printer menus 215 Use To Job Waiting On Off Specify that print jobs be removed from the print queue if they require unavailable printer options or custom settings. They are stored in a separate print queue, so other jobs print normally. When the missing information or options are obtained, the stored jobs print. Notes: • Off is the factory default setting. • This menu appears only when a printer hard disk is installed.
Understanding the printer menus 216 Use To Print All Order Alphabetical Oldest First Newest First Specify the order in which held and confidential jobs are printed when Print All is selected. Note: Alphabetical is the factory default setting. Print jobs always appear in alphabetical order on the printer control panel. Finishing menu Use To Sides (Duplex) 1 sided 2 sided Specify whether two‑sided (duplex) printing is set as the default for all print jobs.
Understanding the printer menus 217 Use To Separator Sheets Off Between Copies Between Jobs Between Pages Specify whether blank separator sheets are inserted. Notes: • Off is the factory default setting. • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to “(1,2,3) (1,2,3).” If Collate is set to “(1,1,1) (2,2,2),” then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
Understanding the printer menus 218 Quality menu Use To Print Resolution 300 dpi 600 dpi 1200 dpi 1200 Image Q 2400 Image Q Specify the printed output resolution in dots per inch. Pixel Boost Off Fonts Horizontally Vertically Both directions Enable more pixels to print in clusters for clarity, in order to enhance images horizontally or vertically, or to enhance fonts. Toner Darkness 1–10 Lighten or darken the printed output. Note: 600 dpi is the factory default setting.
Understanding the printer menus 219 Use To Accounting Log Frequency Daily Weekly Monthly Determine and set how often a log file is created. Log Action at End of Frequency None E‑mail Current Log E‑mail & Delete Current Log Post Current Log Post & Delete Current Log Determine and set how the printer responds when the frequency threshold expires. Log Near Full Level Off 1–99 Specify the maximum size of the log file before the printer executes the Log Action at Near Full.
Understanding the printer menus 220 Utilities menu Use To Remove Held Jobs Confidential Held Not Restored All Delete confidential and held jobs from the printer hard disk. Notes: • Selecting a setting affects only print jobs that are resident in the printer. Bookmarks, print jobs on flash drives, and other types of held jobs are not affected. • Not Restored removes all Print and Hold jobs that are not restored from the printer hard disk or memory. Format Flash Yes No Format the flash memory.
Understanding the printer menus 221 XPS menu Use To Print Error Pages Off On Print a page containing information on errors, including XML markup errors. Note: Off is the factory default setting. PDF menu Use To Scale to Fit Yes No Scale page content to fit the selected paper size. Annotations Do Not Print Print Print annotations in a PDF. Note: No is the factory default setting. Note: Do Not Print is the factory default setting.
Understanding the printer menus 222 PCL Emul menu Use To Font Source Resident Disk Download Flash All Specify the set of fonts used by the Font Name menu. Notes: • “Resident” is the factory default setting. Resident shows the factory default set of fonts downloaded in the RAM. • “Flash” and “Disk” settings show all fonts resident in that option. • The flash option must be properly formatted and cannot be read/write‑, write‑, or password‑protected.
Understanding the printer menus 223 Use To PCL Emulation Settings Lines per Page 1–255 Specify the number of lines that print on each page. Notes: • 60 is the US factory default setting. 64 is the international default setting. • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the Paper Size and Orientation you want before setting Lines per Page.
Understanding the printer menus 224 Use To Tray Renumber View Factory Defaults MPF Default = 8 T1 Default = 1 T1 Default = 4 T1 Default = 5 T1 Default = 20 T1 Default = 21 Env Default = 6 MPaper Default = 2 MEnv Default = 3 Display the factory default setting assigned to each tray or feeder. Tray Renumber Restore Defaults Yes No Restore all tray and feeder assignments to the factory default settings.
Understanding the printer menus 225 Use To Font Size 1–255 pt Set the default font size for HTML documents. Notes: • 12 pt is the factory default setting. • Font size can be increased in 1‑point increments. Scale 1–400% Scale the default font for HTML documents. Notes: • 100% is the factory default setting. • Scaling can be increased in 1% increments. Orientation Portrait Landscape Set the page orientation for HTML documents. Margin Size 8–255 mm Set the page margin for HTML documents.
Understanding the printer menus 226 Use To Orientation Portrait Landscape Reverse Portrait Reverse Landscape Set the image orientation. Note: Portrait is the factory default setting.
Saving money and the environment 227 Saving money and the environment Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see: • The Notices chapter • The Environmental Sustainability section of the Lexmark Web site at www.lexmark.
Saving money and the environment 228 Check your first draft for accuracy Before printing or making multiple copies of a document: • Use the preview feature to see how the document looks like before you print it. • Print one copy of the document to check its content and format for accuracy. Avoid paper jams Correctly set the paper type and size to avoid paper jams. For more information, see “Avoiding jams” on page 254.
Saving money and the environment 229 Use To On Reduce printer noise. Notes: • Print jobs are processed at a reduced speed. • Printer engine motors do not start until a document is ready to print. There will be a short delay before the first page is printed. Off Use factory default settings. Note: This setting supports the performance specifications of the printer. 3 Click Submit.
Saving money and the environment 230 Notes: • The IP address is located on the upper portion of the home screen. It appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Select Settings > General Settings. 3 In the Screen Brightness field, enter the brightness percentage you want for the display. 4 Apply the changes.
Saving money and the environment 231 When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark will recycle the box. Returning Lexmark cartridges for reuse or recycling Lexmark Cartridge Collection Program diverts millions of Lexmark cartridges from landfills annually by making it both easy and free for Lexmark customers to return used cartridges to Lexmark for reuse or recycling.
