Operation Manual
Use To
Screen Brightness
20–100
Specify the brightness of the display.
Note: 100 is the factory default setting.
One Page Copy
Off
On
Set copies from the scanner glass to only one page at a time.
Note: Off is the factory default setting.
Output Lighting
Normal/Standby Mode
Off
Dim
Bright
Set the output lighting for the standard bin.
Notes:
• Dim is the factory default setting if Eco-Mode is set to
Energy or Energy/Paper.
• Bright is the factory default setting if Eco-Mode is Off or set
to Paper.
Error Lighting
On
Off
Enable the indicator light to blink red when the printer encounters
an error.
Note: On is the factory default setting.
Audio Feedback
Button Feedback
On
Off
Volume
1–10
Set the audio volume for the buttons.
Notes:
• On is the factory default setting for Button Feedback.
• 5 is the factory default setting for Volume.
Tactile Touchscreen Feedback
On
Off
Enable touch‑screen sensation feedback.
Note: On is the factory default setting.
Show Bookmarks
Yes
No
Specify whether bookmarks are displayed from the Held Jobs area.
Note: Yes is the factory default setting.
Allow Background Removal
On
Off
Specify whether image background removal is allowed.
Note: On is the factory default setting.
Allow Custom Job Scans
On
Off
Scan multiple jobs to one file.
Note: On is the factory default setting. If On is selected, then the
Allow Custom Job Scans setting can be enabled for specific jobs.
Scanner Jam Recovery
Job level
Page level
Specify how a scanned job should be reloaded if a paper jam occurs
in the ADF.
Notes:
• Job level is the factory default setting.
• If Job level is selected, then the entire job must be
rescanned if any pages jam.
• If Page level is selected, then rescan from the jammed page
forward.
Understanding the printer menus 181