Operation Manual

46
Card problem The memory card was
inserted incorrectly or is
damaged.
1 Verify that there is no
damage to the memory
card.
2 Insert the card correctly.
See page 12.
A second memory card has
been detected.
Only one memory card may
be used at one time.
Remove the second card.
No images The memory card has no
supported images.
Use a different memory card
containing photos.
Card format The memory card formatting
is not supported.
Reformat the memory card
in your digital camera.
For help, see your digital
camera documentation.
PictBridge
port
The device attached to the
PictBridge port is not
supported.
1 Remove the device.
2 Use a PictBridge-enabled
digital camera in the
PictBridge port.
The PictBridge-enabled
digital camera is not set to
the correct USB mode.
Refer to your digital camera
documentation for help
selecting the correct USB
mode.
Size warning The paper size selected
does not match the size of
the photo paper in the paper
support.
Verify the printer setting
matches your blank paper
size. See page 22.
Note: An index page can
only be printed on 4 x 6
photo paper.
Error Message What it indicates Solution