Securing the printer 232 Securing the printer Statement of Volatility Your printer contains various types of memory that can store device and network settings, and user data. Type of memory Description Volatile memory Your printer uses standard random access memory (RAM) to temporarily buffer user data during simple print jobs. Non-volatile memory Your printer may use two forms of non-volatile memory: EEPROM and NAND (flash memory).
Securing the printer 233 Erasing non‑volatile memory Erase individual settings, device and network settings, security settings, and embedded solutions by following these steps: 1 Turn off the printer. 2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears. The printer performs a power-on sequence, and then the Configuration menu appears.
Securing the printer 234 The printer will perform a power‑on reset, and then return to normal operating mode. Configuring printer hard disk encryption Enable hard disk encryption to prevent loss of sensitive data in the event the printer or its hard disk is stolen. Note: Some printer models may not have a printer hard disk installed. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field.
Securing the printer 235 The printer will perform a power‑on reset, and then return to normal operating mode. Finding printer security information In high-security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer cannot be accessed by unauthorized persons. For more information, visit the Lexmark security Web page. You can also see the Embedded Web Server — Security: Administrator’s Guide for additional information: 1 Go to www.lexmark.
Maintaining the printer 236 Maintaining the printer Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and supplies, may cause damage to your printer. Cleaning printer parts Cleaning the printer Note: You may need to perform this task after every few months. Warning—Potential Damage: Damage to the printer caused by improper handling is not covered by the printer warranty. 1 Make sure that the printer is turned off and unplugged from the electrical outlet.
Maintaining the printer Cleaning the scanner glass Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images. 1 Slightly dampen a soft, lint-free cloth or paper towel with water. 2 Open the scanner cover. 3 Remove the white underside of the scanner cover.
Maintaining the printer 238 4 Open the bottom ADF door. 2 1 5 Wipe the ADF scanner glass under the ADF door. 6 Close the bottom ADF door. 7 Place the white underside of the scanner cover on the scanner glass, and then close the scanner cover.
Maintaining the printer 239 8 Wipe the areas shown, and then let them dry. 4 1 3 2 1 White underside of the scanner cover 2 Scanner glass 3 ADF glass 4 White underside of the ADF cover 9 Close the scanner cover. Checking the status of parts and supplies A message appears on the display when a replacement supply item is needed or when maintenance is required. Checking the status of parts and supplies on the printer control panel From the home screen, touch Status/Supplies > View Supplies.
Maintaining the printer 240 Ordering parts and supplies To order parts and supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, go to the Lexmark Web site at www.lexmark.com or contact the place where you purchased the printer. Note: All life estimates for printer supplies assume printing on letter‑ or A4‑size plain paper.
Maintaining the printer 241 Item Return Program cartridge Asia Pacific region (includes Australia and New Zealand) Toner Cartridge 623 High Yield Toner Cartridge 623H Extra High Yield Toner Cartridge 623X* Latin America (includes Puerto Rico and Mexico) Toner Cartridge 624 High Yield Toner Cartridge 624H Extra High Yield Toner Cartridge 624X* Africa, Middle East, Central Eastern Europe (non‑EU), and Commonwealth of Independent States (CIS) Toner Cartridge 625 High Yield Toner Cartridge 62
Maintaining the printer 242 Ordering a maintenance kit To identify the supported fuser type, view the label on the fuser. Do either of the following: • Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on the front of the fuser. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. • Pull down the printer rear door.
Maintaining the printer 243 Storing supplies Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them. Do not expose supplies to: • • • • • • Direct sunlight Temperatures above 35°C (95°F) High humidity above 80% Salty air Corrosive gases Heavy dust Replacing supplies Replacing the toner cartridge 1 Lift the front cover, and then pull down the multipurpose feeder door.
Maintaining the printer 244 2 Pull the cartridge out of the printer using the handle. 3 Unpack the new toner cartridge, then remove the packing material, and then shake the cartridge to redistribute the toner. 4 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer. Note: Make sure the cartridge is fully pushed in.
Maintaining the printer 245 5 Close the multipurpose feeder door and the front cover. 2 1 Replacing the imaging unit 1 Lift the front cover, and then pull down the multipurpose feeder door.
Maintaining the printer 2 Pull out the toner cartridge from the printer using the handle. 3 Lift the green handle, and then pull out the imaging unit from the printer.
Maintaining the printer 247 4 Unpack the new imaging unit, and then shake it. 5 Remove all packing material from the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning—Potential Damage: Do not touch the photoconductor drum. Doing so may affect the print quality of future print jobs.
Maintaining the printer 248 7 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer. 8 Close the multipurpose feeder door and the front cover.
Maintaining the printer 249 Moving the printer CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. Before moving the printer CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage: • Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet. • Disconnect all cords and cables from the printer before moving it.
Maintaining the printer 250 Moving the printer to another location The printer and its hardware options can be safely moved to another location by following these precautions: • Any cart used to move the printer must have a surface able to support the full footprint of the printer. • Any cart used to move the hardware options must have a surface able to support the dimensions of the hardware options. • Keep the printer in an upright position. • Avoid severe jarring movements.
Managing the printer 251 Managing the printer Finding advanced networking and administrator information This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server — Security: Administrator's Guide on the Lexmark support Web site at http://support.lexmark.com.
Managing the printer 252 Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Reports, and then click the type of report you want to view.
Managing the printer 253 Restoring factory default settings If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings. For more information, see “Printing a menu settings page” on page 57. If you want a more comprehensive method of restoring the printer factory default settings, then perform the Wipe All Settings option. For more information, see “Erasing non‑volatile memory” on page 233.
Clearing jams 254 Clearing jams By carefully selecting paper and specialty media and loading it properly, you should be able to avoid most jams. If jams occur, then follow the steps outlined in this chapter. Warning—Potential Damage: Never use any tool to remove a jam. Doing so could permanently damage the fuser. Avoiding jams Load paper properly • Make sure paper lies flat in the tray. Correct loading of paper Incorrect loading of paper • Do not remove a tray while the printer is printing.
