Printer User Manual

PCL

2-38

on page 2-43 to select a symbol set. If a symbol set does not have a PJL value, use

the symbol set ID to select the symbol set. A font selection can be either temporary or

set as the default.

Use the following PJL commands to select fonts: FONTSOURCE, FONTNUMBER,

PITCH, PTSIZE, SYMSET, SET, DEFAULT. See “Table 3-5: Common Variables for

PCL Emulation” on page 3-48 for more information about these commands.

Forward and Backward Compatibility Modes for the

Lexmark E234(n), E330, and E332n

Your PCL emulation has forward and backward compatibility modes. The forward

compatibility mode is used to emulate the fonts in the Hewlett-Packard Company’s

LaserJet 4050. The backward compatibility mode is used for compatibility with the

Hewlett-Packard Company’s LaserJet 5 and the Lexmark family of printers.

Standard PCL Emulation Fonts

The following table lists the font selection commands for forward and backward

compatibility mode for each of the 47standard PCL emulation fonts. Since the font

selection commands for the forward and backward compatibility modes are identical,

they are listed together in the table.

Table 2-20: Forward and Backward Compatibility Font Selection Commands

Standard PCL Emulation Font Name

Forward and Backward Compatibility Mode

Spacing Style Weight Typeface

Courier 0004099

Courier Italic 0104099

Courier Bold 0034099

Courier Bold Italic 0134099

CG Times 1004101

CG Times Italic 1104101

CG Times Bold 1034101

CG Times Bold Italic 1134101

Univers Medium 1004148

Univers Medium Italic 1104148

Univers Bold 1034148

This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050.