Operation Manual

Step 5: Customize the photo

You can adjust the photo settings before you print. If you want to:

• Crop the photo, see page 18.

• Adjust the brightness, see page 19.

• Change the number of prints, press Number Of Prints.

• Change the print quality, see page 23.

• Change the blank paper size, see page 22.

Step 6: To select another photo, repeat steps 4

and 5.

When you are finished selecting your photo(s), continue with step 7.

Step 7: Print photo(s)

Press Start.

If Preview before Print is on, a preview of the print job is first displayed.

Press

Start again to print the photo.

If Preview before Print is off, the photo prints immediately.

Note: To adjust the Preview setting, see page 23.

Step 8: Remove the memory card

Warning: Do not remove the memory card while the light is

blinking. The light blinks to indicate the memory card is

being read or is transmitting data.