Clearing jams 255 • Do not slide the paper into the tray. Load paper as shown in the illustration. • Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing tightly against the paper or envelopes. • Push the tray firmly into the printer after loading paper. Use recommended paper • Use only recommended paper or specialty media. • Do not load wrinkled, creased, damp, bent, or curled paper. • Flex, fan, and straighten paper before loading it.
Clearing jams 256 Notes: • When Jam Assist is set to On, the printer flushes blank pages or pages with partial prints to the standard bin after a jammed page has been cleared. Check your printed output for blank pages. • When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto setting reprints jammed pages if adequate printer memory is available.
Clearing jams 257 [x]‑page jam, lift front cover to remove cartridge. [200–201] CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 1 Lift the front cover, and then pull down the multipurpose feeder door. 1 2 2 Lift the green handle, and then pull out the toner cartridge from the printer. 3 Place the toner cartridge aside.
Clearing jams 258 4 Lift the green handle, and then pull out the imaging unit from the printer. 1 2 5 Place the imaging unit aside on a flat, smooth surface. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning—Potential Damage: Do not touch the photoconductor drum. Doing so may affect the print quality of future print jobs.
Clearing jams 7 Install the imaging unit. Note: Use the arrows on the side of the printer as a guide. 8 Insert the toner cartridge into the printer, and then push the green handle back into place. Notes: • Align the arrows on the guides of the toner cartridge with the arrows in the printer. • Make sure the cartridge is fully pushed in.
Clearing jams 260 9 Close the multipurpose feeder door and the front cover. 2 1 10 From the printer control panel, touch Done to clear the message and continue printing. [x]‑page jam, open upper rear door. [202] CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 1 Pull down the rear door. 2 Firmly grasp the jammed paper on each side, and then gently pull it out.
Clearing jams 3 Close the rear door. 4 From the printer control panel, touch Done to clear the message and continue printing. [x]‑page jam, open upper and lower rear door. [231–234] CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 1 Pull down the rear door. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed.
Clearing jams 3 Close the rear door. 4 Push the back of the standard tray. 5 Press down the rear duplex flap, then firmly grasp the jammed paper, and then gently pull the paper out. Note: Make sure all paper fragments are removed.
Clearing jams 263 2 1 6 Insert the standard tray. 7 From the printer control panel, touch Done to clear the message and continue printing. [x]‑page jam, remove standard bin jam. [203] 1 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed.
Clearing jams 264 2 From the printer control panel, touch Done to clear the message and continue printing. [x]‑page jam, remove tray 1 to clear duplex. [235–239] 1 Pull out the tray completely. Note: Lift the tray slightly, and then pull it out. 2 3 1 2 Push down the front duplex flap, then firmly grasp the jammed paper, and then gently pull the paper to the right and out of the printer. Note: Make sure all paper fragments are removed.
Clearing jams 265 2 1 3 Insert the tray. 4 From the printer control panel, touch Done to clear the message and continue printing. [x]‑page jam, open tray [x]. [24x] 1 Check which tray is indicated on the printer display, and then pull the tray. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed.
Clearing jams 3 Insert the tray. 4 From the printer control panel, touch Done to clear the message and continue printing. [x]‑page jam, clear manual feeder. [250] 1 From the multipurpose feeder, firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed.
Clearing jams 267 2 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 3 Reload paper into the multipurpose feeder. 4 Slide the paper guide until it rests lightly against the edge of the paper. 5 From the printer control panel, touch Done to clear the message and continue printing.
Clearing jams 268 [x]‑page jam, open automatic feeder top cover. [28y.xx] 1 Remove all original documents from the ADF tray. Note: The message is cleared when the pages are removed from the ADF tray. 2 Open the ADF cover. 3 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 4 Close the ADF cover. 5 Open the scanner cover.
Clearing jams 269 2 1 7 Close the bottom ADF door. 8 Straighten the edges of the original documents, then load the documents into the ADF, and then adjust the paper guide. 9 From the printer control panel, touch Done to clear the message and continue printing.
Troubleshooting 270 Troubleshooting Understanding the printer messages Cartridge low [88.xy] You may need to order a replacement toner cartridge. If necessary, touch Continue on the printer control panel to clear the message and continue printing. Cartridge nearly low [88.xy] If necessary, touch Continue on the printer control panel to clear the message and continue printing. Cartridge very low, [x] estimated pages remain [88.xy] You may need to replace the toner cartridge very soon.
Troubleshooting 271 Change [paper source] to [paper size] load [orientation] Try one or more of the following: • Load the correct size and type of paper in the tray or feeder, specify the size and type of paper in the Paper menu on the control panel, and then touch Finished changing paper. • Touch Use current [paper source] to use the available size and type of paper in the current tray or feeder. • Touch Reset active bin to reset the active bin for a linked set of bins. • Cancel the print job.
Troubleshooting 272 Close flatbed cover and load originals if restarting job [2yy.xx] Try one or more of the following: • Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan job. • Touch Scan from flatbed to continue scanning from the scanner glass immediately after the last successful scan job. • Touch Finish job without further scanning to end the last successful scan job. Note: This does not cancel the scan job.
Troubleshooting 273 Disk full [62] Try one or more of the following: • From the printer control panel, touch Continue to clear the message and continue processing. • Delete fonts, macros, and other data stored in the printer hard disk. • Install a printer hard disk with larger capacity. Disk full, scan job canceled Try one or more of the following: • Touch Continue to clear the message and continue scanning. • Delete fonts, macros, and other data stored in the printer hard disk.
Troubleshooting 274 Fax server 'To Format' not set up. Contact system administrator. Try one or more of the following: • From the printer control panel, touch Continue to clear the message. • Complete the Fax Server setup. If the message appears again, then contact your system support person. Fax Station Name not set up. Contact system administrator. Try either of the following: • From the printer control panel, touch Continue to clear the message. • Complete the Analog Fax setup.
