Service Manual

2-72 Service Manual
4062
27x.53
x = bin
number
Sensor (mailbox
empty) late jam
Applies to:
Mailbox
The media is late reaching the
sensor (mailbox empty) within
the specified time.
See “Sensor (mailbox empty)
late jam service check” on
page 2-153
27x.54
x = bin
number
Sensor (output pass
through) lingering jam
Applies to:
Mailbox
The media reached the sensor
(output pass through) but did
not clear it in the specified time.
See “Sensor (output pass
through) lingering jam
service check” on
page 2-151.
27x.55
x = bin
number
Sensor (mailbox
empty) lingering jam
Applies to:
Mailbox
The media reached the sensor
(mailbox empty) but did not
clear it in the specified time.
See “Sensor (mailbox empty)
lingering jam service check”
on page 2-154.
27x.58
x = bin
number
Sensor (output pass
through) late jam
Applies to:
Mailbox
High capacity stacker
Offset stacker
Output expander
The media is late reaching the
sensor (output pass through)
within the specified time.
See “Sensor (output pass
through) late jam service
check” on page 2-150.
28x.25
x = bin
number
Invalid ejector motor
manager status.
Applies to:
StapleSmart finisher
A software failure has occurred
with the output option.
1. Turn the machine off/on.
2. Replace the output option if
problem remains.
28x.26
x = bin
number
Timer 0 overflow (1ms
timer did not get
serviced for an entire
1ms)
Applies to:
StapleSmart finisher
A software failure has occurred
with the output option.
1. Turn the machine off/on.
2. Replace the output option if
problem remains.
28x.27
x = bin
number
Invalid paddle motor
manager status.
Applies to:
StapleSmart finisher
A software failure has occurred
with the output option.
1. Turn the machine off/on.
2. Replace the output option if
problem remains.
28x.28
x = bin
number
Invalid main motor
manager state
Applies to:
StapleSmart finisher
A software failure has occurred
with the output option.
1. Turn the machine off/on.
2. Replace the output option if
problem remains.
28x.29
x = bin
nu
mber
Sensor (stapler pass
through) lingering jam
Applies to:
StapleSmart finisher
The media reached the sensor
(stapler pass through) but did
not clear it in the specified time.
See “Sensor (stapler pass
through) lingering jam
service check” on
page 2-149.
Error
code or
message
Error contents Description/Action Possible repair actions