Service Manual

2-66 Service Manual
4062
245.68 Pick motor stop error
Source = Media tray 5
Pick motor stop error detected
by options tray x
1. Remove all media present
in media path.
2. Ensure media tray is not
overfilled.
3. Check all connections on
the pick arm assembly.
4. Check all connections on
the system card assembly.
5. Replace the pick arm
assembly if problem
remains. Go to “Operator
panel door assembly
removal (models X651,
X652, X654, and X656)”
on page 4-49.
6. Replace system card
assembly if problem
remains. Go to “System
card assembly removal
(T650, T652, T654, T656)”
on page 4-76.
245.69 Pick motor control
failure.
Source = Media tray 5
The pick motor does not reach
the proper operating speed at
the specified time.
1. Remove all media present
in media path.
2. Ensure media tray is not
overfilled.
3. Check all connections on
the pick arm assembly.
4. Check all connections on
the system card assembly.
5. Replace the pick arm
assembly if problem
remains. Go to “Operator
panel door assembly
removal (models X651,
X652, X654, and X656)”
on page 4-49.
6. Replace system card
assembly if problem
remains. Go to “System
card assembly removal
(T650, T652, T654, T656)”
on page 4-76.
250.00 MPF area jam
Source = MPF
The media is jammed in the
MPF area.
Go to sensor (input) service
check.
See “Sensor (input) service
check” on page 2-126.
250.03 Sensor (input) late
jam
Source = MPF
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-129.
250.06 Sensor (input) late
jam
Source = MPF
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-129.
Error
code or
message
Error contents Description/Action Possible repair actions