Troubleshooting 275 Incorrect paper size, open [paper source] [34] Try one or more of the following: • Load the correct size and type of paper in the tray, and then specify the paper size and type in the Paper menu on the printer control panel. • Make sure the correct paper size and type are specified in Print Properties or the Print dialog settings. • Check if the paper size is correctly set.
Troubleshooting 276 Insufficient memory for Flash Memory Defragment operation [37] Try one or more of the following: • From the printer control panel, touch Continue to stop the defragmentation and continue printing. • Delete fonts, macros, and other data in the printer memory. • Install additional printer memory.
Troubleshooting 277 Load [paper source] with [paper size] [paper orientation] Try one or more of the following: • Load the tray or feeder with the correct size of paper, and then touch Finished loading paper on the control panel. • Touch Reset active bin to reset the active bin for a linked set of bins. • Cancel the current job.
Troubleshooting 278 Load Manual Feeder with [paper type] [paper size] [paper orientation] Try one or more of the following: • Load the feeder with the correct size and type of paper. • From the printer control panel, touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing. • From the printer control panel, touch Automatically select paper to use the paper loaded in the tray. • Cancel the print job. Maintenance kit low [80.
Troubleshooting 279 Misfeed cleared, extra sheets in output bin [24y.xx] Select Continue on the printer control panel to clear the message and continue printing. Note: To reduce misfeeds, make sure that media is fanned and loaded properly. Network [x] software error [54] Try one or more of the following: • From the printer control panel, touch Continue to continue printing. • Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
Troubleshooting Paper changes needed Try one or more of the following: • Touch Use current supplies to clear the message and continue printing. • Cancel the current print job. Parallel port [x] disabled [56] Try one or more of the following: • From the printer control panel, touch Continue to clear the message. • Enable the parallel port.
Troubleshooting 281 Remove packaging material, [area name] Remove any remaining packaging material from the specified location. Remove paper from standard output bin Remove the paper stack from the standard bin. Replace all originals if restarting job. Try one or more of the following: • Touch Cancel job to clear the message and cancel the scan job. • Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan job.
Troubleshooting 282 Replace imaging unit, 0 estimated pages remain [84.xy] Replace the imaging unit to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide. Note: If you do not have a replacement imaging unit, then see the “Ordering supplies” section of the User’s Guide or visit www.lexmark.com. Replace jammed originals if restarting job.
Troubleshooting 283 Replace separator pad Try one or more of the following: • Replace the separator pad. For more information, see the instruction sheet that came with the supply. • From the printer control panel, touch Ignore to clear the message. Replace unsupported cartridge [32.xy] Remove the toner cartridge, and then install a supported one to clear the message and continue printing.
Troubleshooting 284 Scanner disabled. Contact system administrator if problem persists. [840.02] Try one or more of the following: • Touch Continue with scanner disabled to return to the home screen, and then contact your system support person. • Touch Reboot and automatically enable scanner to cancel the job. Note: This attempts to enable the scanner. Scanner jam access cover open Close the bottom ADF access cover to clear the message. Scanner jam, open and close automatic feeder top cover [2yy.
Troubleshooting 285 Some held jobs were not restored From the printer control panel, touch Continue to delete the indicated job. Note: Held jobs that are not restored remain in the printer hard disk and are inaccessible. Standard network software error [54] Try one or more of the following: • From the printer control panel, touch Continue to continue printing. • Turn off the printer, and then turn it back on. • Update the network firmware in the printer or print server.
Troubleshooting 286 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on. Too many trays attached [58] 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the extra trays. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on. Tray [x] paper size unsupported Replace with a supported paper size.
Troubleshooting 287 USB port [x] disabled [56] From the printer control panel, touch Continue to clear the message. Notes: • The printer discards any data received through the USB port. • Make sure the USB Buffer menu is not set to Disabled. Weblink server not set up. Contact system administrator. From the printer control panel, touch Continue to clear the message. Note: If the message appears again, then contact your system support person.
Troubleshooting 288 Action Yes No Step 5 Go to step 6. Make sure to match the following: Check if the cables connecting the printer and the computer are inserted in the correct ports. • The USB symbol on the cable with the USB symbol on the printer Are the cables inserted in the correct ports? • The appropriate Ethernet cable with the Ethernet port Step 6 Make sure the electrical outlet is not turned off by a switch or breaker. Turn on the switch or reset the breaker. Go to step 7.
Troubleshooting 289 Printer display is blank Action Yes No Step 1 The problem is solved. Go to step 2. Press the Sleep button on the printer control panel. Does Ready appear on the printer display? Step 2 Turn off the printer, then wait for about 10 seconds, and then turn the printer back on. The problem is solved. Turn off the printer, and then contact customer support.
Troubleshooting 290 Action Yes No Step 4 a Check if the internal option is selected. The problem is solved. Contact customer support. It may be necessary to manually add the internal option in the printer driver to make it available for print jobs. For more information, see “Adding available options in the print driver” on page 52. b Resend the print job. Does the internal option operate correctly? Internal print server does not operate correctly Action Yes No Step 1 Go to step 2.
Troubleshooting 291 Action Yes Step 2 The problem is solved. Contact customer support. Check the cable and the ISP connection. a Use the correct cable, and then make sure it is securely connected to the ISP. b Check if the ISP solution interface cable is securely connected into the receptacle of the controller board. No Note: The ISP solution interface cable and the receptacle on the controller board are color‑coded.
Troubleshooting 292 Action Yes Step 4 The problem is solved. Contact customer support. Check if the tray is available in the printer driver. No Note: If necessary, manually add the tray in the printer driver to make it available for print jobs. For more information, see “Adding available options in the print driver” on page 52. Is the tray available in the printer driver? USB/parallel interface card does not operate correctly Action Yes No Step 1 Go to step 2.
