Service Manual

Diagnostic information 2-45
4062
242.03 Sensor (pass through)
late jam
Source = Tray 2
The media is late reaching the
sensor (pass through) within
the specified time.
Go to sensor (pass through)
late jam service check.
See “Sensor (pass through)
late jam service check” on
page 2-145.
242.04 Sensor (pass through)
late jam
Source = Tray 2
The media is late reaching the
sensor (pass through) within
the specified time.
Go to sensor (pass through)
late jam service check.
See “Sensor (pass through)
late jam service check” on
page 2-145.
242.05 Sensor (pass through)
late jam
Source = Tray 2
The media is late reaching the
sensor (pass through) within
the specified time.
Go to sensor (pass through)
late jam service check.
See “Sensor (pass through)
late jam service check” on
page 2-145.
242.06 Sensor (pass through)
late jam
Source = Tray 2
The media is late reaching the
sensor (pass through) within
the specified time.
Go to sensor (pass through)
late jam service check.
See “Sensor (pass through)
late jam service check” on
page 2-145.
242.08 Sensor (pass through)
lingering jam
Source = Tray 2
Media reached the sensor
(pass through) within the
specified time but did not clear
it within the specified time.
Go to sensor (pass through)
lingering jam service check.
See “Sensor (pass through)
lingering jam service check.”
on page 2-146.
242.09 Sensor (input) late
jam
Source = Tray 2
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-129.
242.10 sensor (pass through)
late jam
Source = Tray 2
The media is late reaching the
sensor (pass through) within
the specified time.
Go to sensor (pass through)
late jam service check.
See “Sensor (pass through)
late jam service check” on
page 2-145.
242.13 Sensor (pass through)
static jam
Source = Tray 2
Media remains on the sensor
(input) during the warm up
sequence.
Go to sensor (pass through)
static jam service check.
See “Sensor (pass through)
static jam service check” on
page 2-147.
242.16 sensor (pass through)
late jam
Source = Tray 2
The media is late reaching the
sensor (pass through) within
the specified time.
Go to sensor (pass through)
late jam service check.
See “Sensor (pass through)
late jam service check” on
page 2-145.
242.17 Media tray pulled jam
Source =
Tray 2
A media tray above the source
tray was pulled during the
printing process.
1. Remove all media present
in media path.
2. Close all media trays.
Error
code or
message
Error contents Description/Action Possible repair actions