Service Manual

Repair Information 4-9

4062-XXX

3. Remove the metal cover.

4. Remove the inner deflector. Go to “Inner deflector removal (T650, T652, T654)” on page 4-25.

5. Remove the MPF pick solenoid assembly. Go to “MPF pick solenoid assembly removal (T650, T652,

T654)” on page 4-39.

6. Remove the two screws (B) securing the alignment assembly to the machine.

Note: The adjuster screw (C) requires a hex wrench to loosen and tighten.

Note: The adjuster screw (C) can be accessed through the hole (D) in the system card.

7. Completely loosen the adjuster screw (C) securing the alignment assembly to the machine.