Troubleshooting 293 Paper frequently jams Action Yes No Step 1 a Pull out the tray, and then do one or more of the following: Go to step 2. The problem is solved. Go to step 3. The problem is solved. • Make sure paper lies flat in the tray. • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray. • Check if the paper guides are aligned against the edges of the paper. • Make sure the paper is below the maximum paper fill indicator.
Troubleshooting 294 Solving print problems Printing problems Confidential and other held jobs do not print Note: Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs. Action Yes No Step 1 Go to step 2. Select one of the Print and Hold options, and then resend the print job. For more information, see “Printing confidential and other held jobs” on page 91.
Troubleshooting 295 Envelope seals when printing Action Yes Contact customer support. Note: Printing on envelopes with high moisture content can seal the flaps. b Resend the print job. a Use envelopes that have been stored in a dry environment. No The problem is solved. Does the envelope seal when printing? Error message about reading the flash drive appears Action Yes No Step 1 Go to step 2. Insert the flash drive into the front USB port.
Troubleshooting 296 Incorrect characters print Action Yes No Step 1 Deactivate Hex Trace mode. Go to step 2. Contact customer support. The problem is solved. Action Yes No Step 1 a Check if you are printing on paper that is supported by the tray. The problem is solved. Go to step 2. Make sure the printer is not in Hex Trace mode. Note: If Ready Hex appears on the printer display, then turn off the printer, and then turn it back on to deactivate Hex Trace mode.
Troubleshooting 297 Large jobs do not collate Action Yes No Step 1 a From the Finishing menu on the printer control panel, set Collate to (1,2,3) (1,2,3). b Resend the print job. The problem is solved. Go to step 2. Did the job print and collate correctly? Step 2 a From the printer software, set Collate to (1,2,3) (1,2,3). The problem is solved. Go to step 3. Note: Setting Collate to (1,1,1) (2,2,2) in the software overrides the setting in the Finishing menu. b Resend the print job.
Troubleshooting 298 Print jobs do not print Action Yes No Step 1 The problem is solved. Go to step 2. a From the document you are trying to print, open the Print dialog and check if you have selected the correct printer. Note: If the printer is not the default printer, then you must select the printer for each document that you want to print. b Resend the print job. Do the jobs print? The problem is solved. Go to step 3.
Troubleshooting 299 Print job takes longer than expected Action Yes No Step 1 The problem is solved. Go to step 2. Change the environmental settings of the printer. a From the printer control panel, navigate to: Settings > General Settings b Select Eco‑Mode or Quiet Mode, and then select Off. Note: Disabling Eco-Mode or Quiet Mode may increase the consumption of energy or supplies, or both. Did the job print? Step 2 The problem is solved. Go to step 3.
Troubleshooting 300 Printing slows down Notes: • When printing using narrow paper, the printer prints at a reduced speed to prevent damage to the fuser. • The printer speed may be reduced when printing for long periods of time, or printing at elevated temperatures. Action Yes No The problem is solved. Go to step 2. Step 1 a Make sure the size of the paper loaded in the tray matches the fuser type.
Troubleshooting Action 301 Yes No The problem is solved. Contact customer Step 2 support. a From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the trays to be linked. Note: The paper size and type must match for trays to be linked. b Resend the print job. Do the trays link correctly? Unexpected page breaks occur Action Yes Increase the printing timeout. a From the home screen, navigate to: The problem is solved.
Troubleshooting 302 Action Yes Step 1 Go to step 2. a Print a font sample list to check if the fonts you are using are supported by the printer. 1 From the printer control panel, navigate to: No The problem is solved. > Reports > Print Fonts 2 Touch PCL Fonts or PostScript Fonts. b Use a font that is supported by the printer or install the font that you want to use. For more information, contact your system support person. c Resend the print job.
Troubleshooting 303 Action Yes No Step 2 Go to step 3. Do one or more of the following: From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray. • Specify the paper size from the tray settings to match the paper loaded in the tray. Do the paper size and type match the paper loaded in the tray? • Change the paper loaded in the tray to match the paper size specified in the tray settings.
Troubleshooting 304 Action Yes No Step 2 a Replace the fuser. For more information on installing the fuser, see the instruction sheet that came with the part. b Resend the print job. The problem is solved. Contact customer support. Do compressed images still appear? Gray background on prints Leading edge ABCDE ABCDE ABCDE Trailing edge Action Yes No Step 1 a From the Quality Menu on the printer control panel, decrease the toner darkness. The problem is solved. Go to step 2.
Troubleshooting 305 Horizontal voids appear on prints Leading edge Trailing edge Action Yes No Step 1 a Make sure your software program is using a correct fill pattern. Go to step 2. The problem is solved. Step 2 Go to step 3. a Load the specified tray or feeder with a recommended type of paper. The problem is solved. b Resend the print job. Do horizontal voids appear on prints? b Resend the print job. Do horizontal voids appear on prints? Step 3 a Redistribute the toner in the imaging unit.
Troubleshooting 306 Incorrect margins on prints ABCD ABCD ABCD Action Yes No The problem is solved. Go to step 2. Step 1 a Move the width and length guides in the tray to the correct positions for the paper size loaded. b Resend the print job. Are the margins correct? Step 2 From the printer control panel, set the paper size in the Paper menu to match the paper loaded in the tray. Does the paper size match the paper loaded in the tray? Go to step 3.
Troubleshooting 307 Paper curl Action Yes No Step 1 Go to step 2. Adjust the width and length guides. Go to step 3. Specify the paper type and weight from the tray settings to match the paper loaded in the tray. Go to step 4. The problem is solved. Go to step 5. The problem is solved. Contact customer support. The problem is solved. Move the width and length guides in the tray to the correct positions for the size of the paper loaded.
