Operation Manual

Use To
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Set the printer to restart when an error occurs
Note: Reboot always is the factory default setting.
Error Recovery
Max Auto Reboots
1–20
Determine the number of automatic reboots the printer can
perform.
Note: 2 is the factory default setting.
Print Recovery
Auto Continue
Disabled
5–255
Let the printer automatically continue printing from certain offline
situations when these are not resolved within the specified time
period.
Note: Disabled is the factory default setting.
Print Recovery
Jam Recovery
On
Off
Auto
Specify whether the printer reprints jammed pages.
Note: Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the pages is
needed for other printer tasks.
Print Recovery
Jam Assist
On
Off
Set the printer to automatically check for jammed paper.
Note: On is the factory default setting.
Print Recovery
Page Protect
Off
On
Successfully print a page that may not have printed otherwise.
Notes:
• Off is the factory default setting. This prints a partial page
when there is not enough memory to print the whole page.
• On sets the printer to process the whole page so that the
entire page prints.
Press Sleep Button
Do Nothing
Sleep
Hibernate
Determine how the printer, when in idle state, reacts to a short
press of the Sleep button.
Notes:
• Sleep is the factory default setting.
• Touch anywhere on the display or press a button on the
control panel to exit Sleep or Hibernate mode.
Press and Hold Sleep Button
Do Nothing
Sleep
Hibernate
Determine how the printer, when in idle state, reacts to a long
press of the Sleep.
Notes:
• Do Nothing is the factory default setting.
• Touch anywhere on the display or press a button on the
control panel to exit Sleep or Hibernate mode.
Understanding the printer menus 184