International Setup Guide Printer T620, T622

3 Place the tips of the wire paper bail into the

ends of the plastic bracket so that the bail

curves downward.

The bail rests in the printer output tray.

4 Attach the top cover to the finisher.

Installing an output expander Each output expander consists of the expander

and a removable tray. A paper bail, bracket, and

labels are also included.

After you carefully unpack the output expander,

install it immediately; otherwise, the edges of the

mounting brackets could damage tabletops or fab-

rics.

Warning! The output expander tray is designed to hold the

weight of print material only. Do not use it as a shelf;

excess weight may cause it to disengage from the

output expander.

1 Remove the top cover from the printer, fin-

isher, or high-capacity output stacker.

Note: If you have purchased a finisher or a high-

capacity output stacker, that output option

must be installed directly on the printer,

before the output expander.

Plastic

bracket

Wire paper bail

Lexmark T Family

label

Bracket and bail

Labels

Tr ay

Output expander