Troubleshooting 308 Action Yes No Step 1 a Check if there is packing material left on the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. Go to step 2. The problem is solved. Go to step 3. The problem is solved. Contact customer support. The problem is solved. 2 Check if the packing material is properly removed from the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Troubleshooting 309 Action Yes No Step 1 a Reinstall the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. Go to step 2. The problem is solved. Contact customer support. The problem is solved. Yes No Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. 2 Install the imaging unit, and then the cartridge. b Resend the print job.
Troubleshooting 310 Action Yes Step 4 From the printer Go to step 5. control panel, set the paper texture in the Paper menu to match the paper loaded in the tray. Check if the paper loaded in the tray has texture or rough finishes. Are you printing on textured or rough paper? Step 5 a Load paper from a fresh package. Go to step 6. No The problem is solved. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job.
Troubleshooting Action 311 Yes Go to step 3. Step 2 a From the printer control panel, set the paper type, texture and weight in the Paper menu to match the paper loaded in the tray. b Resend the print job. Is the tray set to the type, texture, and weight of the paper loaded? No Do one or more of the following: • Specify the paper type, texture, and weight from the tray settings to match the paper loaded in the tray.
Troubleshooting 312 Print is too light Action Yes Go to step 2. Step 1 a From the Quality menu on the printer control panel, increase the toner darkness. No The problem is solved. Note: 8 is the factory default setting. b Resend the print job. Is the print still too light? Go to step 3. Change the paper type, texture, and weight to match the paper loaded in the tray. Go to step 4.
Troubleshooting 313 Action Yes No Step 6 a Redistribute the toner in the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. Go to step 7. The problem is solved. Contact customer support. The problem is solved. Yes No 2 Firmly shake the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. 3 Install the imaging unit, and then the cartridge.
Troubleshooting 314 Shadow images appear on prints Leading edge A AB BC CD D A B C D ABCD Trailing edge Action Yes No Step 1 Go to step 2. Load paper with the correct paper type and weight in the tray. Go to step 3. Change the paper loaded in the tray to match the paper type and weight specified in the tray settings. Go to step 4. The problem is solved. Contact customer support. The problem is solved. Load paper with the correct paper type and weight in the tray.
Troubleshooting Action 315 Yes Step 1 Go to step 2. a Move the width and length guides in the tray to the correct positions for the size of the paper loaded. b Resend the print job. No The problem is solved. Is the print still skewed? Step 2 a Check if you are printing on a paper that is supported by the tray. Contact customer support. The problem is solved. Yes No b Resend the print job.
Troubleshooting 316 Action Yes No Step 4 a Reinstall the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. Go to step 5. The problem is solved. Contact customer support. The problem is solved. Yes No Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. 2 Install the imaging unit, and then the cartridge. b Resend the print job.
Troubleshooting 317 Action Yes No Step 3 a Load paper from a fresh package. Go to step 4. The problem is solved. Go to step 5. The problem is solved. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Do streaked vertical lines appear on prints? Step 4 a Reinstall the imaging unit. 1 Remove the toner cartridge, and then the imaging unit.
Troubleshooting 318 Toner rubs off Leading edge ABC DEF Trailing edge Action Yes No Step 1 Go to step 2. Specify the paper type, texture, and weight from the tray settings to match the paper loaded in the tray. Contact customer support. The problem is solved. Action Yes No Replace the imaging unit, and then resend the print job. Contact customer support. The problem is solved. Action Yes No Step 1 Go to step 2. Set the paper type to Transparency. Contact customer support.
Troubleshooting 319 Uneven print density Action Yes No Replace the imaging unit, and then resend the print job. Contact customer support. The problem is solved. Action Yes No Step 1 a Make sure your software program is using a correct fill pattern. Go to step 2. The problem is solved. Go to step 3. Step 2 a From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray. b Resend the print job. The problem is solved.
Troubleshooting 320 Action Yes No Step 4 a Redistribute the toner in the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. Go to step 5. The problem is solved. Contact customer support. The problem is solved. Action Yes No Step 1 Clear the error or status Go to step 2. message. 2 Firmly shake the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.
Troubleshooting 321 Partial document or photo copies Action Yes No Step 1 Go to step 2. Place the document or photo facedown on the scanner glass in the upper left corner. Go to step 3. Change the paper size setting to match the paper loaded in the tray, or load the tray with paper that matches the paper size setting. Check the placement of the document or photo. Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
Troubleshooting 322 Action Yes No Step 4 Go to step 5. See “Print quality problems” on page 301. Go to step 6. Place the document or photo facedown on the scanner glass in the upper left corner. Go to step 7. Change the Content Type and Content Source settings to match the document being scanned. Go to step 8. The problem is solved. Go to step 9. The problem is solved. Send a print job, and then check for print quality problems. a From the General Settings menu, adjust the Eco‑Mode settings.
Troubleshooting 323 Action Yes No Step 9 Contact customer support. The problem is solved. Action Yes No Check if there are no obstructions between the scanner unit and the printer. a Lift the scanner unit. The problem is solved. Contact customer support. Check for washed‑out or overexposed output. a From the Copy screen, navigate to: Advanced Options > Advanced Imaging b Adjust the settings of the following: • Background Removal—Reduce the current setting.
Troubleshooting 324 Caller ID is not shown Action Yes No Contact your telephone company to check if your telephone line is subscribed to the caller ID service. The problem is solved. Contact customer support. Notes: • If your region supports multiple caller ID patterns, then you may have to change the default setting. There are two settings available: FSK (pattern 1) and DTMF (pattern 2).
