Service Manual

2-70 Service Manual
4062
271.04
x = bin
number
Sensor (output pass
through) late jam
Applies to:
High capacity output
Output expander
The media is late reaching the
sensor (output pass through)
within the specified time.
See “Sensor (output pass
through) late jam service
check” on page 2-150.
271.05
x = bin
number
Sensor (output pass
through) lingering jam
Applies to:
High capacity output
Output expander
The media reached the sensor
(output pass through) but did
not clear it in the specified time.
See “Sensor (output pass
through) lingering jam
service check” on
page 2-151.
27x.14
x = bin
number
Sensor (output pass
through) static jam
Applies to:
High capacity stacker
Mailbox
Offset stacker
Output expander
Sensor (mailbox
empty) static jam
Applies to:
Mailbox
Media remains on the sensor
(output pass through) during
the warm up sequence.
Media remains on the sensor
(mailbox empty) during the
warm up sequence.
See “Sensor (output pass
through) static jam service
check” on page 2-152.
See “Sensor (mailbox empty)
static jam service check” on
page 2-154.
27x.15
x = bin
number
Sensor (output pass
through) static jam
Applies to:
High capacity stacker
Mailbox
Offset stacker
Output expander
Sensor (mailbox
empty) static jam
Applies to:
Mailbox
Media remains on the sensor
(output pass through) during
the warm up sequence.
Media remains on the sensor
(mailbox empty) during the
warm up sequence.
See “Sensor (output pass
through) static jam service
check” on page 2-152.
See “Sensor (mailbox empty)
static jam service check” on
page 2-154.
27x.29
x = bin
number
Sensor (output pass
through) lingering jam
Applies to:
Offset stacker
Mailbox
Output expander
High capacity stacker
The media reached the sensor
(output pass through) but did
not clear it in the specified time.
See “Sensor (output pass
through) lingering jam
service check” on
page 2-151.
Error
code or
message
Error contents Description/Action Possible repair actions