Operation Manual

Use To
Portrait Width
3–8.5 inches
76–216 mm
Set the portrait width.
Notes:
• If the width exceeds the maximum, then the printer uses the
maximum width allowed.
• 8.5 inches is the US factory default setting. You can increase the
width in 0.01‑inch increments.
• 216 mm is the international factory default setting. You can increase
the width in 1‑mm increments.
Portrait Height
3–14.17 inches
76–360 mm
Set the portrait height.
Notes:
• If the height exceeds the maximum, then the printer uses the
maximum height allowed.
• 14 inches is the US factory default setting. You can increase the
height in 0.01‑inch increments.
• 356 mm is the international factory default setting. You can increase
the height in 1‑mm increments.
Feed Direction
Short Edge
Long Edge
Specify the feed direction if the paper can be loaded in either direction.
Notes:
• Short Edge is the factory default setting.
• Long Edge appears only when the longest edge is shorter than the
maximum width supported in the tray.
Reports Menu
Reports menu
Use To
Menu Settings Page Print a report on the current printer menu settings. The report also contains
information about the status of the supplies and a list of hardware options that
are successfully installed.
Device Statistics Print a report containing printer statistics, such as supply information and number
of printed pages.
Network Setup Page Print a report containing information about the network settings of the printer.
Note: This menu item appears only in network printers or printers connected
to print servers.
Network [x] Setup Page Print a report containing information about the network settings of the printer.
Note: This menu item appears only in network printers or printers connected
to print servers, and when there is more than one network option installed.
Shortcut List Print a report containing information about configured shortcuts.
Understanding the printer menus 156