Troubleshooting 325 Action Yes No Step 5 a Check the telephone wall jack. 1 Plug the telephone cable into the wall jack. The problem is solved. Go to step 6. 2 Listen for a dial tone. 3 If you do not hear a dial tone, then plug a different telephone cable into the wall jack. 4 If you still do not hear a dial tone, then plug the telephone cable into a different wall jack. 5 If you hear a dial tone, then connect the printer to that wall jack. b Try sending or receiving a fax.
Troubleshooting 326 Action Yes No Step 8 The problem is solved. Go to step 9. Temporarily disconnect other equipment (such as answering machines, computers with modems, or telephone line splitters) between the printer and the telephone line, and then try sending or receiving a fax. Can you send or receive a fax? The problem is solved. Go to step 10. Step 9 a Temporarily disable call waiting. Contact your telephone company to obtain the keypad sequence for temporarily disabling call waiting.
Troubleshooting 327 Action Yes No Step 2 The problem is solved. Go to step 3. Load the original document properly. Load the original document faceup, short edge first into the ADF tray or facedown on the scanner glass in the upper left corner. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. Can you send faxes? Step 3 Set up the shortcut number properly.
Troubleshooting 328 Action Yes Step 3 The problem is solved. Contact customer support. Replace the toner cartridge. For more information, see the instruction sheet that came with the supply. No Can you receive faxes? Fax and e-mail functions are not set up Notes: • Before you troubleshoot, check if the fax cables are connected. • The indicator light is blinking red until you set up fax and e‑mail. Action Yes No The problem is solved. Contact customer support.
Troubleshooting 329 Action Yes No Step 2 The problem is solved. Go to step 3. Decrease the incoming fax transmission speed. a Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly.
Troubleshooting 330 Cannot scan from a computer Action Yes No Step 1 Go to step 3. Go to step 2. Clear the error message. Go to step 3. Make sure the printer is turned on and that Ready appears on the printer display before scanning a job. Does Ready appear before scanning the job? Step 2 Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.
Troubleshooting 331 Action Yes No Step 3 Go to step 4. See “Cleaning the scanner glass” on page 237. Go to step 5. Place the document or photo facedown on the scanner glass in the upper left corner. Go to step 6. See “Print quality problems” on page 301. Go to step 7. Change the Content Type and Content Source settings to match the document being scanned. Problem solved. Contact customer support. Action Yes No Step 1 Go to step 2. Connect the cables properly. Change the file name.
Troubleshooting 332 Action Yes No Step 3 Close the file you are scanning. Go to step 4. Check if the document or photo you want to scan is open in another application or being used by another user. Is the file you want to scan open by another application or user? Contact customer Check if either the Append time stamp or the Overwrite existing file check support. box is selected in the destination configuration settings.
Troubleshooting 333 The scanner does not respond Action Yes No Step 1 Go to step 2. Turn on the printer. Go to step 3. Connect the printer cable securely to the printer and the computer, print server, option, or other network device. Go to step 4. Connect the power cord to the printer and a properly grounded electrical outlet. Turn on the switch or reset the breaker. Go to step 5. Check if the printer is turned on.
Troubleshooting 334 Solving home screen application problems An application error has occurred Action Yes No Step 1 Go to step 2. Contact customer support. Check the system log for relevant details. a Open a Web browser, and then type the printer IP address in the address field. If you do not know the IP address of the printer, then you can: • View the IP address on the printer home screen.
Troubleshooting 335 Action Yes No Step 3 Go to step 4. Contact your system support person. Go to step 5. Tighten the cable connection. Go to step 6. Contact your system support person. Check if the network connection is working. Is the network connection working? Step 4 Make sure the cable connections to the printer and print server are secure. For more information, see the setup documentation that came with the printer.
Notices 336 Notices Product information Product name: Lexmark MX710, MX711 Machine type: 7463 Model(s): 032, 036, 037, 232, 236, 237 Edition notice August 2014 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Notices 337 Trademarks Lexmark, Lexmark with diamond design, MarkNet, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. ScanBack is a trademark of Lexmark International, Inc. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. PCL® is a registered trademark of the Hewlett-Packard Company.
Notices Univers 338 Linotype-Hell AG and/or its subsidiaries All other trademarks are the property of their respective owners. AirPrint and the AirPrint logo are trademarks of Apple, Inc. Federal Communications Commission (FCC) compliance information statement This product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
Notices 339 Waste from Electrical and Electronic Equipment (WEEE) directive The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.
Notices 340 ENERGY STAR Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark. Temperature information Ambient operating temperature 15.6 to 32.2°C (60 to 90°F) Shipping temperature -40 to 43.3°C (-40 to 110°F) Storage temperature and relative humidity 1 to 35°C (34 to 95°F) 8 to 80% RH Laser notice The printer is certified in the U.S.
Notices 341 DANGER - Invisible laser radiation when cartridges are removed and interlock defeated. Avoid exposure to laser beam. PERIGO - Radiação a laser invisível será liberada se os cartuchos forem removidos e o lacre rompido. Evite a exposição aos feixes de laser. Opasnost - Nevidljivo lasersko zračenje kada su kasete uklonjene i poništena sigurnosna veza. Izbjegavati izlaganje zracima. NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, ze zařízení je vysíláno neviditelné laserové záření.
Notices 342 Sleep Mode This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout. Factory default Sleep Mode Timeout for this product (in minutes): 20 By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 120 minutes.
Notices 343 Japanese VCCI notice European Community (EC) directives conformity This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 2011/65/EU on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, and on the restrictions of use of certain hazardous substances in electrical and electronic equipment.
Notices 344 A plug and jack used to connect this equipment to the premises’ wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See your setup documentation for more information.
Notices 345 an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all the devices does not exceed five. The modem REN is located on the rear of the equipment on the product labeling. Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem.
Notices 346 • The equipment shall be set to ensure that automatic calls to different numbers are spaced such that there is not less than 5 seconds between the end of one call attempt and the beginning of another. Japanese telecom notice The installed optional modem is in compliance with Japanese Telecommunication Law and has been Certified by JATE, with Certification Number A11-0160001. Lexmark International, Inc.
