Service Manual

Diagnostic information 2-67
4062
250.07 Sensor (input) late
jam
Source = MPF
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-129.
250.08 Sensor (input) late
jam
Source = MPF
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-129.
250.09 Sensor (input) late
jam
Source = MPF
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-129.
250.10 Sensor (input) late
jam
Source = MPF
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-129.
250.11 Sensor (input) late
jam
Source = MPF
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-129.
260.00 Envelope feeder area
jam
The media is jammed in the
envelope feeder area.
1. Remove the envelope
feeder.
2. Remove all media present
in media path.
3. Check media for proper
installation.
4. Check for obstructions in
media path.
5. Go to sensor (input) service
check. See “Sensor
(input) service check” on
page 2-126.
260.01 Envelope feeder
assembly error
Mechanical feed error or timing
error.
1. Remove the envelope
feeder.
2. Remove all media present
in media path.
3. Check media for proper
installation.
4. Check for obstructions in
media path.
5. Ensure the envelope feeder
assembly is properly
installed.
6. Check all connections on
the envelope feeder
assembly.
7. Replace the envelope
feeder assembly if problem
remains.
Error
code or
message
Error contents Description/Action Possible repair actions