Service Manual

Diagnostic information 2-69
4062
260.07 Sensor (input) late
jam
Source = Envelope
feeder
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-129.
260.10 Sensor (input) late
jam
Source = Envelope
feeder
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-129.
260.11 Sensor (input) late
jam
Source = Envelope
feeder
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-129.
260.12 Sensor (input) late
jam
Source = Envelope
feeder
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-129.
260.13 sensor (envelope
feeder pass through)
static jam
Media remains on the sensor
(envelope feeder pass through)
during the warm up sequence.
1. Remove the envelope
feeder.
2. Remove all media present
in media path.
3. Replace the envelope
feeder is problem remains.
260.14 Sensor (input) late
jam
Source = Envelope
feeder
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-129.
260.15 Sensor (input) late
jam
Source = Envelope
feeder
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-129.
260.16 Sensor (input) late
jam
Source = Envelope
feeder
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-129.
271.03
x = bin
number
Sensor (output pass
through) lingering jam
Applies to:
High capacity output
Ou
tput expander
The media reached the sensor
(output pass through) but did
not clear it in the specified time.
See “Sensor (output pass
through) lingering jam
service check” on
page 2-151.
Error
code or
message
Error contents Description/Action Possible repair actions