Notices 347 electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, and on the restrictions of use of certain hazardous substances in electrical and electronic equipment. Compliance is indicated by the CE marking. The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft.
Notices 348 Industry Canada (Canada) Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles risquant d'altérer son fonctionnement. Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne est strictement interdite par la réglementation d'Industry Canada.
Notices 349 Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only. The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
Notices Malti 350 Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE. Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Norsk Lexmark International, Inc.
Notices 351 Limited warranty service The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed.
Notices 352 MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE. Limitation of liability Your sole remedy under this limited warranty is set forth in this document.
Notices 353 The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Suite B Cryptographic Suites for IPSec implemented in the product or service. The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp.
Index 354 Index Numerics 2100‑sheet tray installing 47 loading paper 66 250‑sheet tray installing 47 loading 59 550‑sheet tray installing 47 loading 59 Symbols [x]‑ page jam, open upper rear door. [202] 260 [x]‑page jam, clear manual feeder. [250] 266 [x]‑page jam, lift front cover to remove cartridge. [200–201] 257 [x]‑page jam, open automatic feeder top cover. [28y.xx] 268 [x]‑page jam, open tray [x]. [24x] 265 [x]‑page jam, open upper and lower rear door.
Index Configure MP menu 145 configuring supply notifications, imaging unit 252 supply notifications, maintenance kit 252 supply notifications, toner cartridge 252 configuring e‑mail settings 106 configuring port settings 56 configuring supply notifications 252 connecting printer to distinctive ring service 127 connecting to a wireless network using PIN (Personal Identification Number) method 55 using Push Button Configuration method 55 using the Embedded Web Server 56 using wireless setup wizard 55 conserv
Index distinctive ring service, fax connecting to 127 documents, printing from Macintosh 87 from Windows 87 DSL filter 119 duplexing 98 E Eco‑Mode setting 228 Edit Security Setups menu 170 embedded solutions information erasing 233 Embedded Web Server accessing 20 administrator settings 251 checking the status of parts 239 checking the status of supplies 239 creating a fax destination shortcut 130 creating an FTP shortcut 137 creating e‑mail shortcuts 107 initial fax setup 114 modifying confidential print
Index Fax Station Number not set up. Contact system administrator.
Index J jams accessing 255 avoiding 254 messages 255 jams, clearing behind rear door 261 duplex 264 in automatic document feeder top cover 268 in manual feeder 266 in tray [x] 265 inside the printer 257 rear door 260 standard bin jam 263 Job Accounting menu 218 L labels, paper tips 80 letterhead copying on 96 loading, 2100‑sheet tray 66 loading, multipurpose feeder 72, 80 loading, trays 59, 80 light, indicator 15 line filter 119 LINE port 50 linking trays 76, 77 Load [paper source] with [custom string] [p
Index MyShortcut about 23 N Network [x] menu 158 Network [x] software error [54] 279 Network Card menu 160 Network Reports menu 159 network settings Embedded Web Server 251 network setup page printing 58 Networking Guide where to find 251 No analog phone line connected to modem, fax is disabled. 279 noise emission levels 338 Non‑Lexmark [supply type], see User’s Guide [33.
Index print is too dark 310 print is too light 312 printer is printing solid black pages 308 repeating defects appear on prints 313 shadow images appear on prints 314 skewed print 314 streaked horizontal lines appear on prints 315 streaked vertical lines 316 toner fog or background shading 317 toner rubs off 318 toner specks appear on prints 318 transparency print quality is poor 318 uneven print density 319 white streaks 319 print troubleshooting envelope seals when printing 295 error reading flash drive
Index Insufficient memory, some Held Jobs were deleted [37] 276 Insufficient memory, some held jobs will not be restored [37] 276 Load [paper source] with [custom string] [paper orientation] 276 Load [paper source] with [custom type name [paper orientation] 276 Load [paper source] with [paper size] [paper orientation] 277 Load [paper source] with [paper type] [paper size] [paper orientation] 277 Load Manual Feeder with [custom string] [paper orientation] 277 Load Manual Feeder with [custom type name] [pape
Index network setup page 58 printing a directory list 92 printing a document 87 printing a font sample list 92 printing a menu settings page 57 printing a network setup page 58 printing confidential and other held jobs from a Macintosh computer 91 from Windows 91 printing forms 87 printing from a flash drive 88 printing from a mobile device 90 printing slows down 300 publications where to find 9 Push Button Configuration method using 55 Q Quality menu 218 Quiet Mode 228 R recipient(s) e‑mail options 110
Index Scanner jam, open and close automatic feeder top cover [2yy.xx] 284 Scanner jam, remove all originals from the scanner [2yy.xx] 284 Scanner jam, remove jammed originals from the scanner [2yy.
Index toner cartridge replacing 243, 245 toner cartridges ordering 240 recycling 231 toner darkness adjusting 87 Too many disks installed [58] 285 Too many flash options installed [58] 285 Too many trays attached [58] 286 touch screen buttons 18 transparencies copying on 95 loading 72 tips 81 tray loading 59 Tray [x] paper size unsupported 286 trays linking 76, 77 unlinking 76, 77 troubleshooting an application error has occurred 334 cannot open Embedded Web Server 334 checking an unresponsive printer 287
Index using shortcuts sending fax 129 using the address book 108 sending fax 130 using the touch‑screen buttons 18 Utilities menu 220 V verify print jobs 90 printing from a Macintosh computer 91 printing from Windows 91 vertical voids appear 319 viewing reports 251 viewing a fax log 132 virtual display checking, using Embedded Web Server 251 voice mail setting up 115 Voice over Internet Protocol (VoIP) fax setup 120 voids appear 319 VoIP adapter 120 volatile memory 232 erasing 232 volatility statement of